Anden/Aprilaire

Grow environments require high-capacity, specially-designed dehumidifiers to control humidity and protect crops. The Anden Model A130 delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop.  The Model A130 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control • Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module • Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820) • Control and monitor climate conditions in your grow room 24/7/365 from anywhere Features: No assembly, plug and play Moveable with casters & built in handles for easy maneuvering Control: Built-in digital control with display Cabinet insulation: ½" EPS Filter Washable: MERV 8 Refrigerant: R410A Power cord length: 8' Discharge air temperature rise 10°F–30°F Drain connection: ¾" MNPT threaded Warranty: 5 years Designed Engineered & assembled in Wisconsin Removes up to 130 pints of moisture per day   Specs: Capacity: 130 PPD Energy Factor: 2.9 L/kW-h (6.1 pints/kWh) BTU/h: 9,375 Power (Watts): 900 Watts Voltage, phase, frequency: 120VAC, 1, 60 Hz Current draw: 8.3 Amps Noise: 60 dBA Dimensions: 12.5” W X 14.5” H (17” w/casters on) X 27.5 L Weight: 70 lbs Drain Connection: ¾” MNPT Threaded Filter: Disposable MERV 11 Refrigerant: R410A Coil Type: Aluminum Warranty: 5 Years on all parts including refrigeration system.   Included Items: Drain Fitting: ¾” MPT x ¾” barbed 10 ft. Drain tubing: ¾” ID Manual: Installation instructions & Owner’s manual

Read more less

320 Pints Per Day, 208-240VAC. Anden A320V1Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth potential. Better. Removes up to 2.9 liters per kilowatt hour, for maximum energy efficiency.Faster. Reaches maximum performance in under 3 minutes for maximum moisture removal.Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics.   Anden advanced features: Self-sealing air filter for efficient protection of components; with easy access for replacementIncluded hanging kit doubles as lifting handles, provides easy, flexible installationPre-installed electrical plug is easily removable for hard wired application, providing flexible installationsFloat switch terminals for easy set-up76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor   Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.   A320v1 SPECS: Capacity: 320 PPD Energy Factor: 2.9 L/kWh - 6.0 pints/kWh Voltage: 208–240VAC, 1 Phase, 60 Hz BTU: 4,156 Current draw (amps)(1): 11.1 Power (watts)(1): 2,309 Weight: 180 lbs. Width: 32⅝"- Height: 24"- Length: 24¼" Warranty: 5 Years on all parts   INCLUDED ITEMS: Dehumidifier Filter Hanging Brackets A76 Control Drain Fittings Drain Tubing Thermostat wire Drain Trap Screw Driver

Read more less

320 Pints Per Day, 277VAC. Anden A320V3 Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth potential Better. Removes up to 2.6 liters per kilowatt hour, for maximum energy efficiency.Faster. Reaches maximum performance in under 3 minutes for maximum moisture removal.Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics.   Anden advanced features:   Self-sealing air filter for efficient protection of components; with easy access for replacement Included hanging kit doubles as lifting handles, provides easy, flexible installation Pre-installed electrical plug is easily removable for hard wired application, providing flexible installations Float switch terminals for easy set-up 76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor   Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.     A320v3 SPECS: Capacity: 320 PPD Energy Factor: 2.6 L/kWh - 5.5 pints/kWh Voltage: 208–240VAC, 1 Phase, 60 Hz BTU: 4,156 Current draw (amps)(1): 9.1 Power (watts)(1): 2,309 Weight: 180 lbs. Width: 32⅝"- Height: 24"- Length: 24¼" Warranty: 5 Years on all parts   INCLUDED ITEMS: Dehumidifier Filter Hanging Brackets A76 Control Drain Fittings Drain Tubing Thermostat wire Drain Trap Screw Driver

