Shop Components
Quick Disconnect - Fractional Tube Fitting - STEM
SSP Quick Disconnect - Fractional Tube Fitting - STEM SSP Instrumentation Flolok® Quick Connects are designed to provide a convenient way to connect and disconnect fluid lines, creating a leak-tight seal without the use of tools. Features: Viton® (Fluorocarbon FKM Rubber) O-Rings Provide Leak Tight Sealing DESO (Double End Shut Off) design Push to connect means no tools required Pressures up to 3000 psig Specifications Material 316 Stainless Steel Pressure Rating 3000 PSIG Connection Type 1 Body - Shut Off Connection Size 1 Specified by User Connection Type 2 Female NPT Connection Size 2 Specified by User Connects Body to Male NPT O-Ring Material Viton®(FKM) SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$66.69 - $105.01
BVV/CPS 1/4" FNPT Vacuum Pump Exhaust Adapter
BVV/CPS 1/4" FNPT Vacuum Pump Exhaust Adapter This fitting allows the user to connect a 1/4" NPT fitting to the exhaust for the desired application such as a carbon exhaust filter. It is made of steel and comes with a Viton O-ring.
$28.38
CMEP-OL High-Pressure Gauge
CMEP-OL High-Pressure Gauge This is a replacement High-Pressure Gauge for the CMEP-OL recovery pump. Gauge readout is: (-30)-0-(800) PSI.
$35.48
BVV™ Glass Cold Trap - Ribbed (Made in USA)
BVV™ Glass Cold Trap - Ribbed This dewar style glass is designed to increase surface area for maximum vapor condensation and it also has 24/40 or 34/45 jointed connections to increase vapor flow. Note: The bottom joint will always be 24/40. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.
$1,121.02
Carbon Exhaust Filter with KF25 Connections
Carbon Exhaust Filter for Vacuum Pumps Replaces Koby Junior (US Patent# 3169112A) This filter will adsorb contaminants such as oil aerosols, oil vapors, certain other hydrocarbon vapors, and trace moisture. They also trap all foreign solid particles and bacteria down to 0.5 microns in size. Key Features: Purifies Exhaust Gases from Vacuum Pumps Up to 19 CFM 0.5 Micron Filtration levels. Helps Maintain Safe Working Environment Adsorbs Organic Vapors and Small Particles High-Efficiency Filtration Minimal Pressure Drop Maintenance Free - Completely Disposable Pressure Safe to 90 PSI KF25 Stainless Steel Connection Filter connections 1/4" NPT Pipe Fitting Connections Removes the following contaminants: Oil Mist Oil Aerosols Oil Vapors Hydrocarbon Vapors Moisture Droplets Dust Pipe Scale Rust Fine Particles Odors Organic Aerosols Other Foreign Matter Lifespan: 720 hrs. of continuous operation. (Then a replacement is recommended) *NOTE PUMP NOT INCLUDED*
$163.19
1" ID Heavy Wall Spiral Wire Reinforced Clear PVC Vacuum Hose
1" ID Heavy Wall Spiral Wire Reinforced Clear PVC Vacuum Hose Crystal clear Phthalate Free PVC compound, formulated with ingredients in compliance with applicable FDA requirements, meets USDA, 3A, NSF, UL, RoHS and USP Class VI criteria. Reinforced with spiraled polyester yarn and longitudinal orange tracer yarns for identification. Key Features: Constructed with Phthalate Free compounds. NSF-51 certified material. Crystal clear - allows visual confirmation of product flow. Longitudinally reinforced to reduce elongation under pressure. Light weight. Self-extinguishing. Non-marking. Silicone-free. Non-conductive. One-piece lengths. Resistant to chemicals (see chemical-resistance chart). Compound hardness 73 ±3 Shore "A". Phthalate Free! Common Applications: Food & beverage dispensing. Deionized water. Liquid food products. Air and water lines. Powdered food products. Potable water transfer. Air breathing lines. Pneumatic lines. Packaging machines. Specifications Series K7130 Sized Code 16 Service Temperature Range 25 to 150°F (-4 to 65°C) Nominal ID 1" (25.4mm) Nominal OD 1.375" (34.9mm) Max Working Pressure @ 70°F (20°C) 100 Psi Max Working Pressure @ 122°F (50°C) 50 Psi Standard Length Coils 100ft Approx. Wt. per Pkg. 44lb Brand Kuri Tec® Packaging Coils Material PVC Min. Bend Radius @ 70°F 1" Type Reinforced Water Supply and Food Grade Hose Reinforcement Material Helically-wound spring steel wire Color Crystal Clear Weight per Foot 0.44lbs/ft Performance Heavy Wall Clear PVC wire reinforced for vacuum
