BFCM- 10
CHEMTEK ChloroSorb Acidic
ChloroSorb Filtering Media is an acid-activated bentonite/carbon blend for bleaching and deodorization. It is generally used for additional bleaching efficiency in conjunction with other sorbents. Contains 5% carbon. ChloroSorb SDS
$71.57 - $357.86
BVV 2540 Nanofiltration Skid
BVV 2540 Nanofiltration Skid Note: This product carries 8 - 12 week lead time Perform organic solvent recovery or botanical extract decolorization with ease with our 2540 nanofiltration skid. BVV's 2540 Nanofiltration Skid is designed to meet Class 1 Division 1 standards. With the ability to recover 30 gallons of ethanol per hour without the application of heat preserving target compounds and utilizing a fraction of the energy consumption of a traditional falling film. Processing Power Capacity: 15 GPH or 30 GPH of solvent recovery. Solvents: Ethanol, Methanol Specifications 4X 2540 nanofiltration housings Stainless steel 6GPM pump with PTFE seals 7.5HP C1D1 1750 RPM Motor 7.5HP VFD 3/60/230 NEMA 4X enclosure (13A) Insulated 2"x18" Heat Exchanger Polyscience 1.5HP Chiller 230/60/1/23.1 700PSI Pressure Relief Valve C1D1 Flowmeter 2X 0-1000 PSI Pressure Gauges 1.5" Intake & Retentate Lines 1/2" Permeate & Pressure Relief Lines Footprint (DxWxH) 30"x39"x79" Weight: 400 lb Maximum Pressure Rating: 700PSI Performance Variable Frequency Drive-based flow control Complete pressure control with manual pressure controls Retentate cooling with inline Heat exchanger & chiller 700PSI pressure relief valve with diversion line *Components shown are subject to change**This unit is meant for bulk solvent recovery, 90% of the total volume of solvent an additional solvent recovery apparatus is recommended to evaporate to dryness*
$58,689.63 - $64,415.45
50L Turnkey Reactor Kit
50L Turnkey Reactor Kit The BVV 50L Double Jacketed Glass Reactor Kit is the ideal solution for small to medium-sized solvent recovery and decarboxylation applications. This kit includes everything to get you up and running including a Single 50L triple-layer Glass Reactor with Condenser, either a BVV 19L Heated circulator capable of heating to 220C or a UL-listed Huber T305 Capable of heating up to 300C, a 1HP Polyscience 6160T for chilling the condenser, a Welch BTpro100 for vacuum, 25ft of 3/8" Gum rubber tubing for vacuum connections, 20ft of reinforced PVC hose for the chiller, 1/2" Stainless Steel JIC Hoses for the heater, 5 Gallons of Therminol Heat transfer fluid and 5 Gallons of Propylene glycol. 50L Double Jacketed Glass Reactor Specifications Glass Material: GG-17 High Borosilicate Glass Internal Volume: 50L 10.5L Jacket Capacity Shelf Material: Aluminum Alloy Homogenizer Power: 110V/60Hz Homogenizer Speed: 0-400 RPM Digital Homogenizer Control Digital temperature probe readout included Double Jacket 3/4" Jacket Connections 1/4" and 3/8" Vacuum Connections Length: 24 in. Width: 30 in. Height: 90 in. Polyscience 6100 1 HP Chiller Specifications 6100 Series 1 HP Chiller with Turbine Pump, 100psi; 13.2l/min Display: LED Working Temperature Range C: -10 to 40 Temperature Stability: +/-0.1 Temperature Calibration Capability: 1-point Pump Type: Turbine Working Temperature Range F: 14 to 104 Working Temperature Range C: -10 to 40 Reservoir Capacity (gallons): 1.11 Reservoir Capacity (liters): 4.2 Reservoir Cover: Screw-on cap Cleanable Air Filter: Yes Cleanable Fluid Filter: Yes Temperature Stability F: +/-0.2 Temperature Stability C: +/-0.1 Display: LED Display Resolution (Read): 0.1 Pump Type: Turbine Process Connections: 1/2" FNPT Over-Temperature Protection / Failsafe Heater