Shop Components

748 products

Filter

Show previous products

  • BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid BVV Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid

    Compression 10" Tri-Clamp x (2) 2" Tri-Clamp x (1) 1.5" TriClamp x (2) 3/8" Compression x 1/4" Compression x 1/2" Compression Hemispherical Lid This End Cap comes with (4) Compression connections and (2) 1.5" and (1) Tri-Clamp ferrules welded to the end cap with a sanitary weld with a 3" Tube Extension Below the Lid. They allow the user to adapt and connect a tube stub connection to the (1) 1/4", (2) 3/8", and (1) 1/2" port on a Tri-Clamp lid and the Tri-Clamp Connections. These 7 connections are welded on a 10" Hemispherical Tri-Clamp End Cap. Specifications Material: 304 Stainless Steel Connection Types: (2) 2" and (1) 1.5" Tri-Clamp with 3" Tube Extension Below Lid on Center Tri-Clamp Port 10" Tri-Clamp (1)1/4", (2) 3/8" and (1)1/2" Female Compression Connections Standard: 3A

    Read more

    $454.97

  • Chemglass #45 Rodaviss Joint Cap w/ Hole

    Chemglass Chemglass #45 Rodaviss Joint Cap w/ Hole

    Chemglass #45 Rodaviss Joint Cap w/ Hole   Threaded cap fits CG-172 outer joint, Rodaviss®. When used with CG-305 Viton o-rings, provides for greaseless high vacuum seal.

    Read more

    $28.44

  • Sale -25% P10 BVV™ Distillation Head - USA Made

    P10 Distillation Head - USA Made

    P10 BVV™ Distillation Head P10 Distillation Head has 2 sets of vigreux in the distillation column with 45/50 lower joint, 24/40 Thermometer Joint, and 34/45 side joint and includes GL-14 barb connections. MADE IN THE USA Designed for 10 Liter Flasks Set of 2 vigreux to allow for more packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.  **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

    Read more

    $1,137.43 $853.07

  • Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE

    View options

    Across international Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE

    Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE * UL certification NOT available for the 220V model The new corrosion resistant Ai SuperVac 21 cfm commercial grade vacuum pumps are now UL certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area. SMF-020 Exhaust filter thread size: M24X1.5  

    Read more

    $4,962.02 - $5,104.20

    View options

  • Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump

    View options

    Across International Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump

    Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump   *UL certification NOT available for the 230V model The new Ai SuperVac 11.3 cfm commercial grade vacuum pumps are now UL certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. They are also more powerful (1,100kW vs 750W) and corrosion resistant. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area. SMF-020 Exhaust filter thread size: M24x1.5

    Read more

    $3,682.41 - $3,824.59

    View options

  • Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump

    View options

    Across International Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump

    Ai SuperVac 5.6 Cfm Corrosion-Resist 2-Stage Pump Ai SuperVac-5C 5.6 cfm commercial grade vacuum pump now come standard with UL certified, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan.  Ai SuperVac-5 dual-stage vacuum pump will take your vacuum down to 0.3 micron in minutes. These pumps are designed for reliable long time continuous operation. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. Adjustable gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust. It is important to note that pumps should always be ran in a well ventilated area.

    Read more

    $2,687.17

    View options

  • Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE

    View options

    Across International Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE

    Ai EasyVac 9 Cfm 2-Stage Vacuum Pump With Mist Filter ETL/CE Vac 9 CFM vacuum pumps are now 110V/220V 50/60Hz switchable and ETL and CE certified. Ai EV9 are dual-stage high speed sliding-vane rotary compact vacuum pump with KF25 vacuum connector. Comes with all necessary fittings and a exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. It is important to note that pumps should always be ran in a well ventilated area. Free KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included.

    Read more

    $1,123.21

    View options

  • AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE

    View options

    Across International AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE

    AI Vacuum Pump With Oil Mist Filter AI EasyVac 7 Cfm ETL/CE Across International EasyVac 7 single-stage sliding-vane rotary compact vacuum pump with 3/8" hose barb vacuum connector. Comes with a 3-foot food grade silicone hose and a exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. It is important to note that pumps should always be ran in a well ventilated area. Free three feet 3/8" white premium food grade silicone vacuum tubing (a $19.99 value) included.  

    Read more

    $838.85

    View options

  • Sale -30% Refurbished GRACO Pneumatic Diaphragm Pump -40C

    Refurbished GRACO Pneumatic Diaphragm Pump -40C

    Graco Pneumatic Diaphragm Pump for Ethanol NOTE: This product has been refurbished and tested to be in good working order. The product may show cosmetic signs of use such as discoloration or minor scratches. This air driven diaphragm pump is designed to be used with ethanol filtration, pumping processes, and BVV Centrifuges. It's unique rugged design can withstand temperatures from -40C to -80C. The inner diaphragms are made out of PTFE and the main body of the pump is made out of 316 Stainless Steel. Specifications -40C -80C Power Source Air Operated 100PSI 28CFM Certification Required No Certifications ATEX Fluid Section Material Stainless Steel Pump Inlet/Outlet 716-3/4 Inc, 16gpm (19mm, 61lpm) Center Section Polypropylene Standard Air Vale (NPT) Porting SST Standard Porting (NPT) Seats 316 SST Balls PTFE Diaphragms PTFE  PTFE Overmolded Manifold O-rings PTFE Max Operating Temp. 220°F (105°C)

    Read more

    $5,687.13 $3,980.99

  • Sale -20% Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump

    Refurbished - Graco TE30-0342 Electric Driven Double Diaphragm Pump

    QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback Quiet operation reduces plant noise and improves employee safety and health Smart pump control provides more accurate flow set points and built-in I/O Efficient Electric Motor Powder-coated aluminum electric drive 120 VAC 1Ph motor with 15 ft flying leads CID1 Groups C,D,T4 Zone 1 AEx d b IIB T4 Gb hazardous location approval Materials of Construction Stainless steel fluid section with NPT end port Internal components include 316 stainless steel seat, PTFE ball, PTFE overmold diaphragm and PTFE manifold o-ring