Read more less

Grow environments require high-capacity, specially-designed dehumidifiers to control humidity and protect crops. The Anden Model A130 delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop. The Model A130 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control• Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module• Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820)• Control and monitor climate conditions in your grow room 24/7/365 from anywhereOptional Hanging Kit – DH35660 (Model 5691) Features: Control: Built-in digital control with display Control mounting option: Field interchangeable from top to front Cabinet insulation: ½" EPS Air discharge orientation: Top or end Inlet/Outlet duct collars: 10" diameter Backdraft damper at outlet: Included Filter Washable: MERV 8 Refrigerant: R410A Coil type: E-coated Power cord length: 8' Discharge air temperature rise 10°F–30°F Drain connection: ¾" MNPT threaded Moveable with casters Warranty: 5 years

Read more less

For hobbyists or smaller grow operations, the Anden Industrial Dehumidifier Model A70 is the perfect solution. Small, efficient and reliable, the A70 removes an impressive 70 pints per day of moisture from the air. Your crop’s quality is essential and the A70 was designed with healthy crops in mind. Trust the professional brand with solutions built specifically for indoor growing environments.  The Model A70 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control• Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module• Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820)• Control and monitor climate conditions in your grow room 24/7/365 from anywhere Optional Hanging Kit – DH35660 (Model 5660) Features: Control:  Front mount only Air discharge orientation: End of cabinet only Duct collars: 8" Backdraft damper: No Filter: ½" MERV 8 washable Refrigerant: R410A Coil type: Aluminum Power cord length: 8' Hardwire option: No Discharge air temperature rise: 10°F–30°F Drain connection: ¾" MNPT Threaded

Read more less

Anden Steam Humidifier w/Fan Pack and Digital Humidistat    The Anden model AS35FP is a high capacity electrode-type humidifier which runs independently of your HVAC system. The humidifier is capable of between 11.5 and 34.6 gallons per day, providing humidity to grow rooms up to 6,200 square feet. Running on cold water, the Anden AS35FP generates steam by energizing the two electrodes in the steam canister. Current flowing in between the electrodes causes the water to boil, creating steam. Steam is delivered into the grow/drying room via the Fan Pack. The modulating control will vary the Modulating Steam Humidifier’s output based on the difference between the set point and actual RH. When the RH set point is reached the humidifier stops producing steam and continues to energize the fan in the fan pack for 2 minutes to push any residual steam out into the grow/drying room.     The Anden AS35FP has many advanced safety and operational features:   Internal Control Board: Manages the complete operation of the humidifier. Fills and drains to maintain proper amperage draw, water level and notifies when service is required. Back Flow Protection : Air gap in the fill cap prevents pressure built up. Water Level Sensor : Manages the water level in the steam canister to prevent overfilling. Automatic Drain and Fill Cycle : Unit flushes and fills periodically to maintain the proper conductivity. Drain Water Tempering : Unit uses cold inlet water to temper the canister water reducing the drain water temperature below 140°F to protect PVC piping and condensation pumps. End-of-Season Drain : After a 72-hour period with no call for humidity the humidifier will drain the water from the canister. Unit will remain in stand-by until next call for humidification. Operating Time Monitor: Accumulates actual humidifier run time to activate periodic drain and fill cycles, end-of-season drain function and monitors the life of canister. A simple display panel provides the power switch for on/off operation and illuminated LEDs to show fill, drain, steam operations, and diagnostics. Maintenance is a breeze, no cleaning or scrubbing required. Simply remove the factory installed canister and replace.   Each unit delivers the necessary humidity needed during early growth cycles all the way through harvest. As a steam model, the AS35FP complements non-forced air heating sources and other specialty heating systems. It requires installation by a local HVAC professional.   19.49"W x 19.36"H x 30.07"D The Model AS35FP includes: The Steam Humidifier Fan Pack Model 5558 Control Model 4028 Drain trap assembly 6' steam hose 10' drain tubing

Read more less

The steam canister AS80 is the beating heart of your Anden humidifier, responsible for generating steam. Current runs between two electrodes within the canister, heating your water to a boil and creating steam that is distributed through the humidifiers fan pack. Made in Madison, Wisconsin, the AS80 Steam Canister is uniquely designed to fit the Anden model AS35FP Steam humidifier. Remember to replace it at the start of each heating season for optimal humidifier performance. Genuine Anden humidifier replacement part Made in Madison, WI, USA Generates steam for your humidifier Do not use RO water with Anden humidifiers

