Products
-
4" Tri-Clamp x (2) 1/4" FNPT w/ Showerhead
4" Tri-Clamp/ Tri Cover x (2) 1/4" FNPT w/ Showerhead These End Caps come with Two 1/4"-18 FNPT Threaded connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid. Shower Head End Caps help disperse solvent input into a system which creates better material saturation when flooding a material column. This helps to prevent channeling, ensuring all the material is saturated. Specifications Material: 304 Stainless Steel Connection Type: Tri-Clamp 1/4" - 18 FNPT Standard: 3A Sizes Available: 4"
$55.29 $41.46
-
4" Vacuum Chamber Digital Heat Pad
4" Vacuum Chamber Digital Heat Pad Please Read Before You Buy! Chamber NOT Included, Sold Separately. Heat Pad must fit correct size of the chamber! Fits a 2QT chamber, and a Mini Extractor Base This Digital Heat Pad will adhere to the bottom of a chamber vessel with a peel and stick backing. This unit will hold a temperature within a degree to the set temperature (dependent on the environment and air movement). The temperature offset must be found to set the controller accurately. (See ‘Operation’ instructions in the operation manual) Included with this Digital Heat Pad: Instructions on how to operate and set parameters. Simple standoff bumpers (provide thermal separation between the vessel and the work surface) Thermal tape (best method to check and verify temperature) Specs: UL Listed Fahrenheit Digital Controller. Min Temp: Ambient + 5 Max Set Temp: 160°F Ultimate Max Temp: 248°F Voltage: 110VAC Only Power Consumption: 220-watt Digital Control: Increments of 1 Degree. Accuracy: +/- 0.2 Degrees Units: Degrees Fahrenheit Instructions: Fully included Relay Lifespan: Approx. 10 million cycles User can reprogram: Yes
$103.66
-
4" x 1.5" x1/4" FNPT Tri-Clamp Endcap
4" x 1.5" x1/4" FNPT Tri-Clamp Tri Clover Endcap This End Caps come with a 1/4"-18 FNPT Threaded connection and 1.5" Tri-Clamp ferrule welded to the end cap with a sanitary weld. They allow the user to adapt and connect a threaded connection to the 1/4" port on a Tri-Clamp lid and the 1.5" Tri-Clamp Connection. These 2 connections are welded on a 4" Tri-Clamp End Cap. Specification Material: 304 Stainless Steel Connection Types: 1.5" Tri-Clamp - 3" Tube Extension Below Lid on Center Tri-Clamp Port 4" Tri-Clamp 1/4" - 18 FNPT Standard: 3A BVV™ 4" x 1.5" x1/4" FNPT Tri-Clamp Endcap - Drawing BVV™ 4" x 1.5" x1/4" FNPT Tri-Clamp Endcap - End Cap Chart
$138.22
-
The Press Club 4" x 12" ROSIN BAGS
ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$48.31 - $1,382.09
-
4" x 24" Dry Ice Heat Exchanger
This 304 stainless steel heat exchanger is used as a condenser for your extractor setup. It has a sleeve around the heat exchanging tubes and a wide opening at the top to allow users to pour in dry ice to super chill the exchanger. For best results, use dry ice mixed with ethanol to get the most possible contact across the surface area of the tubes. The bottom of the sleeve has a 1/4" NPT drain plug that can be removed to drain ethanol. Connection flanges on top and bottom are 4" Tri-Clamp. We offer a pre built stand alone version that comes with hemispherical caps and JIC connections, but we will be happy to help you configure it any way that you want!
$1,727.69
-
The Press Club 4" x 7" ROSIN BAGS
ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$41.40 - $1,382.09
-
North Spore 4-pack 'ShroomTek' + Spore Boostr All-in-One Mushroom Grow Bag
Grow dung-loving mushrooms right in the bag! Our beginner-friendly ShroomTek All-In-One Mushroom Grow Bag + Spore Boostr was formulated by mycologists to simplify mushroom growing while maximizing the speed and size of your grow. (All that's required is a spore syringe or liquid culture!) The entire grow takes place inside the bag – from inoculation to colonization to flush – making the entire process both seamless and effortless. Speed up your grow with Spore Boostr! Each ShroomTek includes Spore Boostr (5 ml), a nutrient-rich broth that turns slow-growing spores into fast-growing liquid culture. Simply inject your spores into Spore Booster before inoculating your ShroomTek bag and allow them to germinate. After 1-2 weeks, when you see visible mycelium, it’s time to inject! As easy as inject, grow, harvest ShroomTek contains a proprietary blend of sterilized, nutrient-rich, organic manure-based compost, organic grain, coco coir, and several quality substrate supplements (although we keep the exact blend a secret!) Each bag is optimally hydrated for substrate mix and volume to ensure a healthy, well-hydrated environment for optimal mycelial growth. Bags also include a self-healing injection port for use with a spore or culture syringe plus a 5 micron filter patch to block airborne contaminants while providing even gas exchange. Once inoculated, you can expect your first flush within 30-60 days (depending on species and strain.) Note: Color of injection port may vary. ⮕ The complete Shroomtek method Sterile and ready to use Bags are sterilized in a commercial-grade steam autoclave, and sterility is verified using biological indicators and temperature sensors. (Condensation around the injection port may occur, and will not negatively impact the product or its performance.) Inoculation ratio We recommend using 2.5-5ccs of your favorite spore syringe or liquid culture syringe. (Higher inoculation rates may improve colonization times and mitigate contamination.) More ways to grow Although the ShroomTek All-In-One Mushroom Grow Bag is designed as a self-contained growing chamber, it can be used in conjunction with other growing chambers such as a monotub or BoomRoom martha tent, should you want fuller control over environmental conditions. ⚠️ IMPORTANT: Spore syringe vs. liquid culture syringe Shroomtek works with both spore syringes and liquid culture syringes. However, spore syringe users will not see growth for an additional 1-3 weeks during the germination process without the use of Spore Boostr. This is because liquid culture syringes contain live mycelium whereas spore syringes contain fungal spores that need to become mycelium. ⚠️ IMPORTANT: If you choose to use spore syringe without Spore Boostr DO NOT shake the bag immediately after inoculation. Doing this may prevent the fungal spores from germinating.