    Read more

    $7,539.71 $6,031.20

  • Sale -30% Industrial filter system with a yellow background

    Refurbished - Pressure Filtration System - 6 x 28 - Bare

    This filter system is designed for high flow rates to filter unwanted precipitates from your oleoresin. The housing provides full enclosure of your filter bags, which are fully supported by the strainer basket within the housing to prevent blowouts. Pressure and high flow rates may be applied to get the fastest flow through filter bags. Using the housing allows full exhaustion of a bag prior to changing it without the sacrifice in filtering time.These filter bag housings use an eye-bolt clamp style to allow for high pressure without leakage, while still maintaining an easy to remove cover. When one filter bag gets filled, it can easily be swapped out by removing the lid while not under pressure and pulling the old bag out. The main seal on the housing is Buna-n rubber. The liquid pump is of 316 Stainless Steel Construction with PTFE seals and runs on compressed air or nitrogen. Built options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder With Pump options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder 1x 316 Stainless Steel Liquid pump Connecting hose or hardline tubing 4x Nomex Filter Bags (1μm, 5μm, 25μm, and 100μm)   Specifications PFS-790-15 PFS-790-45 Flow Rate (GPM) ≤15 ≤45 Max Pressure (PSI) 100 @28 CFM Volume (in^3) 790 Working Temperature (°C) -40 - 100 Air Hose Connection ¼” JIC Flare ½” JIC Flare Filter Bag Housing Dimensions (LxWxH) 14” x 11” x 41” Filter Bag Trade Size #8 Included PVC Hose size ID ¾” 1”   *This unit requires an air compressor for operation (not included)

    Read more

    $966.81 $675.35

  • 48" Jacketed Collection Column (6" Tri-Clamp) 48" Jacketed Collection Column (6" Tri-Clamp)

    48" Jacketed Collection Column (6" Tri-Clamp)

    This column can be used as a collection or solvent vessel for a larger rack mounted extractor. The top and bottom tri clamp size are 6" to allow for a higher pressure rating on the entire vessel. The midsection of the spool expands from 6" at the tri-clamp connection to a 10" column. The jacket of the vessel is baffled and has 1.5" Tri-Clamp* ports to run fluid through for good temperature control. This column is intended to hold 55lbs of hydrocarbon solvent, it can be rack mounted with 12" pipe hangers. Max Pressure: 300psi @70°F (dependent on clamp used) Material: 304 Stainless Steel Capacity: 55 Liters Height: 48" BVV™ 600E1000X48FJ - Drawing  *Photos show a different jacket connection, please see the above drawing for changes to this item

    Read more

    $2,559.21

  • 1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner 1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner

    View options

    2" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner

    2" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner This premium industrial hose assembly delivers superior performance in chemical processing and high-pressure fluid transfer applications. The convoluted PTFE liner provides exceptional chemical compatibility and flexibility, while the 304 stainless steel braid ensures structural strength and durability. Tri-Clamp end connections enable quick, reliable system integration. Performance Specifications: Connection Type 2" Tri-Clamp Liner Material PTFE (Teflon) Braid & Flanges 304 Stainless Steel Temperature Range -65°F to 450°F Pressure Rating 580 PSI Chemical Resistance Excellent Bend Radius 13" (24" length) / 5.5" (48"-96" lengths) Critical Operating Guidelines: Maintain bend radius specifications to prevent PTFE liner kinking and loss of hose integrity. The 24" version accommodates 90-degree bends only.

    Read more

    $390.99 - $746.44

    View options

  • Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps

    Across International Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps

    Ai Openable 500mL Glass Trap W/ Upward Ports For Ai -40C Cold Traps Across International 500mL glass trap for Ai 2nd Gen T40 -40C cold traps. Upward hose barb ports give you safer and easier vacuum tubing connection and removal. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 45/50 standard taper 2" OD x 15" height Glass material: high borosilicate glass 3.3

    Read more

    $284.36

  • Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Across International Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Ai Openable Glass Trap For Ai T Series -40°C & -80°C Cold Traps cross International glass trap for Ai 1st Gen T series -40C and -80C cold traps. Features Fully openable for easy cleaning Inlet and outlet: 3/8" hose barb Joint type: 34/45 standard taper 2" OD x 10" height Glass material: high borosilicate glass 3.3

    Read more

    $170.61

  • TRS21 Anti-spark/explosion pump Standard

    TRS21 Anti-spark/explosion pump Standard

    The TRS21 is an Anti-Spark/Explosion pump designed and built specifically for R-600, Ignition Proof Construction meets ANSI/ISA 12:12.1 The pump can be used to recirculate the solvent through the system increasing speed of processing and yield, or just to reclaim the solvent to greatly increase recovery time to minutes.   Key Features: • CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less Compressor Specifications:• Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min• Ignition Proof Construction ANSI/ISA 12:12.1• Power : 115 VAC, 60 Hz, 10 Amps• Power: 850 watts • Filtration: Internal 100 mesh Screen integrated into Suction Port• Weight : 24 LBS MaintenancePlease note regular maintenance and replacement of seals is NOT covered under warranty as these are normal wear and tear items. Compressor Seals will require re-build after 200-240hrs of operation, depending on use. We stock the following compatible rebuild kits for your convenience: Upgraded TRS21 Rebuild Kits: TRS21 Upgraded Top Piston Assembly TRS21 Upgraded Stainless Steel 2-Piece Piston and Rod Design for Hydrocarbon Extraction TRS21 Upgraded Compressor head SS ¼” SAE 45D IN and OUT fittings TRS21 Complete Connecting Rod Assembly Upgrade Kit TRS21 2 Piece Piston Tool CPS Rebuild Kits: TR21X1 Valve Rebuild Kit TR21X2 Complete Rebuild Kit TR21X3 Piston Rebuild Kit TR21X4 Head Rebuild Kit ***DISCLAIMER TO CUSTOMER: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.  

    Read more

    $1,244.06

  • Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Across international Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps

    Ai 1-Piece Glass Trap For Ai T Series -40°C & -80°C Cold Traps Across International one-piece glass trap for Ai 1st Gen T series -40C and -80C cold traps. Features Inlet and outlet: 3/8" hose barb 2" OD x 10" height Glass material: high borosilicate glass 3.3

    Read more

    $71.09

  • Apiezon Q Sealing Compound

    Apiezon Apiezon Q Sealing Compound

    Apiezon Q Sealing Compound Apiezon Q Compound sealant can be used to seal around the edges of flat unground joints, to blank off parts of an apparatus temporarily or to seal glass cylinders to metal plates to produce temporary vacuum enclosures. Whether sealing joints, filling in holes or filling gaps in a vacuum system, it is extremely versatile and is the ideal leak sealant in a wide array of uses and industries. Temporary vacuum sealant Versatile product suitable for a multitude of uses Excellent waterproof medium Easy to use and to remove Ambient temperatures (10 to 30°C) 10 year shelf life MSDS Technical Data Sheet