$56.76 - $567.60
Bullseye Precision Gauge | Portable Vacuum Gauge | .001 to 2 Torr Accuracy
Bullseye Precision Gauge | Portable Vacuum Gauge | .001 to 2 Torr Accuracy The Bullseye Precision Gauge is the ideal portable vacuum gauge to serve many applications. This patented vacuum gauge offers Graphical Displays and graphics supporting real-time analytics (Leak, Pump, Outgas, Stable) Visual graphing feature right on the display Display pinpoints the root of the problem so you get it right the first time Put it anywhere with its magnet and kickstand Options: Rugged carrying case designed for instrument, back-up sensor and these adapters that can change the NPT to a KF25 or KF16 vacuum interface adapters Sensor (Probe) Replacements: This gauge is paired with the Thermocouple Plus/531 Equivalent Sensor, but works with Agilent 531 or 536 sensors as well if you are looking for a more robust sensor option Numeric & Graphical Displays See vacuum readings in either numbers or easy-to-read graphs Calibrated & Precise Delivered pretested and calibrated with thermocouple sensor under actual vacuum against a NIST standard. Extended Battery Lifespan Solid state electronics are built into the Bullseye Precision Gauge. The portable vacuum gauge operates using AA batteries and lasts 70 hours. Applications Vacuum pump monitoring, vacuum pump testing, baseline vacuum pump performance, & transformer dry-out, distillation monitoring Bullseye Precision Gauge Accuracy Remember to choose your vacuum gauge that gives you the accuracy you need for your application. This Bullseye comes with a thermocouple sensor, which has better accuracy in the millitorr up to 6 Torr. If you need your Bullseye Gauge to have CE rating then choose either the Bullseye with 531 or Bullseye with 536 KF25 1 to 99 millitorr +/- 2 millitorr or 20% 100 to 2000 millitorr +/- 10% 2 to 6 Torr +/- 25% Above 6 Torr Continuous and monotonic (increasing reading indicates increasing pressure) Units Torr, mbar, bar, kPa, inHg, mm Hg, millitorr, microns, inches of water, PSI, Pa Control Range 1E-4 – 1000 Torr Range with Accuracy .001 – 5 Torr Sensor Type SEN-VGT500, Thermocouple Plus Dimensions 6.2”H x 3.7”W x 1.3”D Certifications ROHS and CE
$752.08
1.5" x 1" x 1/4" MNPT Terp Conical Reducer
1.5" x 1" x 1/4" MNPT Terp Conical Reducer This Terp conical reducer has a 1.5" Triclamp connection with a 1" Triclamp (fits 1.5" Triclamp) and a 1/4" MNPT port that allows the user to input a valve or a manifold to the reducer and inject solvent into the system.
$28.38
BVV™ Ultrasonic Cleaners
BVV™ Ultrasonic cleaners are the industry standard for lab and industrial grade applications and are made out of high quality stainless steel. Ultrasonic cleaning uses cavitation bubbles induced by high frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses. The intention is to thoroughly remove all traces of contamination tightly adhering or embedded onto solid surfaces. Water or solvents can be used, depending on the type of contamination and the workpiece. Contaminants can include dust, dirt, oil, pigments, rust, grease, algae, fungus, bacteria, lime scale, polishing compounds, flux agents, fingerprints, soot wax and mold release agents, biological soil like blood, and so on. Ultrasonic cleaning can be used for a wide range of workpiece shapes, sizes and materials, and may not require the part to be disassembled prior to cleaning. Specifications Model LS-30L IS-77L IS-264L Material Stainless Steel Stainless Steel Stainless Steel Reservoir Capacity 30L (7.9 gal) 77L (20.3 gal) 264L (70 gal) Exterior Dimensions 13" x 22" x 13-1/4" 23-1/2" x 31.5" x 32-1/8" 35" x 55-1/2" x 36" Weight 22lbs 130lbs 250lbs Reservoir Dimensions 11.5" x 19.5" x 7-3/4" 15-5/8" x 21.5" x 13-3/4" 23.5" x 31-3/8" x 21.5" Tray Dimensions 9-5/8" x 17.5" x 5" 18-7/8" x 14-1/8" x 7-1/2" 21-3/4" x 28.5" x 9-3/4" Ultra Sonic Power 600w 1200w 3000w Heating Power 500w 3000w 6000w Voltage 110v/60Hz 110v/60Hz 220v/60Hz 3 Phase Casters No (Rubber Feet) Yes (Locking) Yes (Locking)