Control: Yes Reservoir Liquid Level Indicator: Yes Reservoir Drain: Yes Cool Command Refrigeration Technology: Yes WhisperCool Environmental Control Technology: Yes Maximum Ambient Temperature F: 95 Maximum Ambient Temperature C: 35 Overall Dimensions (LxWxH inches): 27.6 x 14.5 x 22.6 Overall Dimensions (LxWxH cm): 70 x 36.8 x 57.5 Compressor Size (HP): 1 Refrigerant: R134a Shipping Weight (pounds): 199 Shipping Weight (kilograms): 90 Welch BTpro100 Specifications Model BTpro100 Free Air Displacement@60Hz,lpm(CFM) 100(3.5) Ultimate Vacuum Pressure, Torr 6 Maximum Vacuum, in. Hg 29.7 Horsepower, HP (watts) 0.5(390) Built-in adjustable vacuum - Gas Ballast Yes Head Material PTFE Diaphragm PTFE Inlet/outlet Connection NW16 flange1 Agency (National Recognized Lab) cUL Weight, lbs (kg) 40.3(18.3) Overall DimensionsLxWxH in.(cm) 9x15x7(23x38x18) Shipping Weight, lbs(kg) 48.5 (22) Shipping Carton DimensionsLxWxH in.(cm) 18.9x12.6x11.8(48x32x30) HUBER T305 Specifications General Information & Temperature Controller Temperature range 65...300 °C Temperature stability ±0,02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "Basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 425 x 250 x 631 mm | 16.73 x 9.84 x 24.84 inches Weight 37 kg | 81.59 pounds Heating / Cooling Capacity Heating capacity 4,8 kW Circulation Pump Pressure pump max. 45 lpm ; 0.9 bar | 11.89 gpm ; 13.05 psi Pump connection M24x1,5 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Analogue input via optional Com.G@te Analogue output via optional Com.G@te Digital interface RS232, Ethernet, USB Device, USB Host Operating Data Old sku 1003.0022.01 Permissible ambient temp. 5 to 40 °C Filling volume min. 1.45 Liters | 0.38 gal Volume of expansion 2.8 Liters | 0.74 gal Power supply 208V 3~ 60Hz Current max. 15 A Fusing 15,5 A
$32,207.73 - $74,435.63
Neocision ULTRA-Low Chest Style Freezer with Touch Screen LCD (-86°C) 25 Cubic Feet - ETL Rated
Neocision ULTRA-Low Chest Style Freezer with Touch Screen LCD (-86°C) 25 Cubic Feet - ETL Rated The brand new Neocision ETL Rated 25 cubic foot -86°C Ultra-Low Chest Freezer is a lab grade freezer at an affordable price with great temperature stability. This unit will run productively and adequately while brandishing a sleek design that will fit any lab or office setting. Every unit accompanies various safety and protection features taking into consideration user and item safety. These highlights incorporate high and low-temperature alerts. These units are appropriate for emergency clinics, creature cultivation, pharmaceutical organizations, and research foundations. They are intended to store pharmaceuticals, medication, immunizations, natural materials, testing reagents, research facility materials and can likewise be utilized to pre-chill solvents or winterize material. Key Features: ETL Rated Durable Powder Coated Exterior Touch Screen LCD with Datalogging Capabilities Stainless Steel Interior CFC-Refrigerant Free Power Failure and Over Temp Alarm High and Low Temp Alarms Large Digital Display Heavy Duty Rolling Casters (3) 1" ID Ports for putting lines through the freezer Backup battery Included. Specifications Model Number BVV™-86C25 Voltage 115V / 60Hz / 15A Wattage 1800w Capacity 25cu ft. / 730L Internal Dimensions 34.5" x 51.5" x 23.5" Exterior Dimensions 43" x 76" x 36" Temperature Range -40°C to -86°C Weight 700lbs Rating ETL Rated
$12,883.09
Flexible Rubber Foam Pipe Insulation Tee, 1/2" Thick Wall, 1-3/8" ID