    Read more

    $426.53

  • Apiezon M grease

    View options

    Apiezon Apiezon M grease

    Apiezon M grease Apiezon M Grease is a silicone and halogen-free high vacuum grease and is ideally suited to all manner of high vacuum applications. Its inherent versatility means M Grease is also frequently used for non-vacuum purposes in both scientific and industrial settings and it is approved for use by NATO. Apiezon M Grease is designed for use in high vacuum environments at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon M Grease is a silicone- and halogen-free high vacuum grease which: does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures exhibits a vapour pressure of 1.7 x 10-9 Torr at 20°C has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As a high vacuum grease with excellent lubrication properties and radiation resistance, Apiezon M Grease is used for many diverse applications. In particular, M Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon M Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon M Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon M Grease this is not a problem. As a halogen-free product, Apiezon M Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, M Grease maintains excellent lubrication properties in high radiation applications, despite a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. Apiezon M Grease has strong powers of absorption, particularly for other hydrocarbon molecules due to its complex hydrocarbon structure and very high molecular weight. Consequently it is frequently used as a stationary phase in gas chromatography. Apiezon M Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $206.16 - $341.23

    View options

  • Apiezon L grease. 25g tube

    Apiezon Apiezon L grease. 25g tube

    Apiezon L grease. 25g tube Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease suitable for use scientific and industrial applications. Apiezon L Grease has the best vapour pressure properties of all the Apiezon products and is therefore suitable for use in ultra-high vacuum applications. L Grease is regularly used by highly respected organisations such as The European Space Agency, NASA and NATO. Apiezon L Grease is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon L Grease is a silicone and halogen-free ultra-high vacuum grease which: exhibits an extremely low vapour pressure of 7 x 10-11 Torr at 20°C does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ provides excellent lubrication is recommended for use at ambient temperatures has built-in radiation resistance has powerful ‘gettering’ action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces is easy to clean and remove as it is soluble in hydrocarbon solvents As an ultra-high vacuum grease with excellent lubrication properties and radiation resistance Apiezon L Grease is used for many diverse applications. In particular, L Grease is commonly used in scientific and industrial sealing and lubrication applications. Apiezon L Grease has been especially formulated to provide excellent lubrication while maintaining an efficient gas seal and is therefore widely used in the manufacture and servicing of high performance vacuum pumps. Using silicone-free Apiezon L Grease avoids the problems of ‘creep’ and ‘carry over’ which can often lead to sample contamination. Therefore, it is regularly used in analytical techniques such as infrared or mass spectrometry where sample contamination must be avoided. Similarly, ‘creep’ can cause problems in industrial paint or metal deposition processes as trace amounts of silicone on surfaces can prevent the adherence of paint, leading to poor coverage. When using silicone-free Apiezon L Grease this is not a problem. As a halogen-free product Apiezon L Grease has a built-in resistance to irradiation. Other high vacuum greases such as esters, silicones or halogenated paraffins decompose at radiation levels of 0.1 MGy or less. In contrast, L Grease maintains excellent lubrication properties in high radiation applications, demonstrating only a small increase in stiffness when irradiated with 4 MeV electrons to 1 MGy. To find out more about Apiezon L Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon L Grease Vapour Pressure Graph MSDA Techinical Data Sheet

    Read more

    $298.57

  • Apiezon AP101 grease. 50g tube

    Apiezon Apiezon AP101 grease. 50g tube

    Apiezon AP101 grease. 50g tube Apiezon AP101 is a silicone-free, excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. Apiezon AP101 is a specialist, anti-seize vacuum grease, containing PTFE, which confers superior anti-seize properties providing glass and metal surfaces with long-lasting lubrication and protection from fusing and corrosion. Apiezon AP101 is a silicone-free anti-seize vacuum grease which: is ideally suited for use in low to medium vacuum ranges having a vapour pressure of <10-5 Torr at 20°C has anti-seize properties, making it an effective protector and lubricant for metal surfaces which may be subject to seizure or corrosion is a critical lubricant is insoluble in most solvents, is resistant to water, alcohols, ketones and esters resists attack from aqueous acid and alkali solutions, alcoholic alkali solutions and corrosive gases. is suitable for use over a wide temperature range does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents. Apiezon AP101 with its superior anti-seize properties is typically used to maintain the smooth operation of stopcocks and taps in scientific and industrial settings. Coupled with easy separation of ground or polished glass joints AP101 is an excellent general purpose grease for laboratory use. The value of Apiezon AP101 anti-seize properties is not limited to laboratory or glassware use, but is equally effective when used on metal equipment which may be subject to seizure or corrosion. Just a small amount of AP101 on fastenings which, when exposed to corrosive environments would normally jam solid, will ensure they are protected. Apiezon AP101 is an excellent general purpose grease for sealing joints and is ideal for use in critical lubrication conditions such as highly stressed bearings. Being hydrocarbon based, Apiezon AP101 does not suffer from the problems of “creep” or “carry over” which is traditionally associated with silicone greases. It reduces sample contamination and consequently the risk of interference in analytical techniques such as infra-red and mass spectrometry. Additionally AP101 can be used with confidence in paint spraying and metal deposition processes. To find out more about Apiezon AP101 Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP101 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $206.16

  • Apiezon AP100 grease. 50g tube

    Apiezon Apiezon AP100 grease. 50g tube

    Apiezon AP100 grease Apiezon AP100 vacuum grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases. Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. Apiezon AP100 Grease is a silicone-free ultra high vacuum lubricating grease which: has anti-seize properties, making it an effective protector and lubricant in ultra-high vacuums exhibits extremely high levels of lubricity demonstrates an extremely low vapour pressure of 7 x 10-11 Torr at 20°C is recommended for use at ambient temperatures does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’ is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents The unique properties of Apiezon AP100 lubricating vacuum grease mean it is frequently used to protect stepping motors and gearboxes from corrosion and abrasion, particularly when they are subjected to high load conditions. AP100 is also used to prevent seizure in stopcocks, taps and small metal fastenings. The creep resistance of Apiezon AP100 benefits scientific and semiconductor users alike. AP100 helps to increase the accuracy of analytical techniques and improve yields in semiconductor manufacture by contamination avoidance. In addition, AP100 is used for surface coating applications where silicone contamination can lead to poor surface adhesion and incomplete coating defects. To find out more about Apiezon AP100 grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online. Apiezon AP100 Grease Vapour Pressure Graph MSDS Technical Data Sheet

    Read more

    $412.32

  • Viton O-Ring For 24/40 Ground Joint

    Viton O-Ring For 24/40 Ground Joint

    Replacement viton (FKM) o-ring for 24/40 ground glass joints with an o-ring style seal

    Read more

    $5.69

  • Sale -25% 6" - 4" Hemi Reducing Elbow 6" - 4" Hemi Reducing Elbow

    6" - 4" Hemi Reducing Elbow

    This tri clamp 6” - 4” reducing end cap has a 90 degree bed that works well for the base of heat exchangers and also in falling film evaporators. 