$979.12 - $6,598.40
TRS21 & BVV Butane Recovery Pump Valve Rebuild Kit
This is the complete valve rebuild kit for the cylinder head on the BVV Recovery pumps or the TRS21. This is only for 2 pistons. So if you have the BVV 4 Cylinder pump you would need two kits. These gaskets are upgraded and are compatible with butane and propane gasses, all the O-ring seals in this kit are Viton
$127.71
BVV Compression Connection Hemispherical Reducers
BVV Compression Connection Hemispherical Reducers BVV Compression Connection Hemispherical Reducers allow the user to connect differently sized Tri-Clamp parts with compression connection fittings to each other without adding to the overall size of your extraction system. These reducers are offered in Tri-clamp x Female or Male 3/8" Compression Connections. Specifications: Material: 304 Stainless Steel High Polish Interior Standard: 3A Connection Types: Tri-Clamp x Female or Male 3/8" Compression Connections
$70.95 - $134.81
10" Pre-Built Hemispherical Lid with BVV 316SS Full Bore Valves
10" Pre-Built Hemispherical Lid with BVV 316SS Full Bore Valves (This Lid is fully assembled and Nitrogen Tested for Leaks at Best Value Vacs) This 10" Best Value Vacs Hemispherical lid is fully assembled and nitrogen tested for leaks at our warehouse. This lid comes with 2 BVV 316SS Full Bore Valves with 1/4" 37° JIC Flares, compound gauge and the 4th hole is plugged to allow for future expansion. These lids are made out of 304 stainless steel and have (1) 1.5" and (2) 2" Tri-Clamp ports with the middle 1.5" port having an extended tube to control solvent flow. Key Features: Pre-built and Nitrogen Tested for Leaks BVV 316SS Full Bore Valves with 1/4" 37° JIC -40F to 450F 304 High Polish Stainless Steel Compound Gauge (-30)-0-(150PSI) Specifications Lid Material 304 Stainless Steel Valve Material 316SS Full Encapsulated PTFE Core - 1/4 Turn Flare Size (2)1/4" 37° JIC Tri-Clamp Size(s) (1) 1.5" Ports x (2) 2" x 10" Tri-Clamp Nitrogen Tested Yes
$468.27
4 Port Glass Vacuum Manifold with PTFE Stopcocks
4 Port Glass Vacuum Manifold with PTFE Stopcocks General purpose single bank vacuum manifold with 4 ports. The main tube is 1" OD with a serrated hose barb connection. Ports are 4mm PTFE stopcocks with serrated hose barb connections. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$227.04
BVV Certified Extractor Gauge (-30) - 350 PSI
Certified Extractor Gauge (-30) - 350 PSI BVV™ Extractor Gauge has a 1/4" MNPT stainless steel connection with a readout of (-30)-0-350 PSI. Use a compound gauge when measuring a system that is pushing both positive and negative pressure on the gauge. Certified for use (-40°F - 120°F)
$63.86
37° AN Union
SSP - 37° AN Union SSP Instrumentation Duolok® tube fittings are designed, manufactured and quality controlled to be totally “interchangeable” with the Swagelok® brand of tube fittings. Component by component examination plainly shows the two brands as completely “componentintermixable.” The precision manufacturing of both products to stringent tolerances under rigid quality control procedures ensures the safety, performance, and reliability of service whenever Duolok® and Swagelok® component parts are mixed and used in accordance with published installation and service recommendations. 100% USA Made Specifications: Connection Type 1 Duolok Tube Fitting Connection Size 1 Specified by User Connection Type 2 Male 37° AN Flare Connection Size 2 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Duolok Pressure Rating = Tubing Rating SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$25.54 - $28.38
BVV Valve and Gauge Adapter
This valve and gauge adapter allows the user to thread on a gauge and valve to a system or a solvent tank without the need of Teflon tape. This adapter connects with a 1/4" 37-degree Female JIC connection to a 1/4" 37-degree Male JIC connection.