Flexible Rubber Foam Pipe Insulation Tee Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint. For Use On Pipe Insulation Type Tee Wall Thickness 1/2" ID 1 3/8" OD 2 3/8" For Pipe Size 1 For Copper Tube Size 1 1/4 Temperature Range -295° to 220° F Heat Flow Rate 0.25 Btu @ 75° F Density 4.5 lbs./cu. ft. Material Buna-N/PVC Foam Color Black Flexibility Flexible Cell Type Closed Tube Style Slit Specifications Met ASTM E84 25/50 for Flame and Smoke, ASTM C534 Performance Properties Moisture Resistant R Value 2 Additional Specifications SDS RoHS RoHS 3 (2015/863/EU) Compliant REACH REACH (EC 1907/2006) (01/17/2022, 223 SVHC) Compliant DFARS Specialty Metals COTS-Exempt Country of Origin United States USMCA Qualifying No Schedule B 392690.9988 ECCN EAR99
$21.47
Welch Explosion Proof CRVpro8 Direct Drive Rotary Vane Vacuum Pump
Welch Explosion Proof CRVpro8 Direct Drive Rotary Vane Vacuum Pump ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3086E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr Specifications Application CRVpro8 Free Air Displacement @ 60 Hz, cfm (L/min) 5.6 (158) Free Air Displacement @ 50 Hz, m³/hr (L/min) 8 (133) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1000 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 49.6 (22.5) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)
$7,543.77
Leader Ecoplus Horizontal Multistage Pump 240 3/4 HP - 115v
Leader Ecoplus Horizontal Multistage Pump 240 3/4 HP - 115V Applications Multi-stage, self priming centrifugal pump with horizontal shaft, with optimal liquid aspiration even in the presence of air bubbles, featuring extremely quiet operation suitable for domestic water supply and pressurization, irrigation of gardens and general water movement. Constructional features of the pump Technopolymer pump body and motor support. Technopolymer impeller, diffuser, self-priming disc. Carbon/ceramic mechanical seal. Constructional features of the motor Induction motor, closed and cooled with external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and a long life. Built-in thermal and current overload protection on ECOPLUS230 Bult-in thermal and resettable overload protection on ECOPLUS 240/250 Capacitor permanently in circuit. Manufactured according to UL 778 -2010 & CSA 108-1 Motor protection: NEMA3 Terminal Box protection: NEMA3 Insulation class: F Standard voltage: 115v 60Hz Technical data Operating Range From 1 to 27gpm with a head up to 197ft (85 psi) Liquid quality requirements: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water Liquid temperature Range: From 32°F to 95° Maximum Suction depth: 26 ft Maximum ambient temp: 104°F Maximum operating pressure: 116 psi Installation: fixed or portable in a horizontal position Special version on request other voltages and/or frequencies Leader Ecoplus Pump Data sheet EcoPlus Pump Instructions
$658.47
Table Top Cart Filler XL Hose Assembly JIC Heated Stainless Steel Hose
Table Top Cart Filler XL Hose Assembly JIC Heated Stainless Steel Hose This assembly includes a heated hose with a luer lock dispensing tip. It can be used to dispense a viscous extracted oil into a cartridge or syringe by using the toggle valve towards the tip. The hose is heated and insulated. The hose temperature is controlled by an Digital PID. The hose and PID controller are made in the USA, and of the best quality. The hose uses Platinum Thermocouples for durability and accuracy, for many many years of service. Hose Temperature Rating: 50°F - 450°F Controller Temperature Range: 50°F -450° Non-Metered Dispensing with toggle valve control. Each side of the heated hose assembly is a 1/4" JIC 37° Fitting, the toggle valve/Lure Lock assembly is easily removed for cleaning.
