MAXTRAP105 -105°C Vacuum Cold Trap, 120V
- VendorCascade Sciences
Description
MAXTRAP105 -105°C Vacuum Cold Trap, 120V
Cascade’s MAXTRAP105 is not an ordinary lab-grade cold trap. Cascade has integrated features necessary for time-sensitive, high-throughput, production-focused vacuum purging or drying applications.
MAXTRAP105 Cold Trap Includes:
- Cascade’s COLDWELL 304 Stainless Steel Trap Insert (Patent pending baffle system)
- 3 Quart Capacity (2839 ml)
- Viton Gasket for Vacuum Integrity
- Labconco -105°C Refrigerated Base
- Green CFC / HFC Free Refrigerants
- Power Cord
- 3mm Neoprene Insulator Cap
- Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids
- Quality Made in USA
- 1 Year Warranty
- Connection Lines and hardware: 4′ of 1″ Diameter Vacuum Tubing with KF-25 Flanges on each side. KF-25 clamps, centering rings for the connection tube
MAXTRAP Tips:
Safety
At very cold temperatures, solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines.
Don’t Stop: Keep Processing while trap is being reclaimed, cleaned, refreshed
Cold traps can become full or the captured material freezes and blocks flow. For high moisture, outgassing, 24 hour processing/vacuum purging consider adding a second, spare COLDWELL trap.
The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted.
Quick Start Up Tips:
- Remove shipping foam from reservoir bottom prior to use
- Fill reservoir with 800ml (+/-3.5 cups) ethanol to marked line
- Monitor ethanol levels inside reservoir
- Allow at least 30 mins for trap to cool
- Keep side vents clear. Allow at least 4″ for airflow
- Monitor interior of stainless trap for clogging
- Short tube – attach to vacuum pump
- Tall tube – attach to vacuum oven
MAXTRAP105 Differences:
The key to quality cold trap performance is: time, surface area, and temperature.
Time: Most cold traps have very narrow inlets and outlets, slowing down your process. Not Cascade’s MAXTRAP105! Full KF25 inlet and outlet connections never reduce flow.
Surface Area: Most cold traps have glass or a smaller surface area to collect the matter your vacuum pump would otherwise ingest. Cascade’s MAXTRAP105 surface area is a patent pending series of filter baffles inside the COLDWELL stainless trap.
| Specifications | |
|---|---|
| Coldwell Stainless Trap | KF25 Inlet & Outlet |
| 3 Quart Capacity (2839 mliters) | |
| Viton Gasket | |
| Neoprene Insulator Cap | |
| Labconco -105°C Mechanical Base | 115V / 1ph / 3 AMP (60Hz) |
| Cord Included | |
| CFC / HCFC Free Refrigerants | |
| Dimensions | inches 24.1 W x 23.9 D x 12.6 H |
| cm 34.3 x 59.7 x 30.5 | |
| *Requires approximately 800ml (~ 3.5 cups) of transfer fluid (ethanol, glycol, cryo-cool fluids) |
|
| Connections | 1 each 4′ KF-25 flanged vacuum rated line |
| 1 each KF-25 Centering Ring | |
| 1 each KF-25 Clamp | |
| Weight | COLDWELL Stainless Trap: 14 lbs |
| Mechanical Base: 139 lbs | |
| Shipping Weight: 190 lbs | |
Additional Resources:
MAXTRAP105 -105°C Vacuum Cold Trap, 120V
- VendorCascade Sciences
SKU: CS-1901010007
$14,119.16
You will earn 14,119.16 points for this purchase.- Want it cheaper? Call us for a wholesale or processor discount. 331-281-0154
- Join Loyalty+ and save 10-15% *Select items