Read more less

The Model A76 Digital Dehumidifier Control communicates with your Anden dehumidifier, allowing you to control the operation of the unit from a distance. Using an onboard sensor, the Model A76 Dehumidifier Control monitors the relative humidity in the space in which it is located and displays the measured relative humidity on the digital display. This is a wired control unit that must be hardwired to your dehumidifier. The Model A76 digital control can also be used as a communicating remote control for your dehumidifier, allowing you to set the relative humidity level for your grow room and control your Anden dehumidifier from a convenient living or working space location. This makes it easy for you to control your Anden dehumidifier if it is located in an inconvenient or hard to access area.

Read more less

The Anden 4856 Dehumidifier Pump Accessory Kit provides a simple solution to empty excess water from the unit.  The Dehumidifier Pump Kit will provide a quick burst of pumping action when the water reaches a certain point in the pumps well area. The Pump Kit pumps the water up a hose and out to wherever you route the hose to. The Anden 4856 Dehumidifier Pump Kit Accessory includes a low profile condensate pump and a 20' drain tube.

Read more less

The 5660 hanging kit is designed for use with Anden models A70 & A95 industrial dehumidifiers with a total safe working load of up to 400 pounds. The rugged suspension bars are created from 14-gauge zinc plated steel and include 10' cables with cripple clamps and 3.5" bolts. Kit also includes: ¼" thick neoprene pads for vibration isolation, 4 washers, 4 hex nuts, and a gripple key for installation.

Read more less

Replacement MERV 11 Media Filter for model A200V1, A300V1 & A300V3. After initial installation, the MERV 11 air filter should be replaced every 6 months. Remove the filter access panel to remove and replace the filter. 6 Filters Per Carton

Read more less

Anden dehumidifiers are designed for maximum growth. The 5770 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5770 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. INCLUDES: (6) Replacement filters for ANDEN Dehumidifier Model: A85F DIMENSIONS: 12 x 12 x 1 MERV 11 Filter for Superior Equipment Protection  Upgraded protection from standard pleated filters High holding capacity Anden Dehumidifiers are designed with easy access for simple filter changes

Read more less

Anden dehumidifiers are designed for maximum growth. The 5771 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5771 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. INCLUDES: Replacement filter for ANDEN Dehumidifier Model: A95 DIMENSIONS: 10 x 12 x 1 MERV 11 Filter for Superior Equipment Protection  Upgraded protection from standard pleated filters  High holding capacity • Anden Dehumidifiers are designed with easy access for simple filter changes

Read more less

Anden dehumidifiers are designed for maximum growth. The 5772 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5772 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. INCLUDES: (6) Replacement filters for ANDEN Dehumidifier Model: A70 DIMENSIONS: 8 x 11-3/4 x 1 MERV 11 Filter for Superior Equipment Protection  Upgraded protection from standard pleated filters High holding capacity Anden Dehumidifiers are designed with easy access for simple filter changes

Read more less

Anden dehumidifiers are designed for maximum growth. The 5781 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5781 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. INCLUDES: (6) Replacement filters for ANDEN Dehumidifier Model: A210V1 DIMENSIONS: 14 x 18 x 2 MERV 11 Filter for Superior Equipment Protection  Upgraded protection from standard pleated filters High holding capacity Anden Dehumidifiers are designed with easy access for simple filter changes

Read more less

Anden dehumidifiers are designed for maximum growth. The 5813 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5813 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. INCLUDES: (6) Replacement filters for ANDEN Dehumidifier Model: A320V1, A320V3 DIMENSIONS: 20 x 22 x 2 MERV 11 Filter for Superior Equipment Protection  Upgraded protection from standard pleated filters High holding capacity Anden Dehumidifiers are designed with easy access for simple filter changes