$165.80 $138.20
-
4.8CF CSA Certified Lab Grade Forced Air Convection Drying Oven – 12 Shelves Standard
4.8CF BVV™ CSA Certified Lab Grade Forced Air Convection Drying Oven – 12 Shelves Standard DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in WELL VENTILATED AREAS! The 4.8CF CSA Certified Laboratory Grade Drying Oven is our newest addition to the Best Value Vacs line of Laboratory-grade processing equipment. Offering a leading ±1⁰F temperature stability, over 98% heat uniformity, and no overshoot, technicians can now process material with ease and confidence. We regulate heat using a modern, high-precision PID controller with a large, bright display and touchscreen buttons. The interior is a high-polish stainless steel, presenting a clean and easy to maintain surface. Our drying oven comes fully-stocked as a standard- offering ten spacious, wire frame shelves you can easily insert, remove, and clean. With a clear, no-overshoot advantage, there’s simply no better choice for your precision processing needs. Key Oven Features: Long-lifetime convection fan gently circulates air for optimal heat distribution Stainless steel interior for a sanitary, easy-to-clean look 12 spacious, wire racks are easy to insert and remove Level-adjusting caster wheels for mobility and stability Overload circuit breaker for electrical protection Large, tough, stainless steel door handle feels solid and works great Temperature overshoot protection enabled Digital timer allows users precise control of heating cycle Simple and powerful user interface presented in a large, bright, clear display Specifications Electrical 120 VAC / 60Hz / 2050W / USA Plug Internal Chamber Material: Polished Stainless Steel Dimensions (LxWxH): 21.65" x 17.72" x 21.65" Temperature Control LED PID Controller Temperature Range: RT+18F - 572F Temperature Stability: +/- 1F Temp Resolution: +/-0.1F Heat Uniformity: 98% Shelves Up to 12 Removeable Shelves Door Dual Layer Observation Window made from Tempered Glass Replaceable Gasket Material: Silicone Weight & Dimensions Outside Dimensions (LxWxH): 33.07" x 22.83" x 28.74" Weight: 149.91lbs Compliance CSA Certified *ISO 9001:2005 Note: This item is a freight ship item and will ship Via UPS Ground Freight. Expedited freight can only be calculated by calling customer service 331-281-0154. All orders with expedited freight through the website will not be honored and will need to be re-quoted. A valid Phone Number IS REQUIRED to ship, Otherwise UPS freight Cannot Contact you for a delivery setup window.
$3,455.39 $2,764.31
-
The Press Club 44 GALLON ALL MESH BUBBLE WASH BAGS 1-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 44 Gallon Buckets Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack All-Mesh (Pick From All Available Microns) 4-Pack All-Mesh (Pick Any 4) 8-Pack All-Mesh (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$124.32
-
The Press Club 44 GALLON ALL MESH BUBBLE WASH BAGS 8-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 44 Gallon Buckets Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack All-Mesh (Pick From All Available Microns) 4-Pack All-Mesh (Pick Any 4) 8-Pack All-Mesh (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$552.79
-
The Press Club 44 GALLON ALL MESH BUBBLE WASH BAGS PICK ANY 4-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 44 Gallon Buckets Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack All Mesh (Pick From All Available Microns) 4-Pack (Pick Any 4) 8-Pack All Mesh (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$345.47
-
Boldtbags 44 Gallon Boldtbags Full Mesh Stacker Lock-Top w/ Belt Lock
44 Gallon Boldtbags Full Mesh Stacker Lock-Top w/ Belt Lock Lock top bags are the new product made with you in mind. Adjust your bag to the height you need and lock it in for easier product washing and collection. Custom designed with Full Mesh, these bags provide exceptional ice water sieving properties and award winning purity thanks to the large functional surface area and lightweight construction that allows for easy use and award winning results. Ideal purchase for Laboratories. Have a variety of bags to choose from and mix and match for perfect trichlome extraction. Diameter 23.5″ Depth 28.25″ 4 bag kit includes: 190 micron bag (green) 160 micron bag (red) 90 micron bag (black) 45 micron bag (white) Additional belt lock Scraping card 8 bag kit includes: 220 micron bag (blue) 190 micron bag (green) 160 micron bag (red) 120 micron bag (orange) 90 micron bag (black) 73 micron bag (yellow) 45 micron bag (white) 25 micron bag (purple) Additional belt lock Scraping card
$552.86 $345.54
-
45G Mini Top Fill Closed Loop Extractor
***Note: Butane(Solvent) not included with systems unless ordered with dropdown menu or separately. Any order with butane WILL NOT SHIP EXPEDITED. ***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors Closed Loop Reclamation Extraction System (Comes with 1 yr. Limited warranty) 45G Mini Top Fill Closed Loop Extractor (System comes with 1 yr. limited warranty) What’s a 45G Mini Top Fill Closed Loop Extractor? 