***Note: Butane(Solvent) not included with systems unless ordered with dropdown menu or separately. Any order with butane WILL NOT SHIP EXPEDITED.
DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. Check with your local fire marshal for guidance when operating indoors
2lb Closed Loop Reclamation Extraction System
(System comes with 1 yr. limited warranty)
The 2lb closed loop hydrocarbon extraction system performs botanical extraction within a sealed, vacuumed system. Utilizing a top-fill input, solvent washes thru the material column, collecting oils as it passes over the material. Oil bearing solvent is collected in the collection base under the material column. Once collected, solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.
Explorer: Our standard, most economical setup, perfect for the entry level extractor on a budget. Comes with a welded bottom base and standard LP tank. This model has minimal features to keep cost low, while providing the necessary equipment to get the job done.
Professional: This model features upgrades to help produce a higher quality extract. Solvent is input into the material column with a showerhead endcap, ensuring the full material column is saturated with solvent. The Professional comes with a sleeved spool, allowing users to utilize dry ice to freeze the material column. This will help lock in fats and waxes to the material. An inline ball valve is used to allow solvent to be suspended in the material column, as well as closing the collection base off during recovery. Upon completion of the run, extract removal is made simple by adding a removable bottom to the collection base.
Elite: The Elite series is our fully upgraded Apollo model. The elite series adds a level of dependability needed for those seeking to produce the highest quality extracts. It features a larger bore on valves and hoses, all American made instrumentation valves by SSP, an AVCO ultra-low temperature inline ball valve, sleeved dewaxing column, jacketed collection base, and a stainless steel LP tank. The Elite series boasts increased efficiency on both solvent input and recovery by bumping up all valves and lines to 3/8” JIC. The stainless steel LP tank is able to be opened and cleaned, making solvent contamination a non-issue. The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base. This method keeps temperature both accurate and consistent. *NOTE* This model requires a heater circulator or chiller
Explorer
Professional
Elite
BVV 316SS Full Bore Valves
Welded Bottom Base
BVV 316SS Full Bore Valves
Showerhead
Dewaxer
Ball Valve
Splatter Platter Base
SSP Valves
Showerhead
Dewaxer
AVCO Ball Valve
HP Clamps
Jacketed Base/Platter
SSLP
3/8" Valves & Hoses
Unit Includes:
Collection Base
10"x10" Welded Bottom Base
Assembled 10" extractor lid
3"x36" Material column with reducer & top cap
#30 LP tank
60" High Pressure PTFE Braided SS Hose
10" clamp, (2)3" clamps and a 1.5" clamp with gaskets
Instruction Manual
Specifications:
3"x 36" 304 Stainless Steel Material Tube 2lb (900g)
Multiple port connections for _" 316 Stainless JIC 37 Degree
304 Stainless Steel Base Container 10" diameter by 10" tall
Tri-Clamps at all interfaces make for a high pressure, easy clean unit.
Viton Gaskets are designed for Oil Processing Temp range -40-200F
Dimensions (Inches): 55" x 10" Diameter overall size
Weight: 38 lbs.
Operating Temperature Range: -40F to 160F
Ultimate Vacuum: as low as 10 Microns
Base unit Maximum Capacity: 785 cubic inches, (12.8704 Liters)
Construction: All components made of 304 Stainless Steel.
Max Vacuum -29.9inHg
High Polish Interior
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Cylinder Volume
Select Material
How Much Will Fit in Cylinder
Formula Volume x Weight of Water x Specific Gravity
Constants Weight of Water = 0.0360 (lbs / in3) Specific Gravity of =
***Note: Butane(Solvent) not included with systems unless ordered with dropdown menu or separately. Any order with butane WILL NOT SHIP EXPEDITED.
DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well ventilated areas. Check with your local fire marshal for guidance when operating indoors
2lb Closed Loop Reclamation Extraction System
(System comes with 1 yr. limited warranty)
The 2lb closed loop hydrocarbon extraction system performs botanical extraction within a sealed, vacuumed system. Utilizing a top-fill input, solvent washes thru the material column, collecting oils as it passes over the material. Oil bearing solvent is collected in the collection base under the material column. Once collected, solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.
Explorer: Our standard, most economical setup, perfect for the entry level extractor on a budget. Comes with a welded bottom base and standard LP tank. This model has minimal features to keep cost low, while providing the necessary equipment to get the job done.
Professional: This model features upgrades to help produce a higher quality extract. Solvent is input into the material column with a showerhead endcap, ensuring the full material column is saturated with solvent. The Professional comes with a sleeved spool, allowing users to utilize dry ice to freeze the material column. This will help lock in fats and waxes to the material. An inline ball valve is used to allow solvent to be suspended in the material column, as well as closing the collection base off during recovery. Upon completion of the run, extract removal is made simple by adding a removable bottom to the collection base.
Elite: The Elite series is our fully upgraded Apollo model. The elite series adds a level of dependability needed for those seeking to produce the highest quality extracts. It features a larger bore on valves and hoses, all American made instrumentation valves by SSP, an AVCO ultra-low temperature inline ball valve, sleeved dewaxing column, jacketed collection base, and a stainless steel LP tank. The Elite series boasts increased efficiency on both solvent input and recovery by bumping up all valves and lines to 3/8” JIC. The stainless steel LP tank is able to be opened and cleaned, making solvent contamination a non-issue. The jacketed collection gives precision during recovery, allowing a heated fluid to be circulated around the base. This method keeps temperature both accurate and consistent. *NOTE* This model requires a heater circulator or chiller
Explorer
Professional
Elite
BVV 316SS Full Bore Valves
Welded Bottom Base
BVV 316SS Full Bore Valves
Showerhead
Dewaxer
Ball Valve
Splatter Platter Base
SSP Valves
Showerhead
Dewaxer
AVCO Ball Valve
HP Clamps
Jacketed Base/Platter
SSLP
3/8" Valves & Hoses
Unit Includes:
Collection Base
10"x10" Welded Bottom Base
Assembled 10" extractor lid
3"x36" Material column with reducer & top cap
#30 LP tank
60" High Pressure PTFE Braided SS Hose
10" clamp, (2)3" clamps and a 1.5" clamp with gaskets
Instruction Manual
Specifications:
3"x 36" 304 Stainless Steel Material Tube 2lb (900g)
Multiple port connections for _" 316 Stainless JIC 37 Degree
304 Stainless Steel Base Container 10" diameter by 10" tall
Tri-Clamps at all interfaces make for a high pressure, easy clean unit.
Viton Gaskets are designed for Oil Processing Temp range -40-200F
Dimensions (Inches): 55" x 10" Diameter overall size
Weight: 38 lbs.
Operating Temperature Range: -40F to 160F
Ultimate Vacuum: as low as 10 Microns
Base unit Maximum Capacity: 785 cubic inches, (12.8704 Liters)
Construction: All components made of 304 Stainless Steel.
Max Vacuum -29.9inHg
High Polish Interior
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Cylinder Volume
Select Material
How Much Will Fit in Cylinder
Formula Volume x Weight of Water x Specific Gravity
Constants Weight of Water = 0.0360 (lbs / in3) Specific Gravity of =
