Description 1LB Top Fill Closed Loop Extraction System The 1lb closed loop hydrocarbon extractor performs incredible botanical extraction within a sealed, vacuumed system. With the help of a top-fill input, solvent washes through the material column, collecting oils as it passes over the material. The oil-bearing solvent is collected in the collection base under the material column. Once collected, the solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.
***Note: Solvent not included with systems unless ordered separately. Any order with butane WILL NOT SHIP EXPEDITED.***
***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.
KEY BENEFITS
Meets or exceeds all industry listed standards Versatile in running butane, propane, and other blended solvents Perfect for mid to large-scale extraction /production facilities Faster run times and less degradation in the process
VIDEO
VIDEO
Extractor Configuration:
Explorer: Our standard, most economical setup, perfect for the entry level extractor on a budget. Comes with a welded bottom base and standard LP tank. This model has minimal features to keep cost low, while providing the necessary equipment to get the job done.
Professional: This model features upgrades to help produce a higher quality extract. Solvent is input into the material column with a showerhead endcap, ensuring the full material column is saturated with solvent. The Professional comes with a sleeved spool, allowing users to utilize dry ice to freeze the material column. This will help lock in fats and waxes to the material. An inline ball valve is used to allow solvent to be suspended in the material column, as well as closing the collection base off during recovery. Upon completion of the run, extract removal is made simple by adding a removable bottom to the collection base.
Compression: *NOTE* This model requires a heater circulator or chiller
Explorer Professional Compression
BVV 316SS Full Bore Valves
BVV 316SS Full Bore Valves
Compression Valves
Welded Bottom Base
Showerhead
3/8" Valves & Hoses
Dewaxer
HP Clamps
Ball Valve
Ball Valve
Splatter Platter Base
Jacketed Base/Platter
SSLP
Unit Includes:
6"x6" Welded Bottom Base
6"x6" Open Spool
Assembled 6" extractor lid 3"x24" Material column with reducer & top cap Mastercool 6LB Solvent Recovery Tank (1) 1/4" 48" FJIC Stainless Steel hose (1) 1/4" 60" FJIC Stainless Steel hose (1) 1/4" FJIC HVAC hose Standard pressure single pin clamp Instruction Manual
Specifications:
3"x 24" 304 Stainless Steel Material Column-1lb capacity (450g)
316 Stainless Steel Fully Encapsulated Miniature Ball Valves
System Rated to 150PSI Multiple 37 degree FJIC port connections 304 Stainless Steel Base Container 6" diameter by 12" tall Tri-Clamps at all interfaces make for a high pressure/standard pressure, easy clean unit BUNA-N Gaskets are designed for Oil Processing Temp range -40-200F, and have superior solvent resistance Base unit Maximum Capacity: 395 cubic inches, (6.472 Liters) Construction: All components made of 304 Stainless Steel. Max Vacuum -29.9inHg High Polish Interior
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Material Capacity
Cylinder Volume
Triclamp Spool (in)
1.5"
2"
3"
4"
6"
8"
10"
12"
Length (in)
1"
2"
3"
4"
6"
8"
10"
12"
18"
24"
36"
48"
Volume (in3 )
How Much
Formula
How Much Material Will Fit in the Cylinder
Packing Density (g)
2.5
3
3.5
4.3
Grams of Material
Lbs. of Material
