Sale & Refurbished

Sale -33%

Quantity

Glas-Col Glas-Col Thermocouple Type "J"

Glas-Col Thermocouple Type "J" A thermocouple is a sensor that measures temperature. This type of sensor consists of two different types of metals that when welded together create a junction and small voltage which is then read by an indicator or control. Glas-Col offers thermocouples in various types, diameters and probe lengths. Type J: is the most frequently used thermocouple, and it consists of a positive (Iron) and a negative (Constantan) leg. Specifications D x L 1/4" x 18" Lead Length 72"

Read more less

$408.42 $272.28

Quantity
Sale -62%

Quantity

High-Polish Quick-Clamp Sanitary Tube Fitting, 304 Stainless Steel Straight Adapter For 2" Tube Od x 2 Npt Male

For Use With: Air, Water Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270

Read more less

$171.97 $64.49

Quantity
Sale -25%

Quantity

P10 Distillation Head - USA Made

P10 BVV™ Distillation Head P10 Distillation Head has 2 sets of vigreux in the distillation column with 45/50 lower joint, 24/40 Thermometer Joint, and 34/45 side joint and includes GL-14 barb connections. MADE IN THE USA Designed for 10 Liter Flasks Set of 2 vigreux to allow for more packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**

Read more less

$1,146.45 $859.84

Quantity
Sale -58%

Quantity

SSP Corporation Union Tee, 1/2 Tube Fitting x 1/2 Tube Fitting x 1/2 Tube Fitting, 316 SS

Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 1/2 in Connection 2 - Type Tube Fitting Connection 2 - Size 1/2 in Connection 3 - Type Tube Fitting Connection 3 - Size 1/2 in Brand Series Duolok Shape Tee End Connections TF x TF x TF Production Category 1 End Connection Type Duolok Tube End

Read more less

$85.98 $35.83

Quantity
Sale -60%

Quantity

SSP Corporation Female Elbow, 3/8-18 FNPT x 3/8-18 FNPT, 316 SS

Body Material 316 SS Connection 1 - Type Female National Pipe Thread Connection 1 - Size 3/8-18 Connection 2 - Type Female National Pipe Thread Connection 2 - Size 3/8-18 Brand Series TruFit Shape Elbow End Connections FNPT x FNPT Production Category 4 End Connection Type Female National Pipe Thready by Female National Pipe Thread

Read more less

$28.66 $11.46

Quantity
Sale -47%

Quantity

SSP Corporation Pipe Reducing Adapter, 1/2-14 FNPT x 3/8-18 MNPT, 316 SS

Body Material 316 SS Connection 1 - Type Female National Pipe Thread Connection 1 - Size 1/2-14 Connection 2 - Type Male National Pipe Thread Connection 2 - Size 3/8-18 Brand Series TruFit 10K Shape Straight End Connections FNPT x MNPT Production Category 1 End Connection Type Female National Pipe Thread by Male National Pipe Thread

Read more less

$21.50 $11.46

Quantity
Sale -32%

Quantity

Swagelok Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting

Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting Overview Straight Pattern, High-Flow Make fine adjustments in low- or high- pressure, and low-, medium-, or high- flow applications with Swagelok metering valves that deliver accurate flow control when it matters in situations such as analytical or research applications. Safe Product Selection The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Warning: Do not mix/interchange Swagelok products or components not governed by industrial design standards, including Swagelok tube fitting end connections, with those of other manufacturers. Specifications: BODY MATERIAL -316 Stainless Steel CONNECTION 1 SIZE - 3/8 in. CONNECTION 1 TYPE - Swagelok® Tube Fitting CONNECTION 2 SIZE - 3/8 in. CONNECTION 2 TYPE - Swagelok® Tube Fitting CLEANING PROCESS - Standard Cleaning and Packaging (SC-10) MAXIMUM TEMPERATURE °F (°C) - 400 (204) MINIMUM TEMPERATURE °F (°C) - -10 (-23) CV MAXIMUM - 0.15 Handle Style - Knurled

Read more less

$315.28 $214.96

Quantity
Sale -47%

Quantity

Boldtbags Open Top Wash Bag

Open top Washbags are the improved design from our classic washbags that feature an easy open and easy loading design. Each bag is constructed in full mesh 220 micron material. This allows for easy flow of water and easy of washing. All washbags have a zipper that circles the entire bag. Users can open to any degree for varied loading and collection. An extended flap is able to fold over the zipper for additional reinforcement. All current washbags feature upgraded stitching that ensures no product is lost to the seam. 10” Diameter 13” Height Designed for 5lb of organic material.

Read more less

$107.48 $57.32

Quantity
Sale -30%

Quantity

Refurbished GRACO Pneumatic Diaphragm Pump -40C

Graco Pneumatic Diaphragm Pump for Ethanol NOTE: This product has been refurbished and tested to be in good working order. The product may show cosmetic signs of use such as discoloration or minor scratches. This air driven diaphragm pump is designed to be used with ethanol filtration, pumping processes, and BVV Centrifuges. It's unique rugged design can withstand temperatures from -40C to -80C. The inner diaphragms are made out of PTFE and the main body of the pump is made out of 316 Stainless Steel. Specifications -40C -80C Power Source Air Operated 100PSI 28CFM Certification Required No Certifications ATEX Fluid Section Material Stainless Steel Pump Inlet/Outlet 716-3/4 Inc, 16gpm (19mm, 61lpm) Center Section Polypropylene Standard Air Vale (NPT) Porting SST Standard Porting (NPT) Seats 316 SST Balls PTFE Diaphragms PTFE PTFE Overmolded Manifold O-rings PTFE Max Operating Temp. 220°F (105°C)