$92.24
300L 304SS Jacketed Collection and Storage Vessel with Locking Casters
300L 304SS Jacketed Collection and Storage Vessel with Locking Casters This massive 304 Stainless Steel Jacketed vessel can hold up to 300L of water (~80 gallons) and has a (3) 6" Tri-Clamp, (2) 1.5" Tri-Clamp/ Tri Clover and (1) 1/2" FNPT port on the top and a 6" Tri-Clamp port on the bottom of the vessel. The outer jacket has 2x 1/2" FNPT ports to allow the circulation of heat transfer fluids and can also be used a vacuum jacket and can hold 43L or 11.5 gallons of fluid in the outer jacket. This unit also features 4 stainless steel legs with locking casters to allow the vessel to be moved around easily. (Note: this unit comes bare and does not include any fittings besides the legs with casters.) Specifications Material 304 Stainless Steel Pressure Rating 100 PSI MAX Connection Type(s): (3) 6" Tri-Clamp Top Ports (2) 1.5" Tri-Clamp Top Ports (1) 6" Tri-Clamp Bottom Port (2) 1/2" FNPT Outer Jacket Ports (1) 1/2" FNPT Top Port ***Note: This item will ship via freight ONLY.
$4,966.54
1.5" x 19" x 3/8" FNPT Tri-Clamp Manifold
1.5" x 19" x 3/8" FNPT Tri-Clamp Manifold This Tri-Clamp/ Tri Clover manifold is made out of 304 stainless steel and has 2 1.5" Triclamp connections at each end and (6) 3/8" FNPT threaded ports along the length of the manifold. This allows the customer to adapt this manifold to any extraction system allowing for maximum flow of vapor through the manifold. Specifications Material 304 Stainless Steel Connection Size 1.5" Tri-Clamp 3/8" FNPT Length 19" Standard 3A High Polish
$149.00
Chemglass Thermometer Inlet Adapter 14/20 w/ #7 Thread
Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermo-meters or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon® compression cap and Viton o-ring. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$28.38
Master Vapor MVP150 Explosion Proof Recovery Pump
Master Vapor MVP Recovery Pump - 150 PSI (This item may carry up to a 2-4 week lead time) (This item is limited to a maximum of 10% discount during sales) The Master Vapor Pump Model MVP-150-1PH is a certified gas recovery pump designed to operate at 150 PSI. This pump is designed specifically for LP-Gas vapor recovery and is ideal for butane or butane / propane mixtures. Please note that the standard Single Phase and Three Phase models are UL Certified and that the ATEX Three Phase is CE Certified. Engineering Specifications: Recover LP-Gas vapor at OVER 6 CFM (cubic feet per minute). Recover butane at up to 1.5 LB/MIN (pounds per minute) Recover and recondense butane at OVER 18 GPH (gallons per hour) Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G Electric motor: 2 HP, 3600 RPM, 60 HZ. Pump speed: 220 CPM (cycles per minute) at 60 HZ. Size: 17.0” x 19.9” base x 46” tall Weight: 182.5 lb (82.8 kg) Motor Option: Model MVP-150-1PH : Single-phase: 115/208-230V, 20/10 FLA (full load amps) - UL Certification Model Model MVP-150-3PH : Three-phase: 208-230/460V, 5.2/2.6A FLA, Inverter-rated - UL Certification Compliance Details: Compliant with NFPA and UL standards for C1D1 motors and LPG vapor recovery Meets Class 1 Division 1 hazardous area facility requirements (when installed correctly) One year manufacturer’s warranty (see Operation Manual) Made in the USA Documentation: Product Manual Technical Data Sheet Features and Benefits sheet
$17,851.15
Apollo Extractor 1LB Upgrade Kit
This Kit Includes Everything needed to upgrade one of our Standard 90-270 gram units up to 1 lb. This Kit Includes the Following Items: Mastercool Green #15 Solvent Recovery Tank 3" x 24" SS304 Spool 3" x 1.5" Conical Reducer 6" x 6" SS304 Spool 3" Top Cap with BVV 316SS Full Bore Valve 6" Single Pin Clamp 6" Buna-N Tri-Clamp Gasket (2) 3" Single Pin Clamps (2) 3" Buna-N Tri-Clamp Gaskets
$439.89
L.J Star SSH Clamp Hardware
L.J Star SSH Series Clamp Hardware These are replacement bolts for L.J. Star SSH series High Pressure Clamps. It includes 1x Bolt, Brass Nut, and Lock Washer.
