MAXTRAP50: -50°C Vacuum Cold Trap
- VendorCascade Sciences
Description
MAXTRAP50: -50°C Vacuum Cold Trap
There are numerous laboratory grade cold traps on the market and everyone agrees they are a best practice tool for preserving/extending vacuum pump life or the time between vacuum pump maintenance. Cascade’s MAXTRAP50 is not an ordinary lab-grade cold trap. Cascade has taken our extensive knowledge of vacuum best practices and integrated the features necessary for our customers with time-sensitive, high-throughput, production-focused vacuum purging or drying applications.
Complete System Includes:
- Cascade’s COLDWELL 304 Stainless Steel Trap – patent pending baffle system.
- 3 Quart Capacity (2839 mliters)
- Viton Gasket
- Labconco -50°C Refrigerated Base
- Green CFC / HFC Free Refrigerants
- KF-25 Inlet/Outlet, 1 each 4′ Connection Line with KF-25 flanges, clamps, centering ring
- Power Cord
- 3mm Neoprene Insulator Cap
- Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids
- Quality Made in USA
- 1 Year Warranty
MAXTRAP Tips:
Safety
At very cold temperatures, solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines.
Don’t Stop: Keep Processing while trap is being reclaimed, cleaned, refreshed
Cold traps can become full or the captured material freezes and blocks flow. For high moisture, outgassing, 24 hour processing/vacuum purging consider adding a second, spare COLDWELL trap.
The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted.
Quick Start Up Tips:
- Remove shipping foam from reservoir bottom prior to use
- Fill reservoir with 800ml (+/-3.5 cups) ethanol to marked line
- Monitor ethanol levels inside reservoir
- Allow at least 30 mins for trap to cool
- Keep side vents clear. Allow at least 4″ for airflow
- Monitor interior of stainless trap for clogging
- Short tube – attach to vacuum pump
- Tall tube – attach to vacuum oven
MAXTRAP50 Differences:
The key to quality cold trap performance is: time, surface area, and temperature.
Time: Most cold traps have very narrow inlets and outlets, slowing down your process. Not Cascade’s MAXTRAP50! Full KF25 inlet and outlet connections never reduce flow.
Surface Area: Most cold traps have glass or a smaller surface area to collect the matter your vacuum pump would otherwise ingest. Cascade’s MAXTRAP50 surface area is a patent pending series of filter baffles inside the COLDWELL stainless trap.
Temperature: Cascade’s MAXTRAP50 features the mechanically refrigerated system built in the USA by Thermo Scientific – a leader in laboratory equipment.
| Specifications | |
|---|---|
| Coldwell Stainless Trap | KF25 Inlet & Outlet |
| 3 Quart Capacity (2839 mliters) | |
| Viton Gasket | |
| Neoprene Insulator Cap | |
| Labconco -50°C Mechanical Base | 115V / 1ph / 3 AMP (60Hz) |
| Cord Included | |
| CFC / HCFC Free Refrigerants | |
| Dimensions | inches 13.5 W x 23.5 D x 12.0 H |
| cm 34.3 x 59.7 x 30.5 | |
| *Requires approximately 800ml (~ 3.5 cups) of transfer fluid (ethanol, glycol, cryo-cool fluids) |
|
| Connections | 1 each 4′ KF-25 flanged vacuum rated line |
| 1 each KF-25 Centering Ring | |
| 1 each KF-25 Clamp | |
| Weight | COLDWELL Stainless Trap: 14 lbs |
| Thermo Mechanical Base: 60 lbs | |
| Shipping Weight: 95 lbs | |
Additional Resources:
MAXTRAP50: -50°C Vacuum Cold Trap
- VendorCascade Sciences
SKU: CS-1901010008
$10,280.14
You will earn 10,280.14 points for this purchase.- Want it cheaper? Call us for a wholesale or processor discount. 331-281-0154
- Join Loyalty+ and save 10-15% *Select items