$2,147.18
Welch High Capacity Diaphragm Pumps 2062
Welch High Capacity Diaphragm Pumps 2062 ***Note: This item has a possible 1-2 week lead time depending on stock availability*** High Capacity dry diaphragm vacuum pump. PTFE contact surfaces, deep vacuum at with high flow. PTFE Pump, 8 heads. 115V 60HZ 1.5 TORR 119 LPM Specifications Includes 1/4" OD hose barb Common accessory, not included Vacuum Controller Pumping Speed 119 Lit/min. (4.2 CFM) Max. Vacuum 1.5 Torr (2 mbar) 29.9" Hg Tubing Needed 1/4" ID Inlet Connection UNIBARB Exhaust 1/4" OD Dimensions LxWxH inches 21x11x12 Weight 72 LBS Wiring 115V, 60 hz
$7,530.88
Siemens Touch Screen Controller with Explosion Proof Housing for Centrifuges
Siemens Touch Screen Controller with Explosion Proof Housing for Centrifuges Disclaimer: When bought separately and NOT with our Centrifuge this item will have no warranty and all sales are final. Industrial Centrifuges are used to separating liquids from solids and this style of centrifuge excels at alcohol extraction by forcefully separating the alcohol from the biomass. Controller: This centrifuge is controlled by a Siemens Smart Line PLC. This PLC is pre-programmed to have both a soaking cycle, shown as AGITATION TIME on the screen, and a spin drying cycle, made of 4 separate specifications. SPIN TIME 1 through 4 allow the user to choose four different speeds and however long they wish to be at each speed. All four parameters labeled as SPIN TIME combine to make one spin cycle when the Spin button is pressed. To change a parameter, simply tap on the number to be changed and type in the desired value when prompted on screen. Any number displayed within a white box can be adjusted. SPEED SET: This number represents the RPM as a percentage of the machine max speed. In this case the max speed is 1500RPM. SET: This column will dictate how long the centrifuge spins for a cycle or at a specified speed within the cycle. For the Agitation Time, the Set value will control the total length of the agitation cycle. The FWD/REV TIME will control how long the basket will spin in one direction before reversing to cause agitation. The “current” value will only count up while at the set speed for the agitation cycle. CURRENT: The “current” column will give a readout of how long the basket has been spinning at the set speed. This value will not increase while the centrifuge is increasing speed between SPIN TIME values. When running the agitation cycle, it will be complete when the count of seconds in the CURRENT reaches the value in the SET column. The centrifuge will stop automatically. For the spin cycle, the centrifuge will go through all 4 set SPIN TIME values, the CURRENT column will only begin to count when the centrifuge is at the set speed. The cycle time will not account for time taken to get up to speed. Temperature: Shows a live readout of the temperature inside the centrifuge.Inlet Valve and Drain Valve: These are two pre-programmed buttons that can be used with electronic valves. This unit does not come standard with these valves, but leaves the option open for them to be added. Electrical Power Size Specification 45L Input: 240V 1ΦOutput: 240V 3Φ 4kW 160L Input: 240V 1ΦOutput: 460V 3Φ 7kW 280L Input: 240V 1ΦOutput: 460V 3Φ 11kW 475L Input: 240V 3ΦOutput: 460V 3Φ 11kW
$8,588.73 - $10,349.42
CDA 12A w/ Toluene High Purity Extraction Solvent
CDA 12A w/ Toluene HAZMAT ITEMS ARE NON-REFUNDABLE. ALL SALES ARE FINAL (Note: Container style and color may vary) BVV's Ultra High Purity Toluene Denatured Ethanol (CDA 12A) is distinguished by its exceptional purity, Our CDA 12A formulation combines 95% Food Grade/USP/ACS 200 Proof Ethanol, derived from corn, with ~5% high-purity Toluene. Adhering to stringent industry standards, ensuring it meets the precise requirements of our customers, our Ultra High Purity Toluene Denatured Ethanol excels across diverse applications widely adopted as an effective botanical extraction solvent. Being that our Ultra High Purity Denatured Ethanol is made unfit for consumption when denatured with Toluene it is not subject to the Federal Excise Tax on alcohol saving you a huge cost without compromising on it suitability for top-tier extractions. Primarily utilized as pure ethanol in extraction processes, this solvent is favored for its cost-effectiveness and extraction efficiency. Reduce manufacturing costs and increase extraction efficiency with BVV's Ultra High Purity Toluene Denatured Ethanol. Disclaimer: Prices may vary due to market value and for orders of 4 totes or more and a tanker there could be up to a 2 week lead time. Call in for more accurate lead