$38.31 - $69.53
BVV 24/40 Jointed - Flat Bottom Flask
BVV 24/40 Jointed - Flat Bottom Flask Single neck flat bottom flasks can be used for a variety of applications such as capturing and collecting material and also used for boiling off material through distillation. These flasks are single neck with a ground 24/40 joint and require the application of vacuum grease to the ground surface when using the flasks in a vacuum application. The flat bottom allows for the flask to be flat on a heat plate if needed. Sizes Available: 500ml - 24/40 Ground Joint / Flat Bottom OD 1.6" 1000ml - 24/40 Ground Joint / Flat Bottom OD 2" 2000ml - 24/40 Ground Joint / Flat Bottom OD 2.8" *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$21.29 - $41.15
Welch 1400 DuoSeal 0.9 cfm 0.1 Micron Belt Drive Dual-Stage Pump
The Welch 1400 DuoSeal is an ideal choice for short path distillation and other general laboratory applications due to it's extremely low vacuum capabilites. DuoSeal Vacuum Pumps are known for their ruggedness world-wide. These pumps have large oil reservoirs to dilute contaminants. Low pump rpm to reduce friction and wear while minimizing reservoir temperature to lessen chemical reactivity. Pump can be ordered with an optional exhaust filter to control oil mist. Key Features: High contamination tolerance Ultimate vacuum <0.001 Torr Low RPM for long service life Specifications: Applications: Vacuum Manifolds, Schlenk Lines, High boiling point evaporations, Glove boxes, General laboratory use Type: Belt-Drive Vacuum Pump Free Air Displacement cfm (l/min.) @60Hz: 0.9(25) Ultimate Pressure: 1 x 10-4(0.00013) Pump RPM: 580 Oil Capacity: 0.62(0.59) Motor Horespower (watts): 1/3(250) Adjustable Vac. / Gas Ballast: Yes Tubing Needed: 7/16(11) Intake Thread: 3/4-20 Exhaust Thread: 3/4-20 Overall Dimensions LxWxH in. (cm): 17.8x9x12.6 (45.1x32.1x31.8) Ship Weight: 70(31.8) Shipping Carton Dimensions: LxWxH in. (cm): 20.5x13.8x14.5 (52.1x35.1x36.8)
$3,262.31
Street Elbow
SSP - Street Elbow SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease, and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. Best Value Vacs recommends GAS PTFE Tape Specifications Connection Type 1 Female x Male NPT Connection Size 1 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 1/4" - 7750 3/8" - 6800 NPT Pressure Rating >10,000PSI ASME B31.3 SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$22.70
KF-25 X 1" Stainless Steel Hose Barb
KF-25 X 1" Stainless Steel Hose Barb This is a KF-25 (NW25) x 1" Stainless Steel Hose Barb to adapter flexible vacuum tubing to the system made out of 304 stainless steel.
$38.31
AFS 4" Tri-Clamp Inline Filter Housing for Disposable Color Remediation Cartridges
AFS Tri-Clamp Inline Filter Housing for Disposable Color Remediation Cartridges Note: Disposable cartridges sold separately. (Click Here for Cartridges) This inline housing allows for implementation of the AFS filters into many extraction systems. The AFS filter housing is 4" but comes with the adapter flanges for both ends to go inline with a standard 2" tri-clamp system. Kit Includes 2x 4" High Pressure Clamps 1x 4" Buna-N Gasket 2x Flat Reducers 4" to 2" Tri-Clamp 1x Cartridge Housing AFS Instruction Manual Download Here AFS SDS Sheet
$283.80 - $297.99
Threaded Lab Stand Rod
Stainless Steel Threaded Rod 10 x 1.5mm Thread, 10mm Diameter rod, and is 24" in length and can be used as extra lattice supports in a any application.