45G Mini Top Fill Closed Loop Extractor is an excellent extraction system for small personal test runs. Since it’s a smaller version of our standard top-fill closed loop extractor, it’s great for beginners while still maintaining all the bells and whistles. Our extractor is even the perfect size for a tabletop! How Does the 45G Mini Top Fill Closed Loop Extractor Work? The top-fill closed loop extractor is the safest way to do hydrocarbon extraction. First, solvent washes through the material column and collects oils as it passes over the material. Then, the oil-bearing solvent is collected in the collection base. Once collected, the solvent in this passive unit is distilled and recovered using temperature manipulation. This is what leaves oils behind in the collection base. What’s Included in the 45G Mini Top Fill Closed Loop Extractor? High-Pressure PTFE Braided Stainless Steel Hose Standard Pressure Tri-Clamps Full set of BUNA-N gaskets Includes 100 Mesh (150 Micron) gasket for the material tube Can Tap Tool Instruction Manual 1 Year Limited Warranty and Customer Service 45G Mini Top Fill Closed Loop Extractor System Specifications 1.5"x 6" 304 Stainless Steel Material Tube 304 Stainless Steel Heavy Duty Miniature Ball Valves System Rated to 100PSI Multiple port connections for any 316 Stainless SAE 37 Degree 304 Stainless Steel Base Container 4" diameter by 4" tall Tri-Clamps at all interfaces for high pressure, easy-clean unit High-Quality BUNA-N Gaskets designed for oil processing Operating Temperature Range: -40°F to 160°F Ultimate Vacuum: as low as 10 Microns Designed to run a single can of solvent and reclaim it (420ml) 540 ml max FILL! Construction: All major components made of 304 Stainless Steel Max Vacuum -29.9inHg High Polish Interior Mini CLS / Mini XL Upgrades Explorer Our most standard and economical setup. It’s perfect for entry-level extractors on a budget. It comes with a welded bottom base and stainless reclaim container. This model has minimal features to keep costs low while providing the necessary equipment to get the job done. Includes: Standard Valves Welded Bottom Base Professional This model features upgrades for easier extraction. An inline ball valve allows the solvent to be suspended in the material column and closes the collection base during recovery. The removable bottom to the collection base makes extract removal simple. Includes: Standard Valves Ball Valve Splatter Platter Base Notes and Disclaimer(s): Please note: The solvent Butane isn’t included with any of our systems unless ordered separately or by using the dropdown menu. Orders containing butane won’t ship expedited. Also, column capacity may vary. Capacity is calculated using the industry standard of 4.2g/in3 as the upper limit. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend tightly packing coarse ground material. Shop all Closed-Loop Extractors Disclaimers: This unit is intended for legal purposes only while following local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors. Explorer Professional Standard Valves Welded Bottom Base Standard Valves Ball Valve Splatter Platter Base System Specifications: 1.5"x 6" 304 Stainless Steel Material Tube 304 Stainless Steel Heavy Duty Miniature Ball Valves System Rated to 100PSI Multiple port connections for _" 316 Stainless SAE 37 Degree 304 Stainless Steel Base Container 4" diameter by 4" tall Tri-Clamps at all interfaces make for a high pressure, easy-clean unit. High-Quality BUNA-N Gaskets are designed for Oil Processing Operating Temperature Range: -40F to 160F Ultimate Vacuum: as low as 10 Microns Designed to run a single can of solvent and reclaim it (350ml) Max FILL!! Construction: All major components made of 304 Stainless Steel. Max Vacuum -29.9inHg High Polish Interior What's Included: High-Pressure PTFE Braided Stainless Steel HoseStandard Pressure Tri-Clamps Full set of BUNA-N gaskets including the 100 Mesh(150 Micron) gasket for the material tube is included Can Tap Tool Instruction Manual 1 Year Limited Warranty and Customer Service *Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material. Material Capacity Cylinder Volume Radius (in) 1.5" 2" 3" 4" 6" 8" 10" 12" Length (in) Volume (in3) Select Material Butane ISO-Butane Propane How Much Will Fit in Cylinder FormulaVolume x Weight of Water x Specific Gravity ConstantsWeight of Water = 0.0360 (lbs / in3)Specific Gravity of = Lbs. of : Recommended: Account for an 80% fill to avoid a hydraulic lock How Much Material Will Fit in the Cylinder Volume Packing Density (g) 2.5 3 3.5 4.3 Grams of Material Lbs. of Material Cans of Butane Cans of Butane by Size Pounds of Butane mL fl oz lbs # of Cans 420 14.2 300 10.1 200 6.7 150 5.07
$656.52 - $883.20
-
45L Centrifuge Bags
This nylon bag is designed to fit in our BVV brand centrifuges to contain material and be easily swappable after runs to speed up processing times. These bags come with 2 zippers and come in 1, 10, 50, 100, and 200 micron filtration levels. For use with 45L Centrifuges Appx. Size : 17.5" Diameter x 11.75" Height Specifications SKU Appx. Diameter In. Appx. Height in. CFB-45L-XXX 17.5" 11.75" CFB-160L-XXX 32.25" 13" CFB-280L-XXX 39.25" 14" CFB-475L-XXX 47.25" 16.75"
$158.95 - $413.26
-
475L Centrifuge Bags
This nylon bag is designed to fit in our BVV brand centrifuges to contain material and be easily swappable after runs to speed up processing times. These bags come with 2 zippers and come in 1, 10, 50, 100, and 200 micron filtration levels. For use with 475L Centrifuges Appx. Size : 47.25" Diameter x 16.75" Height Specifications SKU Appx. Diameter In. Appx. Height in. CFB-45L-XXX 17.5" 11.75" CFB-160L-XXX 32.25" 13" CFB-280L-XXX 39.25" 14" CFB-475L-XXX 47.25" 16.75"
$338.63 - $689.70
-
Fisher American 4′ Fisher American Fume
4′ Fisher American Fume sku Fume Hood Exterior Dimensions: Work Area (Interior) Dimensions: Fume Hood Accessories: Width: Depth: Height: Width: Depth: Height: NLS- 401 48″ 31.5″ 54.5″ 38″ 23″ 46″ 1 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 Flammable Storage NLS- 403 48″ 31 1/2″ 54.5″ and 89.5″ with cabinet 38″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 General Storage NLS- 404 48″ 31.5″ 54.5″ (89.5″ with acid cabinet) 38″ 23″ 46″ 1 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 ACID Storage NLS- 405 48″ 31 1/2″ 54 1/2″ and 89 1/2″ with cabinet 38″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 General Storage NLS- 406 48″ 31 1/2″ 54 1/2″ and 89 1/2″ with acid cabinet 38″ 23″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 ACID Storage NLS- 407 48″ 31.5″ 54.5″ and 89.5″ with cabinet 38″ 23″ 46″ 1 Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows 1 Flammable Storage NLS-408 48″ 31″ 89″ 39″ 23″ 81″ Door opening: 39″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 2 Vertical Sliding doors. NLS-409 48″ 48″ 89″ 39″ 39″ 81″ Door opening: 39″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 2 Vertical Sliding doors. NLS-416 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 General Storage NLS-417 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 ACID Storage NLS-419 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 General Storage NLS-420 48″ 48″ 54 1/2″ and 89 1/2″ with cabinet 38″ 39″ 46″ Light on/off Switch 1 AC Power Plug 1 Cold Water Valve 1 Gas Valve 1 Vertical Sliding Sash Door with 2 horizontal sliding glass windows. 1 ACID Storage