    Read more

    $284.36 $213.27

  • Sale -33% Glas-Col Thermocouple Type "J"

    Glas-Col Glas-Col Thermocouple Type "J"

    1/4" x 12" 72" leads, mini plug

    Read more

    $191.94 $127.96

  • Sale -36% Mastercool 5 CFM Dual Stage Vacuum Pump--USA Made

    Mastercool Mastercool 5 CFM Dual Stage Vacuum Pump--USA Made

    The Mastercool 90065 2-Stage Vacuum Pump is durable and time-tested to stand up to the most grueling conditions and will provide years of reliable service. This model is an excellent choice for small to medium-sized systems with a 2.5 lb. to 10 lb. charge capacity. Electrical: 110V, 60 Hz Stages: 2 Free Air Displacement: 5 CFM Motor: 1/3 HP Oil Capacity: 18 oz.

    Read more

    $497.62 $319.90

  • Safety Valve, Soft Seat, 1/2In, 250 PSI, SS

    View options

    CONRADER Safety Valve, Soft Seat, 1/2In, 250 PSI, SS

    Valve Type: Soft Seat (M)NPT Inlet (In.): 1/2 in Preset Setting (PSI): 250 psi Rated CFM @ Set Pressure: 449 cfm Max. Temp. (F): 400 °F Body Material: Stainless Steel Seal: Viton Spring: 17-7 SS Seat: Stainless Steel Standards: ASME Boiler and Pressure Vessel Code Section VIII Division 1; CRN; ISO 9001 Application: Air; Gas UNSPSC: 40141604 Country of Origin: USA

    Read more

    $270.14

    View options

  • Sale -40% 1/2 in. Tube Fitting x 1/4-18 MNPT, 316 SS

    SSP Corporation 1/2 in. Tube Fitting x 1/4-18 MNPT, 316 SS

    Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 1/2 in Connection 2 - Type Male National Pipe Thread Connection 2 - Size 1/4-18 Brand Series Duolok Shape Elbow End Connections TF x MNPT Production Category 1 End Connection Type Duolok Tube End by Male National Pipe Thread

    Read more

    $35.54 $21.33

  • 350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate 350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate

    View options

    Across International 350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate

    350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate A magnetic stirrer or magnetic mixer is a laboratory device that employs a rotating magnetic field to cause a stir bar (also called "flea") immersed in a liquid to spin quickly, thus stirring it. A rotating magnet or a set of stationary electromagnets placed beneath the vessel with the liquid may create a rotating field. Since glass does not affect a magnetic field appreciably (it is transparent to magnetism), and most chemical reactions take place in glass vessels (i.e., see beaker (glassware) or laboratory flasks), magnetic stir bars work well in glass vessels. On the other hand, the limited size of the bar means that magnetic stirrers can only be used for relatively small experiments. They also have difficulty dealing with viscous liquids or thick suspensions. Mechanical stirring is typically needed for larger volumes or more viscous fluids. Magnetic stirrers are often used in chemistry and biology. They are preferred over gear-driven motorized stirrers because they are quieter, more efficient, and have no moving external parts to break or wear out (other than the simple bar magnet itself). Because of its small size, a stirring bar is more easily cleaned and sterilized than other stirring devices. They do not require lubricants, which could contaminate the reaction vessel and the product. They can be used inside hermetically closed vessels or systems without complicated rotary seals. Magnetic stirrers may also include a hot plate or other liquid heating methods.    Model  HP5  Electrical requirements  110V 60Hz 1-Phase, 450 watts  Temperature range  Ambient to 350°C  Heating plate  Diameter: 5.5 inches Material: ceramic-coated aluminum  Stirring  Min. speed: 110 rpm, max. speed: 2000 rpm Motor power: 40 watts Motor type: brush-less DC motor Max. stirring volume: 0.8 gallons (3 liters, water as media)  Controller  PID control with digital temperature and rotation speed display  External thermocouple  Type: PT100 Cable length: 35 inches Stainless steel probe length: 11 inches Stainless steel probe diameter: 5 mm  Dimensions (WxDxH)  Unit: 6.5 x 12 x 4.25 inches, shipping: 16 x 9.5 x 7.5 inches  Weight  Unit: 9 lbs, shipping: 18 lbs  Safety  Thermocouple failure protection Built-in fuse protection  Certification  ETL tested to UL and CSA standards (optional), CE (standard)  Warranty  One year     Standard package    Part description  Quantity Part image  Ai HP5 digital heated magnetic stirrer 1 set    External temperature probe Cable Length: 35", Probe Length 11" 1 pc  Internal temperature plug 1 pc    Boss head 1 pc    Stainless steel support rod (16 inches) 1 pc    PTFE coated stir bar 2 pcs    PTFE-coated magnetic stir bar remover 1 pc  4 prong stainless steel clamp opens to 3 1/2" 1 pc    User's manual 1 pc

    Read more

    $540.28 - $753.54

    View options

  • Advanced Extraction Labs ZETA Extra Large Series C1D1 Indoor Booth Advanced Extraction Labs ZETA Extra Large Series C1D1 Indoor Booth

    View options

    Advanced Extraction Labs Advanced Extraction Labs ZETA Extra Large Series C1D1 Indoor Booth

    Advanced Extraction Labs ZETA Extra Large Series C1D1 Indoor Booth Zeta Labs Indoor Booth Series Zeta advanced extraction labs are the largest size and are made to handle large extraction environments. Regarding big XL labs and extraction systems, the Zeta Series lab is up to the task.  These units can be as large as you can imagine and come in many configurations. Like our other modular units, these units are expandable and can be made larger anytime. These labs come fully equipped and can be used for CBD, THC, and various other extraction types. ***Note: C1D2 option, Duct Package, Mechanical Installation, Fire suppression, and Electrical Installation available upon request. 