$14.19 - $21.29
Quick Disconnect - Fractional Tube Fitting - BODY
SSP Quick Disconnect - Fractional Tube Fitting - BODY SSP Instrumentation Flolok® Quick Connects are designed to provide a convenient way to connect and disconnect fluid lines, creating a leak-tight seal without the use of tools. Features: Viton® (Fluorocarbon FKM Rubber) O-Rings Provide Leak Tight Sealing DESO (Double End Shut Off) design Push to connect means no tools required Pressures up to 3000 psig Specifications Material 316 Stainless Steel Pressure Rating 3000 PSIG Connection Type 1 Body - Shut Off Connection Size 1 Specified by User Connection Type 2 Duolok Tube Fitting Connection Size 2 Specified by User Connects Stem to Tube O-Ring Material Viton®(FKM) SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$85.14 - $103.59
1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner
1.5" Tri-Clamp Stainless Steel Braided Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications. They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE. The inner core is corrugated PTFE to optimize the flexibility, protected by a braided stainless steel outer sleeve. These hoses have 1.5" Tri Clamp flanges on each end. ***Note: Do not exceed the specified hose bend radius or the inner PTFE liner will kink and the hose integrity will become compromised and should not be used. The 24" version can only bend 90 degrees. Specifications: Connection Type(s): 1.5" Tri-Clamp Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Flange Material 304 Stainless Steel Temperature Rating -65° to 450°F Pressure Rating 580 PSI Chemical Resistance Excellent Bend Radius (24" Length) 13" (48", 72", 96" Length) 5.5"
$283.80 - $553.41
TRS21 Upgraded Cylinder Replacement Kit, w/Shims Fits BVV4CYL & BVV2CYL
BVV-6 Included in this kit: (2x) Anodized Aluminum Cylinders and Viton Gaskets, Plus 6 shims (2x .004" and 2x .002") use for top dead center adjustment of the cylinders to dial in the displacement (recommended displacement .008"). This upgrade kit can be used for the following recovery pumps: CPS TRS21 Anti-spark/explosion pump (including the SS model from BVV) BVV 2 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified BVV 4 Cylinder Butane Recovery Pump ITS/ETL to ANSI/ISA Certified - Requires 2 kits because this unit has 4 cylinders. BVV 4 Cyl & 2 Cyl Pump Seal Rebuild Instructions
$181.63
Adapter
SSP - Adapter SSP Instrumentation TruFit® is manufactured from fully-traceable raw material to close tolerances and superior surface finishes. TruFit® provides optimal performance when installed in accordance with SSP’s recommendations and the design parameters appropriate for each type of connection – tapered thread, straight thread, and weld & braze. TruFit® components are cleaned in accordance with SSP documented work instructions using equipment calibrated to NIST standards with environmentally-safe and stable agents, ultrasonics, and heat/ temperature to remove all residual oil, grease, and loose particles. Stainless steel components are passivated to the requirements of MIL QQ-P-35 and ASTM A 967. ***Note: ALL NPT Threads REQUIRE the user to properly install the fitting by using a thread sealant to prevent leaks. Best Value Vacs recommends GAS PTFE Tape Specifications Connection Type 1 Female NPT Connection Size 1 Specified by User Connection Type 2 Male NPT Connection Size 2 Specified by User Material 316 Stainless Steel ASTM A-276 and A-479 bar stock, A-182 forgings. Working Pressure (PSIG) 1/4" - 7750 3/8" - 6800 NPT Pressure Rating >10,000PSI ASME B31.3 SSP proudly makes Duolok®, TruFit®, FloLok® and hundreds of other products 100% in the USA!
$9.93 - $14.19
Tri Clamp / Tri Clover U-Bend
Tri Clamp / Tri Clover U-Bend Tri-Clamp / Tri Clover connection U-Bend made out of 304 sanitary stainless steel allows the user to make a 180 degree connection with their system and redirect flow as needed: Tri-Clamp / Tri-Clover Sizes Available: 1" (Fits 1.5" Tri-Clamp) 1.5" 2" 3" 4" 6"
$46.83 - $353.33
Crystallizing Dish
Crystallizing Dish Crystallization dishes work great for small batch mixing using heating & stirring plates, evaporation of any solvents in small amounts, and crystallization. This crystallization dish is made out borosilicate glass and features a pouring spout making it easy to transfer any liquid substance. Specifications Material Borosilicate External Diameter 98mm (+/- 1mm) Overall Height 49mm (+/- 1mm) Internal Diameter 94mm (+/- 1mm) Internal Depth 47mm (+/- 1mm) Features Pouring Spout
$7.10
PosiGrip 15 Mil Flock-Lined Nitrile Gloves - Large