$10,953.59 - $19,972.15
-
The Press Club 5 GALLON ALL MESH BUBBLE WASH BAGS 1-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 5 Gallon Buckets Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack All-Mesh (Pick From All Available Microns) 4-Pack All-Mesh (Pick Any 4) 8-Pack All-Mesh (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$55.22
-
The Press Club 5 GALLON ALL MESH BUBBLE WASH BAGS 8-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 5 Gallon Buckets Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack All-Mesh (Pick From All Available Microns) 4-Pack All-Mesh (Pick Any 4) 8-Pack All-Mesh (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$345.47
-
The Press Club 5 GALLON ALL MESH BUBBLE WASH BAGS PICK ANY 4-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 5 Gallon Buckets Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack All Mesh (Pick From All Available Microns) 4-Pack (Pick Any 4) 8-Pack All Mesh (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$207.25
-
5 Gallon Aluminum - POT ONLY
5 Gallon Aluminum - POT ONLY This is a replacement part for the following Vacuum Chambers: Best Value Vacs 5 Gallon Aluminum Vacuum and Degassing Chamber SVac 5 Gallon Aluminum Vacuum Chamber Dimensions: 10" Tall x 12" Diameter Material: 3004 Aluminum
$82.93
-
5 Gallon Aluminum SIDEMOUNT - POT ONLY
5 Gallon Aluminum SIDEMOUNT - POT ONLY ***Note: 'with Hardware' Option only includes the side-mount manifold with gauge pre-installed. (Does Not Include Lid or Gasket) This is a replacement part for the following Vacuum Chambers: Best Value Vacs 5 Gallon Aluminum Side Mount Vacuum and Degassing Chamber Glass Vac 5 Gallon Aluminum Vacuum Chamber Dimensions: 10" Tall x 12" Diameter Hole Size: 21/64 Material: 3004 Aluminum
$88.46 - $116.10
-
The Press Club 5 GALLON CANVAS BUBBLE BAGS 1-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 5 Gallon Buckets 2.25" Filter Sidewall For Quick Draining Heavy Duty Double-Sided Grommets For Hang Drying Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack (Pick From All Available Microns) 4-Pack (Includes 220 Micron, 160 Micron, 75 Micron and 25 Micron) 8-Pack (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$55.22
-
The Press Club 5 GALLON CANVAS BUBBLE BAGS 8-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 5 Gallon Buckets 2.25" Filter Sidewall For Quick Draining Heavy Duty Double-Sided Grommets For Hang Drying Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack (Pick From All Available Microns) 4-Pack (Includes 220 Micron, 160 Micron, 75 Micron and 25 Micron) 8-Pack (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$345.47
-
The Press Club 5 GALLON CANVAS BUBBLE BAGS PICK ANY 4-PACK
THE PRESS CLUB IS THE ONLY WASH BAGS OFFICIALLY ENDORSED & RECOMMENDED BY @BCBUBBLEMAN. READ THE FULL ANNOUNCEMENT HERE. ------------------------------------------------------------------- NEW TO WASHING? Read WHAT IS BUBBLE HASH?, HOW TO WASH BUBBLE HASH and HOW TO PRESS BUBBLE HASH ROSIN STARTER GUIDE The Press Club Wash Bags are the last set of bubble wash bags you'll ever own! Made from premium, food-grade material specifically for washing you can stop second guessing whether you have the right or best bags in the industry. All our bubble wash bags are hand sewn with our proprietary pink stitching, making them 2x stronger than competitors. You can be confident our bags will perform the same no matter if it's your 1st or 1000th wash. We're so confident our bubble wash bags will stand the test of time, every bag comes with a Lifetime Warranty. If you have any manufacturer issues, we'll be more than happy to replace the bag for you! KEY FEATURES Fits All Standard 5 Gallon Buckets 2.25" Filter Sidewall For Quick Draining Heavy Duty Double-Sided Grommets For Hang Drying Hand Sewn With Our Proprietary Pink Stitch w/ Food-Grade Materials Military-Grade Waterproof & No Flaking Bag Liner Premium Drawstring & Cord Locks To Secure Bags Lifetime Warranty On All Wash Bags Includes Meshed Carrying Case For 2-Way Drying & Storage Made In USA AVAILABLE MICRONS 220 Micron (Work Bag), 190 Micron, 160 Micron, 120 Micron, 90 Micron, 73 Micron, 45 Micron, 25 Micron AVAILABLE PACKS 1-Pack (Pick From All Available Microns) 4-Pack (Includes 220 Micron, 160 Micron, 75 Micron and 25 Micron) 8-Pack (Includes All Available Microns) DRYING SCREENS SOLD SEPARATELY ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Magnets, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 4" x 7", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon All-Mesh, 20 Gallon All-Mesh, 32 Gallon All-Mesh, 44 Gallon All-Mesh (Work Bag Only) XL DRYING SCREENS: 12" x 12" (15 Micron) PARCHMENT PAPER: 5" x 5", 6" x 12", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars ACCESSORIES: Rosin Bag Dispenser, ISO Station, Terp Pearls, Stickers, T-Shirt
$207.25
-
5 Gallon Refinement Filter