    Read more

    $268,605.81 - $305,296.31

    View options

  • Advanced Extraction Labs EXXA Series C1D1 Indoor Booth Advanced Extraction Labs EXXA Series C1D1 Indoor Booth

    View options

    Advanced Extraction Labs Advanced Extraction Labs EXXA Series C1D1 Indoor Booth

    Advanced Extraction Labs EXXA Series C1D1 Indoor Booth Exxa Series Exxa Series is the perfect choice for labs with a high output. This Advanced Extraction Labs unit is made with accessibility and safety in mind. Our large front doors are ideal for moving equipment in and out of the c1d1 extraction booth. This lab is compatible with all extraction types and can be made into a dual-zone environment. This lab has all safety and gas detection systems and can be made in multiple configurations to best suit your needs. One of our larger extraction booths, our Exxa series is a C1D1 Extraction lab and can be used for CBD, THC, and various other extraction types. These labs are modular and can be expanded.    ***Note: C1D2 option, Duct Package, Mechanical Installation, Fire suppression, and Electrical Installation available upon request. 

    Read more

    $135,358.94 - $232,335.10

    View options

  • Advanced Extraction Labs DYS Economy Series C1D1 Indoor Booth Advanced Extraction Labs DYS Economy Series C1D1 Indoor Booth

    View options

    Advanced Extraction Labs Advanced Extraction Labs DYS Economy Series C1D1 Indoor Booth

    Advanced Extraction Labs DYS Economy Series C1D1 Indoor Booth DYS Series DYS Series advanced extraction labs are our most economical model, and they are made without compromising product quality. These C1D1 booth Labs come fully equipped with all necessary gas detection and safety features, high-efficiency filtration, and a variety of sizes. ***Note: C1D2 option, Duct Package, Mechanical Installation, Fire suppression, and Electrical Installation available upon request. 

    Read more

    $54,511.10 - $88,505.90

    View options

  • Advanced Extraction Labs Mega Deluxe Series C1D1 Indoor Booth Advanced Extraction Labs Mega Deluxe Series C1D1 Indoor Booth

    View options

    Advanced Extraction Labs Advanced Extraction Labs Mega Deluxe Series C1D1 Indoor Booth

    Advanced Extraction Labs Mega Deluxe Series C1D1 Indoor Booth Mega Deluxe Series The Mega Deluxe series extraction lab is made for medium to large extraction environments. These labs are modular and can be disassembled and reassembled with ease. They are fully equipped and come with an optional permit package, too. ***Note: C1D2 option, Duct Package, Mechanical Installation, Fire suppression, and Electrical Installation available upon request. 

    Read more

    $92,415.80 - $118,235.35

    View options

  • Advanced Extraction Labs Mega Economy Series C1D1 Indoor booth Advanced Extraction Labs Mega Economy Series C1D1 Indoor booth

    View options

    Advanced Extraction Labs Advanced Extraction Labs Mega Economy Series C1D1 Indoor booth

    Advanced Extraction Labs Mega Economy Series C1D1 Indoor booth Mega Economy Series The Mega Economy series advanced extraction labs are the only choice for an affordable, functional lab. This unit is turnkey and ready to go, equipped with everything you need, from safety features to gas detection. Labs can be configured to meet your needs! This booth is legitimate if you're just starting out in the Extraction business with C1D1. All the trimmings you're going to need at a one-time cost. You buy it; you start using it. We're experts at setting these up to meet your requirements. Call us, and we'll walk you through this from start to finish. ***Note: C1D2 option, Duct Package, Mechanical Installation, Fire suppression, and Electrical Installation available upon request. 

    Read more

    $63,599.84 - $99,524.71

    View options

  • Advanced Extraction Labs Micro Series C1D1 Indoor Booth Advanced Extraction Labs Micro Series C1D1 Indoor Booth

    View options

    Advanced Extraction Labs Advanced Extraction Labs Micro Series C1D1 Indoor Booth

    Advanced Extraction Labs Micro Series C1D1 Indoor Booth Micro Series This advanced extraction labs is designed for small to medium-level extraction production businesses, the walk-in style for C1D1 indoor booths or C1D2 environments, for those using ethanol, post-extraction process, and various solvents. ***Note: C1D2 option, Duct Package, Mechanical Installation, Fire suppression, and Electrical Installation available upon request.   

    Read more

    $47,718.54 - $61,052.44

    View options

  • Sale -53% ASME Certified 10LB Jacketed Collection Base 304L - Bare

    ASME Certified 10LB Jacketed Collection Base 304L - Bare

    ASME Certified 10LB Jacketed Collection Base 304L - Bare This is a custom manufactured USA made ASME Certified 100LB Jacketed Collection base with UM Stamp and made out of 304L Stainless Steel. This base is designed to be configured to any application and can even be used as a solvent tank. This tank comes bare with no fittings and will hold around 50LBS of liquid butane and is able to have fluid circulated around the outer jacket to increase recovery speeds in the extraction system. **This Item will ship Via FREIGHT ONLY. Specifications Material 304L Stainless Steel Certification: ABILITY ENGINEERING TECHNOLOGY INC. ASME / UM / NB MAWIWP 350 PSI at 150°F MAWEWP N/A MIN TEMP -20°F at 350PSI Butane Capacity ~50LBS Connection Sizes: 6" Tri-Clamp (2) 1" NPT (2) 1/2" NPT - Outer Jacket Ports (2) 3/8" NPT Weight 146LBS Outer Dimensions: 32-7/8" Tall 14" Diameter Inner Dimensions: 24" Tall 12" Diameter

    Read more

    $4,265.34 $1,990.49

  • Welch DUOSEAL Two Stage - Refrigeration 1402B-46

    Welch Vacuum - Gardner Denver Welch DUOSEAL Two Stage - Refrigeration 1402B-46

    Welch DUOSEAL Two Stage - Refrigeration ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details: 115V, 60Hz, 1 Ph with N.Amer, 115V Plug Deep vacuum for fast evacuation and dehydration Durable pump, precision machined Gas ballast for high vapor loads. Rugged DuoSeal belt-drive vacuum pumps enable fast, thorough evacuation of refrigeration systems. Features high flow and deep vacuum with low pump RPM and large oil reservoirs for extended life and reduced maintenance. Includes handles for enable positioning.    Specifications: Model Number 1402B-46 Applications Service Lithium Bromide absorption chillers to 500 -700 tons, fluorcarbon or ammonia chillers to 100 to 200 tons Type DUOSEAL Two Stage - Refrigeration Free Air Displacement m3/hr (l/min.) @50Hz 5.6 Ultimate Pressure 160 Maximum Vacuum 1 x 10-4 (1.3 x 10-4) Oil Capacity 525 Motor Horsepower (watts) 2.25 Adjustable Vac. / Gas Ballast Yes Tubing Needed 13/16" ID Hose or 3/4" Flare Fitting Intake Thread NPT 1-20 ISO Exhaust / Intake Flange 1-20 Overall Dimensions LxWxH in.  20" x 12" x 15" Ship Weight 128(58)