Read more less

Anden Low Conductivity Steam Canister & O-ring   Product Details Anden Model AS80LC - Anden Low Conductivity Steam Canister & O-ringAnden Steam Humidifiers are a grow room solution that helps you achieve ideal conditions through humidity control. As water in the canister boils and turns into steam, minerals are left behind. Minerals remaining in solution increase the conductivity of the water. Minerals also deposit onto the submerged portions of the electrodes rendering those areas ineffective. As this occurs, the level of water in the canister rises to expose more uncoated electrode surface. Works with Anden Humidifier models AS35 and AS35FP  INCLUDES:  (1) Replacement canister  (1) New O-ring into groove in drain assembly. (part #5258). Dampen O-ring with water before inserting canister. Do not use oil, grease, or any lubricant besides water Anden Humidifiers are designed with easy access for simple canister changes The Model AS80LC canister is optimized for use in areas where the water conductivity is less than 300 uS/cm or when the Steam Humidifier is installed at 120VAC .  The Model AS80LC should not be used with softened water. If the Steam Humidifier is draining too frequently, the water conductivity is too high; changing to the Model AS80 canister will reduce the drain frequency

Read more less

The Anden Model 5558 Humidistat makes it easy to check relative humidity levels in each grow area. This precision digital humidistat is designed specifically for the Anden steam humidifier. Selectable Celsius or Fahrenheit scale Outputs controlling humidification and dehumidification Integrated sensor for better application flexibility  Multi-level lockable access menu and lockable set point to prevent accidental changes

Read more less

Anden Industrial Dehumidifier, 710 Pints/Day, 208-240v   Product Details The Anden DHA710V1 is indoor agriculture’s first ever variable speed dehumidifier designed from the ground up for indoor cultivation. Our dedicated team of refrigeration engineers have developed a patent pending variable speed technology that delivers unprecedented environmental control specifically designed for the challenges of indoor cultivation. By tightly and smoothly controlling environmental conditions, both yields and overall plant quality can be greatly enhanced-leading to higher profits for the cultivator. The Anden 710 utilizes innovative patent pending variable speed technology (VLGR) to deliver high performance and efficiency throughout the grow cycle. The 710 removes more moisture across all grow conditions than any other dehumidifier on the market today. Designed from the ground up for indoor cultivation, the Anden 710 with VLGR technology allows operators to maximize moisture removal and the ability to achieve difficult VPD targets during late flower by modulating the refrigeration system to match the load.  VLGR TECHNOLOGY delivers the smoothest environmental control and strongest VPD performance by utilizing a proprietary variable speed refrigeration system. From a $/pint perspective, the Anden 710 with VLGR delivers the best return on investment when compared to competitive dehumidifiers. VLGR technology allows the Anden 710 to maximize water removal while utilizing less amps. The 710 pulls 200 more pints per day on a 30 amp circuit than any other unit on the market.

Read more less

Anden Industrial Dehumidifier, 710 Pints/Day, 277V   Product Details The Anden DHA710V3 is indoor agriculture’s first ever variable speed dehumidifier designed from the ground up for indoor cultivation. Our dedicated team of refrigeration engineers have developed a patent pending variable speed technology that delivers unprecedented environmental control specifically designed for the challenges of indoor cultivation. By tightly and smoothly controlling environmental conditions, both yields and overall plant quality can be greatly enhanced-leading to higher profits for the cultivator. The Anden 710 utilizes innovative patent pending variable speed technology (VLGR) to deliver high performance and efficiency throughout the grow cycle. The 710 removes more moisture across all grow conditions than any other dehumidifier on the market today. Designed from the ground up for indoor cultivation, the Anden 710 with VLGR technology allows operators to maximize moisture removal and the ability to achieve difficult VPD targets during late flower by modulating the refrigeration system to match the load.  VLGR TECHNOLOGY delivers the smoothest environmental control and strongest VPD performance by utilizing a proprietary variable speed refrigeration system. From a $/pint perspective, the Anden 710 with VLGR delivers the best return on investment when compared to competitive dehumidifiers. VLGR technology allows the Anden 710 to maximize water removal while utilizing less amps. The 710 pulls 200 more pints per day on a 30 amp circuit than any other unit on the market.