The BVV™ 5 Gallon Refinement Filter is a stainless steel filtration system that provides large scale, high flow filtering, with greatly improved functionality compared to a traditional Buchner filter. Utilizing a collection base for vacuum assistance and storage of material, the Refinement Filter allows for benchtop filtration with a longer lifespan and ease of use. Key Features: Stainless steel design for greater thermal conductivity and improved lifespan Easy to clean and disassemble with Tri-Clamp stainless steel parts Small tabletop footprint with wide mouth design Secondary collection vessel for vacuum and storage of material Liquid dip tube for direct injection into rotary evaporator after filling Key Specifications: Large 6" Diameter x 12" Long Dewaxing Column 20 Liter Collection Base 5 micron Sintered Stainless Steel Filter Disc 100 Pack of 6" Ashless Filter Paper (BIO-1-180) Dedicated 3/8" Vacuum Valve Dedicated 3/8" Dip Tube Valve Silicone gaskets with high alcohol resistance 3/8" Stainless steel hose barb connections Polycarbonate sights for easy viewing 2" Tri-Clamp Short Sight Glass for Flow Viewing Operation Instructions: Before beginning filtration, place refinement filter in freezer for best thermal conductivity Secure ashless filter paper with filter plate ring Place collection base on floor and connect tubing from refinement filter to to a vacuum pump Attach vacuum system to the dedicated vacuum valve Begin to pour solution into filter Close dedicated dip tube valve and start vacuum Once solution has been completely filtered, stop vacuum system and disconnect from dedicated vacuum valve Connect dedicated dip tube valve to injection valve on rotovap Begin rotovap procedure Open dedicated dip tube valve and begin injecting filtered solution into rotovap
$2,529.35
-
5 Gallon Resin Trap Vacuum Chamber
Resin Trap Vacuum Chamber Designed, built, and 100% tested in Chicago, Illinois, the Resin Trap Vacuum Chamber is the perfect application for a successful, high-quality end product. With its unique, patent pending gasket design (Utility Patent #14/533,548), this shatter chamber can easily withstand 10,000 uses with proper care and maintenance. The gasket itself is reversible, doubling the system's life by allowing customers to instantly take it off and flip it over. No adhesives necessary—this is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The individual components of this chamber are rated at higher temperatures, however, as a vacuum vessel, we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5 in Hg/24hrs. Key Features: Comes with 2 year limited warranty Resin traps come complete with glycerin-filled vacuum gauge, fittings for use with 1/4" vacuum tubing, nickel plated brass ball valve and instruction manual. Capture excess resin and protect your pump! Unique Catch Port Design: An additional hose can be installed at the port inside the tank to facilitate accurate collection of resin. 5 Feet Reinforced Vacuum Hosing to Connect Directly to the Vacuum Pump 1/4" SAE port. Measuring range of vacuum gauge：0-29.25inHg Silicone gasket to be used over 10,000 times without deterioration. This Kit Includes: (1) 5 Gallon Aluminum Chamber (1) Industrial grade silicone gasket Gasket can withstand 390F max temp. 60A durometer density (1) Glycerin filled vacuum gauge (must be regulated upon arrival) Max vacuum -29Hg (+/-.5Hg) at sea level (1) Leak free nickel plated 1/4" Hvac Flare Valve (1) ¼” Barbed Connection (1) 5' Purple BVV™ Hvac Hose (1) 5' Clear Vacuum Tubing Internal Dimensions: 10" Tall x 12" Diameter Compatibility Explanation BestValueVac® Chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water. ShatterVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents. GlassVac® chambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac® chambers for resin infusion and wood stabilization. The lid may be cleaned with any solvent or cleaning agent. Pump Facts: We recommend the oil is changed every 50-75 of operating hours. CFM is a measure of cubic feet per minute. Single stage pumps reach a max vacuum of 50-75 microns (0=complete vacuum). Dual/Two stage pumps reach a max vacuum of 10-15 microns (0=complete vacuum). For shipping info including Import/Export details visit our Shipping page.
$228.06
-
5 Gallon Vacuum Chamber Digital Heating Jacket
5 Gallon Vacuum Chamber Digital Heating Jacket A vacuum chamber heating jacket provides the user the ability to evenly heat the chamber around the circumference while being very stable and when combined with a heating pad it covers most of the vessel distributing heat on what is being degassed in the vessel. Key Features: Velcro Connections on each end. Digital PID Temperature Controller for accurate and stable control. Made of heat resistant silicone. Specifications: Min Temp: Ambient +5F Max Set Temp: 248F Ultimate Max Temp: 248F Voltage: 110VAC Only Precision: 1 degree F increments. Stability: +/- 0.2 F Dimensions: Approx. 9.8"W x 40"L Instructions Included Relay Lifespan 10million Cycles Reprogrammable: Yes This product comes with the Digital Heating Jacket ONLY, does not include the chamber.
$421.56
-
North Spore 5 Micron Filter Patch Unicorn 3B Mushroom Grow Bags
These autoclavable mushroom grow bags are our go-to for indoor mushroom cultivation and spawn production. Bags are made of 2.2 ml thick polypropylene plastic and are designed to withstand high temperatures. The 5 micron filter also allows for ample gas exchange. These bags are durable and clear enough to make monitoring growth easy and can be sealed with an impulse sealer, or just be tied to the seal.
$13.81 - $732.53
-
SSP Corporation 5 Pack Back Ferrule
SSP - 5 Pack Back Ferrule SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations. Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) = Tube Rating SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$4.15 - $5.53
-
SSP Corporation 5 Pack Front Ferrule
SSP - 5 Pack Front Ferrule SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations. Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) = Tubing Rating SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$4.15 - $5.53
-
5 Pack of Metal Keck Clips for 24/40 Joints
5 Pack of Metal Keck Clips for 24/40 Joints 5 Pack of Metal Keck Clips for 24/40 joints. Universal clips for ground joints manufactured from high-grade stainless steel. These clips fit snugly and are not overly difficult to slide on and off.