    Read more

    $6,291.38

  • Edwards EMF10 Dual-Stage Exhaust Mist/Odour Filter Edwards EMF10 Dual-Stage Exhaust Mist/Odour Filter

    View options

    Edwards Edwards EMF10 Dual-Stage Exhaust Mist/Odour Filter

      Edwards EMF10 Dual-Stage Exhaust Mist/Odour Filter OverviewMist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. The EMF10 mist filter is suitable for use with RV3, RV5 and RV8 pumps. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist. Supplied with NW25 clamp, centering ring and O ring, NW25 to 3/4 inch BSP adaptor.Dimensions Height: 6.72" Width: 3.81"

    Read more

    $918.47 - $1,292.40

    View options

  • Edwards E2M80 57 CFM Dual-Stage High Capacity Vacuum Pump Edwards E2M80 57 CFM Dual-Stage High Capacity Vacuum Pump

    Edwards Edwards E2M80 57 CFM Dual-Stage High Capacity Vacuum Pump

    Edwards E2M80 57 CFM Dual-Stage High Capacity Vacuum Pump Brand new Edwards E2M80 high capacity vacuum pump with one year manufacturer warranty from Edwards. https://shop.edwardsvacuum.com/products/a36504940/view.aspx Overview Edwards E2M series two stage oil sealed rotary vane vacuum pumps are renowned for their high ultimate vacuum, rapid pumping speeds, quiet operation and ability to handle water vapour. These direct drive rotary vane pumps are inherently compact and vibration free, and with their finger-proof fan and coupling housings they offer excellent operator protection.A comprehensive range of accessories is available to allow use on a wide variety of vacuum applications.Supplied with Ultragrade 70 Oil. Fomblin must be purchased separately for PFPE prepared pumps E2MFX. Technology Reliable system protection devices: Every pump has protection devices to prevent oil and air suck-back into the vacuum system if the pump stops while under vacuum. A variety of protection devices are used, depending on the pump size and cost, but emphasis is always placed on reliability and simplicity. When you use gas ballast on some of the pumps, you must use a solenoid operated gas ballast control valve to prevent air suck-back.Positive Pressure Oil Lubrication: The EM pumps incorporate a well proven positive pressure oil lubrication system which as been developed by Edwards to ensure correct lubrication in all duty modes and particularly to prevent oil starvation with high gas loads.An integral oil pump ensures that a more than adequate oil flow is pumped throughout the stator/rotor assembly at all times. This oil lubrication system means that the level of oil in the reservoir is less critical than with other pump designs. All pumps can operate with oil levels as low as 50-70 of the maximum. A full length, easily visible oil level sight glass allows you to conveniently monitor the oil level.Gas Ballast Facility: The EM pumps have a gas ballast valve. The valve is used to introduce a suitable gas into the stator during the compression stage: this prevents condensation of vapors inside the pump, dilutes and ejects corrosive gases and purges the oil of gases and vapors. Therefore, the use of gas ballast reduces oil degradation and pump corrosion.Low Noise Levels: The EM pumps maintain Edwardss reputation for quiet operation pumps with a typical noise level of 70 dB(A).Pumping Systems: The EM pumps, with suitable accessories, can partner a variety of other types of pump in vacuum systems for industry and for research. A special feature of the E2M80 is the central vacuum inlet which enables you to fit a mechanical booster pump with a minimum overhang, to create compact combination pumping systems.Easy Maintenance: The advanced lubrication system allows the EM pumps to work with wide oil level tolerances, which reduce the need to top-up the oil.All EM pumps are constructed with internal dowels, which reduce the need for skilled setting of tolerances, when the pump is dismantled. The pumps are designed so that all key components are easily accessible. The exhaust valve seals and oil distributor seals are exposed after the top cover is removed. The shaft seal can be replaced quickly without stripping down the pump. Applications Vacuum metallurgy processes Thin film coating technologies Pharmaceutical freeze drying Refrigeration and air conditioning system evacuation, drying, and backfilling Transformer and cable drying and impregnation, insulating oil treatment plant Lamp manufacture Cryogenic vessel evacuation Vacuum drying and distillation in chemical industries Semiconductor device manufacture Backing pump for high vacuum applications

    Read more

    $28,727.10

  • Edwards RV3 2.6 CFM Dual-Stage KF25 Vacuum Pump Edwards RV3 2.6 CFM Dual-Stage KF25 Vacuum Pump

    View options

    Edwards Edwards RV3 2.6 CFM Dual-Stage KF25 Vacuum Pump

    Edwards RV3 2.6 CFM Dual-Stage KF25 Vacuum Pump Free KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included for immediately use (mist filter NOT included). Technical support and one year warranty covered by Edwards. https://shop.edwardsvacuum.com/products/a65201903/view.aspx Overview The Edwards RV series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. With 400,000  units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. Technology All our RV pumps are quiet.  Noise levels of 48 dBA 50Hz have been achieved by extensive work on the pump design,  drive train and motor.The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.In high vacuum mode, the RV pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications. Features High reliability – generous lubrication of moving parts. Safe process and systems – fast acting inlet valve for best in class anti‑suck back protection. Configured to meet your vacuum needs – mode selector and three position gas ballast No unplanned downtime – designed for easy maintenance. Better work environment – quiet running and intrusive frequencies minimised. Three position gas ballast allows either 60 g/hr or a class leading 220 g/hr (290 g/hr on RV12) of water vapour to be handled. Universal motor to cover the widest possible voltage and frequency range from a single variant. Smooth controlled inlet valve opening by oil pressure to eliminate pressure surges. Rapid closing inlet valve within 0.4 seconds of pump stopping. Applications Analytical instruments Centrifuges, ultra-high speed Coating Degassing/curing - oil, epoxy resin Distillation/extraction/filtration Freeze drying Furnaces Gas bottle filling/emptying Gel drying Glove boxes, ovens Laboratory bench top vacuum Leak detectors, Helium Load locks and transfer chambers Refrigeration manufacture Research and development Rotary, centirfugal evaporators Scanning electron microscopes - SEM SEM/FIB (ion beam repair) Solvent recovery Surface science instruments Turbomolecuar backing pumps  

    Read more

    $6,115.08 - $7,033.55

    View options

  • SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Magnetic Hotplate, ceramic-glass plate, 110V, 50/60Hz US Plug SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Magnetic Hotplate, ceramic-glass plate, 110V, 50/60Hz US Plug