PosiGrip 15 Mil Flock-Lined Nitrile Gloves - Large PosiGrip 15 Mil Flock-Lined Nitrile Gloves are great for handling hazardous chemicals and provide a nonslip Diamond embossed texture on the surface of the glove that enhances the grip while your hands are wet. These gloves are 15 Mil thickness and are recommended for medium to heavy duty work. They are designed to be to protect against abrasions, cuts, and a range of solvents, fats, and chemicals. These gloves are FDA Approved 21 CFR 170 to 199 and come in a pair of 2 and are size Large. Applications: Food Service Janitorial Hazardous Cleanup Chemical Handling Test Standards: FDA Approved 21 CFR 170 to 199 Abrasion Resistance Level 4 Cut Resistance Level 1 Tear resistance Level 0 Puncture Resistance Level 1 Methanol Protection Level 2 n-Heptane Protection Level 2 Sodium Hydroxide Protection Level 3
$14.19
6" Tri-Clamp x 30" Column Cooling Coil with Dip Tube
6" Tri-Clamp x 30" Column Cooling Coil This column cooling coil is designed to fit in 6" Tri-Clamp material columns and allows the user to either chill or heat the column up from the inside which increased the surface area beyond a standard dewaxing jacket and reduces the need for dry ice. This cooling coil is made out of 304 stainless steel and has a 3/8" diameter coil spiraling from (3) 1/4" FNPT ports on the top with 2 of them connecting to the coil and one of the connecting to the dip tube
$425.70
BVV™ Extraction RACK # 2
BVV™ Extraction RACK # 2 (Assembled units come with a 30-day warranty) Note: The unit does not come assembled - select "pre-assembled" from the drop-down menu to have the unit assembled by BVV before shipping Pipe hangers are not included There is no warranty on unassembled units Shipping Notice: If the customer orders the rack as assembled, then the item will only ship via freight and there will be additional shipping charges. Extraction Rack 2 Technical Drawing This rack fits the following BVV™ Extraction Systems: 8.5LB Athena 2LB Little Icarus 5LB Icarus Specifications (Does not include height with casters) Main Base Dimensions 33" X 30" Vertical Dimensions 33" X 48"
$1,419.01 - $1,631.86
1" 37 Degree x 48" Length JIC Braided Stainless Steel Hose
1" 37 Degree JIC Braided Stainless Steel Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications. They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal and they should always be tightened and untightened using 2 wrenches. ***Note: Do not exceed the specified hose bend radius or the inner PTFE liner will kink and the hose integrity will become compromised and should not be used. Specifications: Connection Type(s): 1" 37° Female JIC Swivel (1 5/16"-12) Liner Material PTFE (Teflon) Braid Material 304 Stainless Steel Swivel Material 304 Stainless Steel Temperature Rating -65° to 450°F Pressure Rating 533 PSI Chemical Resistance Excellent Max Bend Radius 9"
$312.18
1/4" Stainless Steel Hose Barb Union
1/4" 304 Stainless Steel Hose Barb Union
$4.97
BVV Compression End Caps
3/8" BVV Compression End Caps These End Caps come with a 3/8" Female Compression connection welded to the end cap with a sanitary weld. They allow the user to adapt and connect a 3/8" male tube stub connection to the lid. Specifications Material 304 Stainless Steel Connection Type: Tri-Clamp 3/8" Female Compression Connection Standard: 3A Sizes Available: 1.5" 2" 3" 4" 6"
$56.76 - $198.66
High-Temp GL to Stainless Steel Tube Stub
High-Temp GL to Stainless Steel Tube Stub High-Temp GL to Stainless Steel Tube Stub allows the user to connect a compression fitting or flexible tubing to the adapter and withstand higher temperatures than a normal polypropylene GL adapter. Specifications: 1/4" or 3/8" OD Stainless Steel Tube Stub GL14 or GL18 Female Connection Straight Style 150°C or 250°C Low Temp/High Temp GL Adapter
$29.80 - $42.57
300L 304SS Jacketed Collection and Storage Vessel with 12" Tri-Clamp Port and Locking Casters
300L 304SS Jacketed Collection and Storage Vessel with 12" Tri-Clamp/ Tri Clover Port and Locking Casters This massive 304 Stainless Steel Jacketed vessel can hold up to 300L of water (~80 gallons) and has a 12" Tri-Clamp port, (2) 1.5" Tri-Clamp ports, and (1) 1/2" FNPT port on the top and a 6" Tri-Clamp port on the bottom of the vessel. The outer jacket has 2x 1/2" FNPT ports to allow the circulation of heat transfer fluids and can also be used a vacuum jacket and can hold 43L or 11.5 gallons of fluid in the outer jacket. This unit also features 4 stainless steel legs with locking casters to allow the vessel to be moved around easily. (Note: this unit comes bare and does not include any fittings besides the legs with casters.) Specifications Material 304 Stainless Steel Overall Dimensions 65" Tall x 30" Wide Pressure Rating 100 PSI MAX Connection Type(s): (1) 12" Tri-Clamp Top Port (2) 1.5" Tri-Clamp Top Ports (1) 6" Tri-Clamp Bottom Port (2) 1/2" FNPTOuter Jacket Ports ***Note: This item will ship via freight ONLY.