times. Spigots/Faucets are only compatible with 5 Gallon Plastic Jugs and must be purchased separately Trigger Sprayer is only compatible with 1QT and 1 Gallon sizes Key Features: Significantly Reduced Cost due to the absence of Federal Tax Produces Exceptional Quality Extractions Leaves No Residuals or Tastes Evaporates Completely in a Rotary Evaporator Specifications Vapor Pressure: 40.9mmHg at 20°C UN Numbe 1170 Density: 0.7905g/cm³ Specific Gravity 0.7905 Flash Point: 13.9°C (57°F) Boiling Point: 78.5°C (173°F) Melting Point: -90.0°C (-130°F) Chemical Formula: Ethanol C2H6ON-Heptane C7H16 CAS#(s) Ethanol 64-17-5N-Heptane142-82-5 Chemical Formula: Ethanol C2H6ON-Heptane C7H16 Molecular Weight: 72.1057 CAS Registry Number: Ethanol 64-17-5N-Heptane142-82-5 Appearance Colorless Liquid Odor: Mint or acetone-like Density 0.7905g/cm³ Boiling Point: 78.5c/173.3F Solubility in water: Miscible GHS Pictograms: GHS Signal Word: Danger GHS Hazard Statements: H225, H319 GHS Precautionary Statements P210, P233, P240, P241, P242, P243, P261, P264, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P312, P337+P313, P370+P378, P403+P233, P403+P235, P405, P501 UN Identification Number: 1987 Proper Shipping Name: Alcohols Transport Hazard Class: 3 Packing Group: I DOT Placard: What is Denatured Ethanol? Denatured ethanol, also known as denatured alcohol, is ethanol (ethyl alcohol) that has been rendered unfit for human consumption by the addition of denaturants. Denaturants are typically chemicals that make the ethanol taste bad or have toxic effects, and they are added to discourage people from drinking the substance. The denaturation process is done to avoid the high taxes and regulations associated with beverage alcohol, as denatured ethanol is intended for industrial, pharmaceutical, or cosmetic uses rather than for consumption. Common denaturants include heptane, methanol, isopropyl alcohol, acetone, and other chemicals. Denatured ethanol is widely used in various industries, such as in the production of paints, solvents, cleaning products, and as a fuel for alcohol burners. Why is Ethanol Denatured? Ethanol is denatured, or rendered undrinkable, for several reasons: Tax Purposes: Denaturing ethanol allows for the imposition of lower taxes on industrial or non-beverage alcohol compared to potable alcohol. Governments often place higher excise taxes on alcohol intended for human consumption. Regulatory Compliance: Denaturing ethanol is a regulatory requirement to discourage the illegal diversion of tax-free industrial alcohol for beverage use. The addition of denaturants makes it unpalatable and unsafe for consumption. Public Safety: Making ethanol undrinkable helps prevent accidental or intentional ingestion of industrial alcohol, which can be toxic. Denaturing agents are chosen to deter people from attempting to use denatured alcohol as a substitute for beverage alcohol. Industrial Use: Denatured ethanol is widely used in various industries, including pharmaceuticals, cosmetics, and manufacturing. It serves as a solvent, fuel, or raw material in these applications. Common denaturants include substances like heptane, methanol, isopropanol, and various chemicals that make the alcohol unsuitable for human consumption while maintaining its usability in industrial processes. The specific denaturing formulations, such as CDA 12-A mentioned earlier, are defined by regulatory agencies to ensure compliance with safety and tax regulations. What is denatured ethanol used for? Denatured ethanol is used for various industrial and commercial purposes where the alcohol is needed for its properties but should not be consumed. Here are some common applications: Industrial Solvent: Denatured ethanol is widely used as a solvent in industries such as pharmaceuticals, cosmetics, and manufacturing. It is effective in dissolving a variety of substances. Cleaning Agent: Due to its solvent properties, denatured ethanol is used as a cleaning agent for surfaces, equipment, and machinery in industrial and commercial settings. Fuel Additive: Denatured ethanol is sometimes used as a fuel additive, especially in the blending of gasoline. It can improve combustion efficiency and reduce emissions. Paint and Coating Industry: It is used as a solvent in the formulation of paints, varnishes, and coatings. Pharmaceuticals: Denatured ethanol is used in the pharmaceutical industry for various purposes, including the extraction of medicinal compounds. Laboratory Use: In laboratories, denatured ethanol is often used for tasks like sterilization and as a solvent for experiments. Inks and Dyes: It is employed in the production of inks and