    Scilogex SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Magnetic Hotplate, ceramic-glass plate, 110V, 50/60Hz US Plug

    SCILOGEX SCI500H-Pro LCD Digital 10x10 Hotplate, 500°C Max SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Hotplate Features LCD screen shows temperature, Max. temperature up to 500°C 10-inch glass ceramic work plate provides excellent chemical-resistant performance and most efficient heat transfer External temperature control is possible by connecting the temperature sensor (PT 1000) with an accuracy at ±0.2°C The "Hot" warning will flash if the work plate temperature is above 50°C even when the hotplate is turned off Heating temperature: room temperature ~500°C The included SD Card can record the instrument's running data in real time. Timing function: the heat time can be easily set. SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Hotplate Specifications   Work plate Dimension[WxD] 254x254mm(10 x 10inch) Work plate material Glass ceramic Heating Position 1 Heating temperature range Room temp. to 500°C, increments 1°C Temperature control accuracy ±1°C(<100°C)±1%(>100°C) Safety temperature 540°C Temperature,Time display LCD Timer function 1min to 99h59min Temperature display accuracy ±0.1°C External temperature sensor PT1000 (±0.2°C) "Hot" warning 50°C Protection class IP21 Power class 1400W Heating output 1350W Voltage Frequency 100-120/200-240V 50/60Hz Dimension[WxDxH] 328x424x138mm Weight 7.18kg Permissible Ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs SCI500H-Pro Manual​ Scilogex Hotplate & Stirrers Accessories

    Read more

    $1,317.99

  • SCILOGEX SCI550-H LED Digital 7 x 7 Square Hotplate, ceramic-glass plate, 110V, 50//60Hz, US Plug SCILOGEX SCI550-H LED Digital 7 x 7 Square Hotplate, ceramic-glass plate, 110V, 50//60Hz, US Plug

    Scilogex SCILOGEX SCI550-H LED Digital 7 x 7 Square Hotplate, ceramic-glass plate, 110V, 50//60Hz, US Plug

    SCILOGEX SCI550-H LED Digital 7x7 Hotplate, 550ºC Max Product Description The SCI550-H is one of the most technically advanced hotplates in the marketplace. Simply turn the heat button to set the desired temperature with the LED display and the actual real-time temperature is clearly displayed.  Product Features Easy-to-read LED display Ceramic-Glass plate Hot warning above 50°C Accessories available including PT1000 external sensor and reaction blocks cTUVus approved for UL and CSA  2 YEAR WARRANTY Product Specifications   Hotplate MODEL SCI550-H Temp range Ambient - 550°C Temp accuracy at plate ±10°C Temp control accuracy with PT- 1000 Sensor ±1°C Temp increments 5°C Heat output 1000W Heating rate (1 liter water) 6K/min Heat display LED Plate size 7 x 7 in. Plate material Ceramic-Glass Dimensions 14"L x 8.5"W x 4.5"H Weight 11lbs Voltage 110Volts 60Hz   Additional Resources and Information Downloadable PDFs Scilogex SCI550-H Manual  Scilogex Hotplates & Stirrers Brochure​ Scilogex Hotplate & Stirrers Accessories

    Read more

    $828.90

  • SCILOGEX SCI380H-Pro LCD Digital 5.5 x 5.5 in. Hotplate, ceramic plate, 110V, 50/60Hz US Plug

    Scilogex SCILOGEX SCI380H-Pro LCD Digital 5.5 x 5.5 in. Hotplate, ceramic plate, 110V, 50/60Hz US Plug

    SCILOGEX SCI380H-Pro 5.5 x 5.5 in. LCD Digital Hotplate, 380ºC/1500rpm Max Product Description The new SCI380H-Pro Digital Hotplate is a very economically priced and ideal for accurate heating applications from ambient +5°C to 380°C. Product Features Easy to read backlit LCD display Ceramic plate for chemical resistance and easy clean Electronic speed control for constant speed even during changes in load Brushless DC motor cTUVus approved for UL and CSA 2 Year Warranty Product Specifications   Temp range Ambient +5 - 380°C Overheat protection 420°C Temp accuracy at plate ±1(100°C) Temp control accuracy of liquid using PT- 1000 Sensor ±1°C Temp increments 1°C Heat output 500W Power 510W Heating rate (1 liter water) 6K/min Speed display LCD (backlit) Protection class IP21 Plate size 5.5 x 5.5 in. Plate material Ceramic coated aluminum Dimensions 12.5"L x 7"W x 4.2"H Weight 5lbs Voltage 110Volts 60Hz, 510W   Additional Resources and Information Downloadable PDFs SCILOGEX SCI380HHotplate Manual SCILOGEX MagneticHotplate-Stirrers Brochure SCILOGEX HotplateStirrers & Accessories 

    Read more

    $494.78

  • SCILOGEX SCI500HS-Pro LCD Digital 10 x 10 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug SCILOGEX SCI500HS-Pro LCD Digital 10 x 10 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug

    View options

    Scilogex SCILOGEX SCI500HS-Pro LCD Digital 10 x 10 Magnetic Hotplate Stirrer, ceramic-glass plate, 110V, 50/60Hz US Plug

    SCILOGEX SCI500HS-Pro LCD Digital 10x10 Magnetic Hotplate Stirrer 500°C/1500rpm Max Product Features Large volume: Up to 30L of liquid on 10-inch hot plate with powerful magnetic stirring Glass ceramic work plate provides excellent chemical resistant performance and efficient heat transfer. LCD display for precise monitoring of speed and temperature. Liquid temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C. Digital speed control of 100~1500 rpm Max. heating plate temperature 500°C The "Hot" warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off. Free SD card records the instrument's running data in real time. Timing function: the run time of the instrument can be set. Product Specifications   Work plate dimension[W x D] 254x254mm(10inch) Work plate material Glass ceramic Motor type Brushless DC motor Stirring positions 1 Max. Stirring quantity, [H2O] 30L Max. Magnetic bar[length] 80mm Speed range 100-1500rpm resolution±1rpm Speed, Time, Temperature display LCD Timer display 1min-99h59min Heating Temperature range Room Temp. -500°C, increment 1°C Temperature control accuracy ±1°C(100°C) Overheating Protection(°C) 540 Temperature Display Accuracy ±0.1°C External temperature sensor PT1000 (accuracy ±0.2) "Hot" warning (°C) 50 Data Connector SD Card Protection Class IP21 Power 1400W Heating output (W) 1350W Voltage, Frequency 100-120/200-240V 50/60Hz Dimensions [WxDxH] 328x424x138mm Weight (kg) 7.18 Permissible Ambient Temperature and Humidity 5-40° C, 80%RH   Additional Resources and Information Downloadable PDFs SCI500HS-Pro Manual  Hotplate & Stirrers Accessories