Read more less

Anden A710V1 & A710V3 MERV 11 Replacement Filter   Product Details Anden 5852 MERV 11 Replacement Filter for A710V1 & A710V3 Dehumidifiers Anden dehumidifiers are designed for maximum growth. The 5852 Multi-Pleat MERV 11 filter is designed to maintain the efficiency and performance of your Anden dehumidifier and maintain the quality of air by removing a higher percentage of particles and contaminants. This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. MERV 11 Filter for Superior Equipment Protection High holding capacity Anden Dehumidifiers are designed with easy access for simple filter changes INCLUDES: Replacement filters are packaged 6 per case for Anden Dehumidifier Model: A710V1 & A710V3 DIMENSIONS: 29.5"x 31.5"x 1.75"

Read more less

Anden 5859 Duct Kit for A710V1 & A710V3 Dehumidifiers   Product Details Anden 5859 Duct Kit for A710V1 & A710V3 Dehumidifiers Anden dehumidifiers are designed for maximum growth. The model 5859 duct kit is for applications where ducting your dehumidifier is required. This dehumidifier can be installed outside of the grow room and ducted to the room with dedicated inlet and supply ducts.The model 5859 duct kit for the A710V1/V3 has 24” round openings on the inlet and outlet sides. Duct Kit Includes:  Duct transitions for the inlet and outlet. The inlet transition comes with a filter access door for ANDEN Dehumidifier Model: A710V1 & A710V3 Material:  Galvanized steel Duct Collar Size:  24” round

Read more less

Anden dehumidifiers are designed for maximum growth. The 5701 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5701 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. INCLUDES: (6) Replacement filters for ANDEN Dehumidifier Model: A130 DIMENSIONS: 14 x 19 x 1 MERV 11 Filter for Superior Equipment Protection  Upgraded protection from standard pleated filters High holding capacity Anden Dehumidifiers are designed with easy access for simple filter changes

Read more less

Anden dehumidifiers are designed for maximum growth. The 5769 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5769 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. INCLUDES: (6) Replacement filters for ANDEN Dehumidifier Model: A130F DIMENSIONS: 16 x 19 x 1 MERV 11 Filter for Superior Equipment Protection  Upgraded protection from standard pleated filters High holding capacity Anden Dehumidifiers are designed with easy access for simple filter change

Read more less

The 5691 hanging kit is designed for use with Anden model A130 industrial dehumidifiers with a total safe working load of up to 400 pounds. The rugged suspension bars are created from 14-gauge zinc plated steel and include 10-foot cables with cripple clamps and 3.5" bolts. Kit also includes: ¼" thick neoprene pads for vibration isolation, 4 washers, 4 hex nuts, and a gripple key for installation.

Read more less

 210 Pints Per Day. Anden A210V1 Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth potential. Better. Removes up to 3 liters per kilowatt hour, for maximum energy efficiency.Faster. Quickest commercial dehumidifier to reach peak power for maximum moisture removal.Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics.   Anden advanced features: Positive pressure drain allows proper drainage without the need for a drain trap, providing for trouble free operation Self-sealing air filter for efficient protection of components; with easy access for replacement Included hanging kit doubles as lifting handles, provides easy, flexible installation Pre-installed electrical plug is easily removable for hard wired application, providing flexible installations Float switch terminals for easy set-up 76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor   Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.   210V1 SPECS: Capacity: 210 PPD Energy Factor: 3.0 L/kWh / 6.3 pints/kWh Voltage: 208–240VAC, 1 Phase, 60 Hz BTU: 2,036 Current draw (amps)(1): 7.15 Power (watts)(1): 1,487 Weight: 118 lbs. Width: 19½" - Height: 18¾" - Length: 30⅛" Warranty: 5 Years on all parts   INCLUDED ITEMS: Dehumidifier Filter Leveling Feet Hanging Brackets A76 Control Drain Fitting Drain Tubing Thermostat wire Screw driver

Read more less