$4,966.54
50L Stainless Steel Jacketed Reactor
What is a Jacketed Reactor? A reactor is a vessel that contains a chemical reaction, which opens them up for a variety of applications in the chemical processing field. It’s used as a tool for many different processes related to extraction, winterization, distillation, and post-processing. A reactor can come in different sizes, shapes, and forms. It can even come in different materials including stainless steel or glass. In terms of cannabinoid processing, the most common use for a reactor is large-scale winterization. Here, a single or double jacketed reactor is ideal. This is because it allows you to circulate fluid around the exterior or interior jacket, chilling the mixture inside. As the mixture becomes colder, the fats and waxes within it begin to coagulate and fall out of the solution. Reactors can also be used for homogenizing mixtures or as stand-alone extraction vessels. Glass reactors are only able to handle negative pressure which, in turn, limits their usability. Our 50-Liter Stainless Steel Jacketed Reactor is designed for usage with positive pressure. Additionally, the vessel jacket can circulate chilling fluid or act as vacuum insulation. Key Product Features Vessel Capacity: 50 liters (13 gallons) or 10 lbs of botanical material Outer Jacket Capacity: 14.22 L or 3.76 gallons Rated to 100 PSI MAX Product Applications Ethanol Extraction Winterization Filtration Pre-Chilling Solvent Mixing & Homogenization 50LJR Drawing Note: this unit comes with no hardware and is completely bare.
$1,738.29
Tri-Clamp to 1" Barb
Tri-Clamp to 1" Barb / Tri Clover End Caps These tri-clamp end caps: Have a 1" Hose Barb connection Come in either 1.5", 2" tri-clamp sizes Are made of 304 stainless steel
$42.57
1.5" Tri-clamp Spool x 3" Length x 1/2" Male NPT x 1/4" Male NPT
This is a sanitary spool that is sure to make a great connection. This product is sure to prevent leaking and is extremely easy to clean. 1.5" Triclamp / Tri Clover x 3" x 1/2" Male NPT x 1/4" Male NPT
$49.67
BVV Clear Brewing Silicone Gaskets
BVV Clear Brewing Gaskets Gasket made of Silicone come in a variety of tri-clamp / tri-clover sizes ranging from 3/4", 1", 2", 3", 4" and 6" Tri-clamp. The 4" and 6" gaskets also have a no flange option that has the inside flange of the gasket removed.
$0.91 - $4.26
Pre-Built BIFLOW Manifold with BVV 316SS Full Bore Valves
Pre-Built BIFLOW Manifold with BVV 316SS Full Bore Valves (This part is fully assembled and Nitrogen Tested for Leaks at BVV™) This BVV™ BIFLOW Manifold is fully assembled and nitrogen tested for leaks at our warehouse. This manifold comes with 2 BVV 316SS Full Bore Valves with (2)1/4" 37° JIC Flares. This manifold is made out of 304 stainless steel with a Tri-Clamp end connection on either side. Key Features: Pre-built and Nitrogen Tested for Leaks BVV 316SS Full Bore Valves with 1/4" 37° JIC -40F to 450F 304 High Polish Stainless Steel 1.5" or 2" Tri-Clamp Connections Specifications Lid Material 304 Stainless Steel Valve Material 316SS Full Encapsulated PTFE Core - 1/4 Turn Flare Size (2) 1/4" 37° JIC Tri-Clamp Size(s) Selectable through Dropdown Nitrogen Tested Yes
$302.25 - $306.51
UL Listed Pro Series Vacuum Pump Complete Service Kit
Pro Series Vacuum Pump Complete Service Kit This is a compelete vacuum pump service kit for the BVV™ Pro Series 5.6, 11.3, 21.2CFM line of vacuum pumps and allows the user to completely rebuild their pump and keep it running like new.
$475.37 - $546.32
You have seen 432 out of 833 products