    Read more

    $1,647.84 - $1,757.32

    View options

  • SCILOGEX SCI-PA LED Digital Circular Magnetic Stirrer, 110-240V, 50/60Hz, US Plug

    Scilogex SCILOGEX SCI-PA LED Digital Circular Magnetic Stirrer, 110-240V, 50/60Hz, US Plug

    SCILOGEX SCI-PA Circular-top LED Digital Magnetic Stirrer, 100-1500rpm SCILOGEX SCI-PA LED Digital Magnetic Stirrer, 110V 60Hz Product Features Easy-to-read LED displayDigital speed control within the range of 100-1500rpm Max. stirring quantity of H2O at 3LNylon+GF housing provides a great chemical resistance Electronic speed control for constant speed even during changes in loadNow with a brushless long life DC motorHigh magnetic adhesioncTUVus approved for UL and CSA2 YEAR WARRANTYThe SCI-PA Magnetic Stirrer is an economy LED digital stirrer for basic stirring applications. It is not recommend for any corrosive liquid mixing as the plate is made of ABS plastic.Product Specifications   Work plate dimensions (WXD) 135(5 inch)mm Work plate material ABS Motor type DC Motor Motor input power 5W Motor output power 3W Power 15W Voltage 100-120, 60Hz Stirring positions 1 Max. stirring quantity[H2O] 3L Max. magnetic bar[length] 50mm Speed range 100-1500rpm Speed display LED Protection class IP42 Dimension[WxDxH] 150×260×80mm Weight 1.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDF SCI-PA Manual​ Hotplate & Stirrers Brochure

    Read more

    $274.40

  • SCILOGEX SCI7-S Analog 7?? Square Plate Magnetic Stirrer, ceramic-glass plate 110V/60Hz, US Plug

    Scilogex SCILOGEX SCI7-S Analog 7?? Square Plate Magnetic Stirrer, ceramic-glass plate 110V/60Hz, US Plug

    SCILOGEX SCI7-S 7x7 Analog Magnetic Stirrer, 15-1500rpm SCILOGEX SCI7-S Analog Stirrer, with Ceramic-Glass plate, 110V 60Hz, US plug Product Features Ceramic-glass work plate provides excellent chemical resistance Speed range of 15-1500rpm Max. stirring quantity of H2O - 10L Electronic speed control for constant speed even during changes in load Maintenance free shaded pole motor for long life High magnetic adhesion cTUVus approved for UL and CSA 2 YEAR WARRANTY                                                                         Product Specifications   Work plate dimensions (WXD) 184x184mm(7 inch) Work plate material Glass ceramic Motor type Shaded pole motor Motor input power 15W Motor output power 1.5W Power 30W Voltage 100-120/200-240V,50/60Hz Stirring positions 1 Max. stirring quantity[H2O] 10L Max. magnetic bar[length] 80mm Speed range 100-1500rpm Speed display Scale Protection class IP21 Dimension[WxDxH] 215x360x112mm Weight 3.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs SCI7-S Manual SCILOGEX Hotplates &Stirrers Brochure

    Read more

    $618.47

  • 3/8" Insulon Vacuum Jacketed Hose, Low Pressure 3/8" Insulon Vacuum Jacketed Hose, Low Pressure

    View options

    Insulon 3/8" Insulon Vacuum Jacketed Hose, Low Pressure

    3/8 Insulon Vaccum Jacketed Hose, Low Pressure   Insulon vacuum jacketed hoses for cryogenic and high temperature applications from -270 to 900°C (-454 to 1652°F). High-performance thermal insulation helps fluid transfer systems improve efficiency, safety, and performance. Insulon Hose LP is engineered for low-pressure applications. Insulon Hose LP, 3/8″ ID has a maximum allowable working pressure of 72 psi (4.96 bar) at 23°C. Lengths from 2 to 66 feet.

    Read more

    $354.02 - $1,501.40

    View options

  • SCILOGEX SCI-PB Analog Circular Stirrer, 110-240V, 50/60Hz, US Plug

    Scilogex SCILOGEX SCI-PB Analog Circular Stirrer, 110-240V, 50/60Hz, US Plug

    SCILOGEX SCI-PB Circular-top Analog Magnetic Stirrer, 15-1500rpm SCILOGEX SCI-PB Analog Circular Stirrer, 110-220V, 50/60Hz, US plug Product Features  Electronic speed control for constant speed even during changes in load A wide range of 15-1500rpm Max. stirring quantity of H2O at 3L High magnetic adhesion Now with brushless long life DC motor cTUVus approved for UL and CSA  Nylon+GF housing provides a good performance of chemical resistance  2 YEAR WARRANTY The SCI-PB Magnetic Stirrer is an economy stirrer for basic stirring applications. It is not recommended for any corrosive liquid mixing as the plate is made of ABS plastic. Product Specifications   Work plate dimension[WXD] Φ135mm(5 inch) Work plate material ABS Motor type DC motor Motor input power 5W Motor output power 3W Power 10W Voltage 100-120V, 60Hz Stirring positions 1 Max. stirring quantity[H2O] 3L Max. magnetic bar[length] 50mm Speed range 0-1500rpm Speed display Scale Protection class IP42 Dimension[WxDxH] 150×260×80mm Weight 1.8kg Permissible ambient temperature and humidity 5-40°C, 80%RH   Additional Resources and Information Downloadable PDFs SCI-PB Manual​ Hotplates & Stirrers Brochure  

    Read more

    $223.22

You have seen 720 out of 748 products

Show more products

Stainless Steel Fittings, Triclamp Parts, Vacuum Pumps

Our stainless steel fittings and triclamp parts are precision-machined to ensure leak-free connections and secure assembly across a wide range of systems. Whether you're building a custom extractor or upgrading your current setup, these parts are engineered for strength and chemical resistance.

Need reliable vacuum power? Our selection of vacuum pumps includes oil-free and rotary vane models, delivering strong, steady suction for filtration, degassing, or vacuum oven operation. Beyond vacuum pumps, we also offer a variety of circulation pumps, recovery pumps, and the parts and filters you need to keep your pumps running smoothly.

Find the lab hardware you need to support safe, scalable, and repeatable extraction processes: all from a single trusted supplier.

Login

Forgot your password?

Don't have an account yet?
Create account