dyes due to its ability to dissolve pigments. Adhesives and Sealants: Denatured ethanol is used in the formulation of adhesives and sealants. Window Cleaning: It is used in commercial window cleaning solutions. Automotive Industry: In the automotive industry, denatured ethanol is used for cleaning and degreasing. What can be used to denature ethanol? Here are examples of common Completely Denatured Alcohol (CDA) formulations used to denature ethanol: CDA 12-A To every 100 gallons of alcohol, add either: Five gallons of n-heptane or 5 gallons of toluene. CDA-19 To every 100 gallons of ethyl alcohol (not less than 160 proof), add: 4.0 gallons of either methyl isobutyl ketone, mixed isomers of nitro propane, or methyln-butyl ketone 1.0 gallon of either kerosene, deodorized kerosene, gasoline, unleaded gasoline, rubber hydrocarbon solvent, or heptane. CDA-20 To every 100 gallons of ethyl alcohol (not less than 195 proof), add a total of: 2.0 gallons of either unleaded gasoline, rubber hydrocarbon solvent, kerosene, or deodorized kerosene, or any combination of these. What does CDA mean? Completely Denatured Alcohol (CDA) is a type of denatured alcohol that has been rendered unfit for human consumption by the addition of denaturing agents. Denatured alcohol is ethanol (ethyl alcohol) that has been intentionally adulterated to make it toxic, foul-tasting, or otherwise undrinkable. This denaturing process is done to exempt the alcohol from excise duty and other taxes, as it's not intended for use in beverages. The denaturing agents used in CDA can vary, but they often include chemicals such as methanol, isopropanol, or other substances that make the alcohol unpalatable and potentially harmful if ingested. The specific formulation of denatured alcohol may be regulated by government authorities to ensure it meets safety standards and legal requirements. CDA is commonly used in industrial applications, as a solvent, fuel, or as a cleaning agent. It's important to note that due to the addition of denaturing agents, CDA should not be used for purposes that involve contact with the human body or ingestion. Safety precautions, including proper ventilation, should be followed when working with denatured alcohol. What is CDA 12A? CDA 12-A is a formulation specified by the Alcohol and Tobacco Tax and Trade Bureau (TTB) for Completely Denatured Alcohol (CDA). The formula is defined under §21.26 as Formula No. 12-A. The composition of CDA 12-A is as follows: For every 100 gallons of alcohol, add either: 5 gallons of n-heptane or 5 gallons of toluene. This denaturing process renders the ethanol unfit for consumption while meeting regulatory requirements for various industrial applications. CDA formulations, including CDA 12-A, are used to denature ethanol for purposes such as industrial solvents, cleaning agents, and manufacturing processes. Can you remove heptane from CDA 12A? When n-Heptane is added to ethanol it creates an azeotrope between the ethanol and n-heptane. An azeotrope is defined as a mixture of two liquids that have a constant boiling point and composition through distillation. This azeotrope results in the ethanol and n-heptane evaporating at the same temperature, making it extremely difficult to separate the two through distillation. While these azeotropic solvents are still easily recovered from a botanical extract at a relatively low boiling point around 78C/173F using a rotary evaporator or falling film evaporator, it is near impossible to separate the two via distillation. What is an Azeotrope? An azeotrope is a mixture characterized by having identical concentrations in both its vapor and liquid phases. This stands in contrast to ideal solutions, where one component is usually more volatile than the other, allowing for separation through distillation. When an azeotrope forms, the concentrations in both phases remain the same, hindering separation through traditional distillation methods. Azeotropes consist of a blend of at least two different liquids, and this mixture can exhibit either a higher or lower boiling point than either of its individual components. Azeotropes become relevant when certain liquid fractions resist alteration through distillation processes. In typical mixtures, components can be extracted using Fractional Distillation, a process involving repeated distillation stages. The more volatile component vaporizes and is collected separately, while the less volatile component remains in the distillation container, resulting in two distinct, pure solutions.
$34.35 - $2,934.48
Spare Gasket - CO2 Extractor
Spare Gasket - CO2 Extractor Spare Gasket for CO2 Extractor.