$15.20
-
5 Pack of Plastic Keck Clips for 24/40 Joints
5 Pack of Plastic Keck Clips for 24/40 Joints 5 Pack of Plastic Keck Clips for 24/40 joints.
$16.59
-
SSP Corporation 5 Pack Tube Fitting Nuts 1/4" Fitting
SSP - 5 Pack Tube Fitting Nuts SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations. Specifications Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating Connection Size 1/4 Inch Height 1/4 Inch Width 1/2 Inch Hex Size 9/16 Inch SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$8.29 $4.15
-
5 Ton Low Temp Glycol Chiller
Discover the Cold Shot Chillers® advantage. Crafted for reliability and user-friendly operation, These portable air-cooled chillers are proudly manufactured in the USA, utilizing proven components and backed by round-the-clock support from a network of technicians in the US. Engineered for a lifetime of service, these chillers ensure precise temperature control. Robust compressors paired with a generous reservoir deliver impressive cooling capacities, keeping your operations smooth even during the hottest months. Choose Cold Shot Chillers® for a reliable, long-lasting cooling solution. Key Features: Integrated Controls: PLC controlled with self-diagnostics. WIFI/LAN/LTE connectivity for predictive maintenance through Guardian™ app. Email/text notifications for predictive maintenance milestones, technical alarms, fault codes, and alerts. Quality Construction: Copeland Scroll technology for efficiency. Stainless Steel/Copper Braze Plate for durability. External Brass Service Valves for easy maintenance. Large Copper Condensing Coil with Aluminum Fins or Micro Channel for effective cooling. Powder-Coated, Heavy-Gauge Steel Cabinet for rugged protection. Additional Specifications: Rugged Stainless Steel Centrifugal Pumps for high flow and dependability. Oversized Magnetic Contactors for longevity. Lifetime Warranty for peace of mind. Benefits: Long Life – Dependable – Economical to Operate. Compact Efficiency for space-saving installations. Easy Maintenance and Repair for user-friendly operation. Rugged Protection while allowing for easy maintenance and wash down. High Flow – Long Life – Dependable performance. Rugged Dependability with a Lifetime Warranty. Specifications: 5 tons (60,000 BTU/17.5KW) 25 Gallon Stainless Steel Reservoir Tank with Lid This Low Temp Model has a leaving fluid temperature range of 20F-70F/-6C-21C. Rated to 0°F ambient temperature* 1” MNPT Inlet and Outlet Stainless Steel 1 HP Centrifugal Pump outputs 30 GPM at 30 PSI Single Phase (230V/1P/60HZ/47.2A) and Three Phase (230V/3P/60HZ/35.1A) power available Casters Included (two swivel locking and two fixed) Large Reservoir easily filled from outside, and level indicated with sight gauge 1-Year Parts Warranty 5-Year Warranty on Compressor Welded steel powder-coated frame and full metal cabinet with copper piping connections Digital Temperature controller with Self-Diagnostic control system Rugged Protection, while still easy to maintain and Wash Down High Flow Pump, Long Life, Dependable units! Stainless Steel Plate Evaporators Vacuum brazed with Copper Dependable Copeland Welded hermetic Scroll Compressors 50.5"x38.5"x57" 500 lb UL Certified Please Note: This unit REQUIRES a qualified electrician to wire the necessary plug to the cord. *Please Note: This unit is rated for indoor use only. If you require a chiller rated for outdoor use, please contact our customer service department to request a special order. Cold Shot Chillers are available suitable for outdoor use with ambient temperature ratings as low as -20F.
$21,423.42
-
The Press Club 5" x 5" ROSIN BAGS
ALL ROSIN BAG SIZES & ROSIN PRESSING ACCESSORIES PLATES: 3" x 5", 4" x 7", Press Light, Insulators ROSIN BAGS: 1.25" x 4", 1.5" x 4", 1.75" x 4", 2" x 4", 2.5” x 4.5”, 1.5" x 9", 2” x 9”, 2.5" x 9", 3” x 6”, 3" x 9", 3.5" x 9", 4" x 7", 4" x 12", 5" x 5", 2" Filter Tubes LIMITED EDITION: Round Rosin Bags, Tube Sock Rosin Bags, THCA Mechanical Separate Sheets FUNNELS: 1.25" Funnel, 1.5" Funnel, 2" Funnel, 2.5" Funnel (Coming Soon) DRY SIFT SCREENS: 24" x 12" x 1.25" (Individual / Sets Available) WASH WORK BAGS: 6" Cube, 12" Cube BUBBLE WASH BAGS: 5 Gallon Premium, 5 Gallon All-Mesh, 10 Gallon, 20 Gallon, 32 Gallon, 44 Gallon, 65 Gallon WASHING ACCESSORIES: XL Drying Screens, 0.5mm Collection Card, 5 Gallon Neoprene Insulator Wrap PARCHMENT PAPER: 5" x 5", 6" x 12", 8" x 16", 10" x 10", Roll PARCHMENT ALTERNATIVE: 5 x 5 PTFE Sheets, PTFE Roll PRE-PRESS MOLDS: Pollen Press, 2" x 4", 2" x 9", 2.5" x 2.5", 2.5" x 4.5", 2.5" x 9", 3" x 5", 3" x 9", 4" x 4", 4" x 7" COLLECT: Large Rosin Stamp, 6" Cold Plate, Glass Dab Tool Kit STORAGE: 5 x 5 FEP Sheets, Self Vacuum Cure Jars, Hydro Stones ACCESSORIES: Magnets, Resin Magnets, Trash Bin Organizer, ISO Station, Terp Pearls, Stickers, T-Shirt
$41.40 - $138.15
-
5' HVAC Hose
HVAC Vacuum Pump Hose with Swivel Fittings This Best Value Vacs 5' HVAC Hose has 1/4" swivel fittings on each end. HVAC hoses are built for long life and dependability. A strong, six-sided crimp provides a reliable connection between the hose and barb. The maximum working pressure of these hoses is 500psi with an ultimate burst pressure at 2500psi.
$20.73 - $22.11
-
North Spore 5-Pack Mushroom Monotub Liner Inserts
Made by Max Yield Bins, these food-grade plastic liner inserts were designed to save you time on cleanup and prep for your next grow! They also allow you to easily lift and access your medium without the mess. Features: Fit monotubs with 22" x 15" dimensions Made from food-grade, BPA-free plastic Designed as a perfect structured fit for the Max Yield Bin Made in Canada Cleaning instructions: Clean liner insert between each use to keep all surfaces as sterile as possible. Sanitize by spraying with a 70% isopropyl alcohol solution inside and out. Allow ample time to dry before filling with substrate. DO NOT use bleach or abrasives.
$38.69
-
5.75" Diameter GLASS LID
BVV 5.75" Glass Chamber Lid This tempered soda lime glass lid is available with or without holes. Both feature 5.75" outer diameter and a thickness off 12mm or .472".