Read more less

$5,732.27 $4,012.59

Quantity
Sale -30%

Quantity

Refurbished - Pressure Filtration System - 6 x 28 - Bare

This filter system is designed for high flow rates to filter unwanted precipitates from your oleoresin. The housing provides full enclosure of your filter bags, which are fully supported by the strainer basket within the housing to prevent blowouts. Pressure and high flow rates may be applied to get the fastest flow through filter bags. Using the housing allows full exhaustion of a bag prior to changing it without the sacrifice in filtering time.These filter bag housings use an eye-bolt clamp style to allow for high pressure without leakage, while still maintaining an easy to remove cover. When one filter bag gets filled, it can easily be swapped out by removing the lid while not under pressure and pulling the old bag out. The main seal on the housing is Buna-n rubber. The liquid pump is of 316 Stainless Steel Construction with PTFE seals and runs on compressed air or nitrogen. Built options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder With Pump options Include: 1x 304 Stainless Steel Filter Bag Housing 1x 304 Stainless Steel Basket 1x 304 Stainless Steel Displacement Cylinder 1x 316 Stainless Steel Liquid pump Connecting hose or hardline tubing 4x Nomex Filter Bags (1μm, 5μm, 25μm, and 100μm) Specifications PFS-790-15 PFS-790-45 Flow Rate (GPM) ≤15 ≤45 Max Pressure (PSI) 100 @28 CFM Volume (in^3) 790 Working Temperature (°C) -40 - 100 Air Hose Connection ¼” JIC Flare ½” JIC Flare Filter Bag Housing Dimensions (LxWxH) 14” x 11” x 41” Filter Bag Trade Size #8 Included PVC Hose size ID ¾” 1” *This unit requires an air compressor for operation (not included)

Read more less

$974.49 $680.71

Quantity
Sale -25%

Quantity

6" - 4" Hemi Reducing Elbow

This tri clamp 6” - 4” reducing end cap has a 90 degree bed that works well for the base of heat exchangers and also in falling film evaporators.

Read more less

$286.61 $214.96

Quantity
Sale -33%

Quantity

Glas-Col Glas-Col Thermocouple Type "J"

1/4" x 12" 72" leads, mini plug

Read more less

$193.46 $128.98

Quantity
Sale -36%

Quantity

Jacketed Collection Spool

8"x 52" Jacketed Collection Spool This spool is 8" in diameter x 52" in length with 4" Tri-Clamp ports on either end. The top has 1/4" and 1/2" NPT ports to add a gauge and pressure relief directly to the vessel. The spool has a closed jacket with 1/2" NPT ports that make this spool ideal to use as a collection tank on a rack-mounted system.

Read more less

$1,576.38 $1,003.15

Quantity
Sale -40%

Quantity

SSP Corporation 1/2 in. Tube Fitting x 1/4-18 MNPT, 316 SS

Body Material 316 SS Connection 1 - Type Tube Fitting Connection 1 - Size 1/2 in Connection 2 - Type Male National Pipe Thread Connection 2 - Size 1/4-18 Brand Series Duolok Shape Elbow End Connections TF x MNPT Production Category 1 End Connection Type Duolok Tube End by Male National Pipe Thread

Read more less

$35.83 $21.50

Quantity
Sale -43%

Quantity

Glas-Col Glas-Col 2 L Stir Mantle

Glas-Col 2 L Stir Mantle Specifications Material aluminum housed Max temperature C 400 Height (in) 6 Outside Diameter (od)(in) 12 Capacity 2 L Volts 115 Watts 500 Includes: Separable 4-ft., 2-wire cord and locking connector.

Read more less

$1,003.15 $573.23

Quantity
Sale -62%

Quantity

CandyWorx Candyworx Depositmore JR - Gummy Depositor USA Made

An efficient, repeatable, flexible depositor for “anything that pours!” This single pump unit is capable of 720-1020* pieces per hour. Works great for dispensing gelatin based product, soft candy, chocolate, and more! The DM JR includes heated components to prevent any clogging and its easy-to-build design makes disassembly a breeze. The unit can be operated both automated or manually. Made in the USA. Check out our Cut Sheet for more info! Depositmore™ Cut Sheet

Read more less

$11,464.55 $4,299.21

Quantity

You have seen 112 out of 112 products

BVV’s Sales & Refurbished collection features discounted equipment, refurbished systems, and special-offer products available for a limited time. This collection includes professionally inspected and tested refurbished equipment, as well as new items offered at reduced pricing, providing a cost-effective way to access reliable processing solutions.

All refurbished equipment is evaluated to ensure proper functionality and dependable performance before being offered for sale. With limited quantities and rotating inventory, BVV’s Sales & Refurbished collection offers an opportunity to save while still sourcing equipment backed by BVV’s expertise and support.

Glas-Col Glas-Col Thermocouple Type "J"

SSP Corporation Union Tee, 1/2 Tube Fitting x 1/2 Tube Fitting x 1/2 Tube Fitting, 316 SS

SSP Corporation Female Elbow, 3/8-18 FNPT x 3/8-18 FNPT, 316 SS

SSP Corporation Pipe Reducing Adapter, 1/2-14 FNPT x 3/8-18 MNPT, 316 SS

Swagelok Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting

Glas-Col Glas-Col Thermocouple Type "J"

SSP Corporation 1/2 in. Tube Fitting x 1/4-18 MNPT, 316 SS

Glas-Col Glas-Col 2 L Stir Mantle

CandyWorx Candyworx Depositmore JR - Gummy Depositor USA Made