$62.20 - $82.93
-
5.75" Vacuum Chamber Gasket
5.75" Vacuum Chamber Gasket Our patented gasket #9475627 This Gasket fits the following Vacuum Chamber Lids: 2 Quart Resin Trap / Vacuum and Degassing Chamber Best Value Vacs 2 Quart Stainless Steel Vacuum and Degassing Chamber 1.5 Gallon (2QT Tank) Dry Ice, Liquid Nitrogen Cold Trap (INNER 2QT Containter GASKET)
$26.26
-
5/16 USS Flat Washer
5/16 USS Flat Washer 5/16 replacement washer for vacuum chamber bulkheads made out of metal.
$0.41
-
5/16-18 Grade 2 Steel Nylon Locknut - 5 Pack
5/16-18 Grade 2 Steel Nylon Locknut 5/16 - 18 Low Profile Lock Nut. This nut fits on vacuum chamber gauges and manifolds. SOLD AS A 5PACK
$1.38
-
5/16-18 Hex Jam Nylon Insert Lock nut Nylock Stainless Steel
5/16-18 Hex Jam Nylon Insert Lock nut Nylock Stainless Steel 5/16 - 18 Low Profile Lock Nut. This nut fits on vacuum chamber gauges and manifolds.
$1.38
-
50% Hydrogen Peroxide Food Grade H2O2
50% Food Grade Hydrogen Peroxide Our Food-grade 50% peroxide tests at ~50.4%. This the strongest peroxide we offer, next to our 35% Food Grade Peroxide, Our Food Grade 50% hydrogen peroxide is formulated with a special stabilizer package (organophosphonate) that replaces transition metals stabilizers typically found in hydrogen peroxide solutions. Our Peroxide is NSF® Certified. NSF-certified means a product was independently verified for safety, sanitation, and quality by NSF. NSF certification is recognized by health departments, government agencies, and industry associations. *Certified under ANSI/NSF Standard 60 Drinking Water Additives-Health Effects. Dosage levels shall be in accordance with NSF requirements. 55 Gallon Drum weights 548lbs, 270 Gallon Tote weighs 2500lbs. hydrogen peroxide usually loses less than 1% of its initial concentration in one year (0.5% for a 50% solution). 50% Hydrogen Peroxide NSF Food Grade Certificate of Analysis 50% Hydrogen Peroxide NSF Food Grade Safety Data Sheet Chemical Formula: H2O2 Molecular Weight: 34.015 g/mol CAS Registry Number: 7722-84-1 Appearance Colorless Liquid Odor: None Density 1.196 g/cm3 @ 20 °C (68 °F) Boiling Point: 114 °C (237 °F) Solubility in water: Completely Soluble GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H272, H302 + H332, H314, H335 GHS Precautionary Statements P210, P220, P260, P261, P264, P270, P271, P280, P283, P301+P317, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P306+P360, P316, P317, P321, P330, P363, P370+P378, P371+P380+P375, P405, P420, and P501 UN Identification Number: 2014 Proper Shipping Name: 50% Hydrogen Peroxide, Aqueous Solution Transport Hazard Class: 5.1, 8 Packing Group: II DOT Placard:
$387.00 - $905.31
-
50% Hydrogen Peroxide Tech Grade NSF, H2O2
50% Technical Grade Hydrogen Peroxide Our Technical-grade 50% peroxide tests at ~50.4%. Is the strongest proxied we offer, next to our 35% Technical Peroxide, Our Technical Grade 50% hydrogen peroxide is formulated with a special stabilizer (organophosphonate) package that replaces transition metals stabilizers typically found in hydrogen peroxide solutions. Our Peroxide is NSF® Certified. NSF-certified means a product was independently verified for safety, sanitation, and quality by NSF. NSF certification is recognized by health departments, government agencies, and industry associations. *Certified under ANSI/NSF Standard 60 Drinking Water Additives-Health Effects. Dosage levels shall be in accordance with NSF requirements. 55 Gallon Drum weights 548lbs, 270 Gallon Tote weighs 2500lbs. hydrogen peroxide usually loses less than 1% of its initial concentration in one year (0.5% for a 50% solution). 50% Hydrogen Peroxide NSF Technical Grade Certificate of Analysis 50% Hydrogen Peroxide NSF Technical Grade Safety Data Sheet Chemical Formula: H2O2 Molecular Weight: 34.015 g/mol CAS Registry Number: 7722-84-1 Appearance Colorless Liquid Odor: None Density 1.196 g/cm3 @ 20 °C (68 °F) Boiling Point: 114 °C (237 °F) Solubility in water: Completely Soluble GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H272, H302 + H332, H314, H335 GHS Precautionary Statements P210, P220, P260, P261, P264, P270, P271, P280, P283, P301+P317, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P306+P360, P316, P317, P321, P330, P363, P370+P378, P371+P380+P375, P405, P420, and P501 UN Identification Number: 2014 Proper Shipping Name: 50% Hydrogen Peroxide, Aqueous Solution Transport Hazard Class: 5.1, 8 Packing Group: II DOT Placard:
$359.36 - $829.29
-
Chemglass 500mL Single Neck RBF, 24/40 Outer Joint
500mL Single Neck RBF, 24/40 Outer Joint Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask.
$81.55
-
50L Double Jacketed Glass Reactor
The Double Jacketed Glass Reactors are ideal for reaction applications involving extreme temperatures. They include an inner jacket for cooling or heating and an outer jacket for vacuum insulation. The outer jacket also alleviates moisture buildup so you can always see exactly what's happening inside the system. Jacketed Reaction vessels are used for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Reaction Vessels can be used as an all in one tool for extraction, refinement, distillation, and homogenization. Consisting of an inner vessel with either one or two jackets, a reactor uses temperature differentials created by a chiller to change it's internal environment. Reaction vessels also operate under vacuum making them ideal for any atmospheric sensitive applications. They can be made out of glass or stainless steel and range in volume from 1L to 100L+. To run a reaction vessel most efficiently, you will need a chiller capable of bringing the internal temperature of the vessel to an extreme low, a chemical resistant vacuum pump, and a cold trap to catch any vapors that might pass through the condenser during operation. BVV™ Jacketed Reaction vessels are simple, cost-effective, and durable machines that allow you to process material quickly and efficiently. BVV 20L and 50L Glass Reactor Diagram Specifications: Glass Material: GG-17 High Borosilicate Glass Internal Volume: 50L 10.5L Jacket Capacity Shelf Material: Aluminum Alloy Homogenizer Power: 110V/60Hz Homogenizer Speed: 0-400 RPM Digital Homogenizer Control Digital temperature probe readout included Double Jacket 3/4" Jacket Connections 1/4" and 3/8" Vacuum Connections Length: 24 in. Width: 30 in. Height: 90 in. Does not include: Chiller, Vacuum System, Cold Trap Requires Assembly ***Note: All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.*** ***Disclaimer: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in WELL VENTILATED AREAS!*** ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.***
$6,910.78 - $7,463.64
-
50L Glass Reactor Shaft Seal Kit 13MM Replacement
50L Glass Reactor Shaft Seal Kit 13MM Replacement This part is made for 50LTGR-V3 reactors. The body is PTFE and has viton shaft seals that are made for mixing shafts with 13mm diameters. It includes a clamp and retaining ring to attach to our glass reactor lids.
$691.08 $552.86
-
50L Neocision ETL Lab Certified Rotary Evaporator
50L Neocision ETL Lab Certified Rotary Evaporator The 50L Neocision ETL Lab Certified Rotary Evaporator is a full-scale system meant to fulfill the needs of large volume production and meet the requirements of a certified laboratory with its ETL certification standards. Featuring an electric lift bath and all PTFE valves for extreme chemical resistance, the 50L Neocision gives users the ability to recover large amounts of solvent in a smaller footprint with highly improved functionality. All Neocision rotovaps feature high-efficiency valves and drain ports making it easy to directly inject solution continuously without the need to stop the system or release vacuum to drain. The temperature and rotation speed are easily controlled from a single digital interface. Our rotovaps are a fraction of the price of more costly systems with the same functionality and evaporation efficiency. To keep your bath heating properly, this unit should only be used with RO or DI water. 10-50L NEO and ECO Rotary Evaporator Diagram Features: ETL Certified for Lab use. Digital temperature and speed control with simple user interface Electric Bath Lift Teflon Coated Bath for corrosion resistance High-efficiency drain port and injection valves Smaller footprint for improved workspace allocation Mobility with locking casters Shorter vapor path for faster evaporation and condensation Direct injection capability for continuous feeding of solution Continuous draining capability without the need to release vacuum or stop the system 1-year warranty on all mechanical parts. Does not include glassware/moving parts Specifications: Model 50L NEOCISION Rotary Evaporator Optimum Ambient Temperature 5~25C / 41~105.8F Glass Material GG-17 High Borosilicate Power (V/Hz) 220-240V 60Hz Single Phase Speed Regulation Digital Step-less Regulation Rotation Speed 0-120 RPM Set Temperature 0-99C / 0-210F Temperature Control Digital Temperature Control Maximum Vacuum Pressure -29.8 inHg Evaporating Flask Capacity 50L (20000ml) Receiving Flask Capacity 20L (10000ml) Condenser Style Main + Auxiliary Vertical Double Helix Evaporation Capacity Alcohol >/= 12 L/H Heater Max Current Draw (Amps) 25 Water Bath Material 304 Stainless Steel Water Bath Size 17.7 x 9.8 in. Lifting Function Electric Lifting Stroke 190mm / 7.5 in. Total Power Consumption (kW) 4.1 kW Dimensions 49 x 24 x 83 in. Weight 155 lbs Vacuum Connection 10mm / 3/8 in. Barb Condenser Connection 10mm / 3/8 in. Barb Warranty 1 Year Excluding: Moving Parts Glassware Certifications ETL Rotovap Quick Start Guide This guide gives basic quick start instructions for rotovaps. It is intended to provide a starting point for learning the process. Parameters should be adjusted to suit specific needs. Clean and assemble unit. Make sure all pieces are cleaned and sterilized using an alcohol solution. Connect chiller to condenser and set to 0C (32F). Always fill a rotovap condenser from the top down (chiller output to top of condenser, chiller input to bottom of condenser). Connect vacuum pump to cold trap and connect cold trap to vacuum port on rotovap. Turn on heat bath and set to 40C (113F). Once heat bath, chiller and cold trap have reached desired temperatures, turn on rotovap motor and set speed to approximately 100 RPM (does not have to be precise). Keep in mind, higher RPM’s will increase evaporation power but also increase heat load. Start vacuum pump and allow vacuum to pull down for a few minutes before injection. Once vacuum has been pulled to a sufficient level (does not have to be precise but should be below 100 Torr), using the injection valve, very slowly inject approximately 500 mL of solution into evaporating flask and then close the valve. Allow this small amount to begin evaporating. You may see the chiller begin to rise in temperature, this is called “priming” the rotovap. Once the temperature stops rising or all liquid is almost completely evaporated, open the injection valve again very slowly so that a small amount of liquid begins to enter the evaporating flask. Do not close injection valve this time but continue to allow solution to enter the evaporating flask. At this point you must try to match the input speed to the output speed. What this means is that you should be injecting the same amount of liquid into the rotovap that is equal to the amount of liquid dripping from the condenser into the receiving flask. You will know that the input speed and output speed are matched because the chiller will remain at a stable temperature. If the chiller begins to rise, then you are injecting too much liquid. Dial back the valve until the chiller stabilizes. Once everything is stabilized, you may walk away from the rotovap if necessary. Check every so often to make sure temperatures remain stable and evaporation continues efficiently. ***Note: All units are inspected for broken glass or parts before unit is shipped. If unit arrives damaged or glass is broken (this does not include minor imperfections or scuffs in glassware), Customer MUST contact BVV™ within 3 days of delivery to file a claim and receive a replacement part. If customer DOES NOT contact BVV™ within 3 days of delivery responsibility for replacement parts falls on the customer and they must pay for replacement pieces.*** ***Note: This item will ship by freight only.*** ***Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.***.
$12,854.05
You have seen 384 out of 1726 products