$35.79 - $42.94
20L Turnkey Reactor Kit
20L Turnkey Reactor Kit The BVV 20L Double Jacketed Glass Reactor Kit is the ideal solution for small to medium-sized solvent recovery and decarboxylation applications. This kit includes everything to get you up and running including a Single 20L triple-layer Glass Reactor with Condenser, either a BVV 19L Heated circulator capable of heating to 220C or a UL-listed Huber CC-315B capable of heating up to 300C, a 1HP Polyscience 6160T for chilling the condenser, a Welch BTpro100 for vacuum, 25ft of 3/8" Gum rubber tubing for vacuum connections, 20ft of reinforced PVC hose for the chiller, 1/2" Stainless Steel JIC Hoses for the heater, 5 Gallons of Therminol Heat transfer fluid and 5 Gallons of Propylene glycol. 20L Double Jacketed Glass Reactor Specifications Glass Material: GG-17 High Borosilicate Glass Internal Volume: 20L 6.75L Jacket Capacity Shelf Material: Aluminum Alloy Homogenizer Power: 110V/60Hz Homogenizer Speed: 0-400 RPM Digital Homogenizer Control Digital temperature probe readout included Double Jacket 3/4" Jacket Connections 1/4" and 3/8" Vacuum Connections Length: 20 in. Width: 30 in. Height: 76 in. Polyscience 6100 1 HP Chiller Specifications 6100 Series 1 HP Chiller with Turbine Pump, 100psi; 13.2l/min Display: LED Working Temperature Range C: -10 to 40 Temperature Stability: +/-0.1 Temperature Calibration Capability: 1-point Pump Type: Turbine Working Temperature Range F: 14 to 104 Working Temperature Range C: -10 to 40 Reservoir Capacity (gallons): 1.11 Reservoir Capacity (liters): 4.2 Reservoir Cover: Screw-on cap Cleanable Air Filter: Yes Cleanable Fluid Filter: Yes Temperature Stability F: +/-0.2 Temperature Stability C: +/-0.1 Display: LED Display Resolution (Read): 0.1 Pump Type: Turbine Process Connections: 1/2" FNPT Over-Temperature Protection / Failsafe Heater Control: Yes Reservoir Liquid Level Indicator: Yes Reservoir Drain: Yes Cool Command Refrigeration Technology: Yes WhisperCool Environmental Control Technology: Yes Maximum Ambient Temperature F: 95 Maximum Ambient Temperature C: 35 Overall Dimensions (LxWxH inches): 27.6 x 14.5 x 22.6 Overall Dimensions (LxWxH cm): 70 x 36.8 x 57.5 Compressor Size (HP): 1 Refrigerant: R134a Shipping Weight (pounds): 199 Shipping Weight (kilograms): 90 Welch BTpro100 Specifications Model BTpro100 Free Air Displacement@60Hz,lpm(CFM) 100(3.5) Ultimate Vacuum Pressure, Torr 6 Maximum Vacuum, in. Hg 29.7 Horsepower, HP (watts) 0.5(390) Built-in adjustable vacuum - Gas Ballast Yes Head Material PTFE Diaphragm PTFE Inlet/outlet Connection NW16 flange1 Agency (National Recognized Lab) cUL Weight, lbs (kg) 40.3(18.3) Overall DimensionsLxWxH in.(cm) 9x15x7(23x38x18) Shipping Weight, lbs(kg) 48.5 (22) Shipping Carton DimensionsLxWxH in.(cm) 18.9x12.6x11.8(48x32x30) HUBER CC-315B Specifications Common Specifications Temperature range (-20) 28...300 °C Temperature stability ±0.02 °C Temperature control TAC, self-optimizing (True Adaptive Control) Controller Pilot ONE (E-grade "basic") Safety class III / FL Protection class IP20 Dimensions (W x D x H) 13.19 x 15.04 x 17.05 inches Weight 48.51 pounds Heating / cooling capacity Heating capacity 3 - 3,5 kW Circulation pump Pressure pump max. 25 lpm : 0,7 bar | 6.6 gpm ; 10.15 psi Suction pump max. 18.5 lpm : 0,4 bar | bar 4.89 gpm ; 5.8 psi Pump connection M16x1 AG male Permissible viscosity 50 mm²/s Connections Pt100 connection Pt100 Digital interface RS232, Ethernet, USB Device, USB Host Operating data Old sku 2007.0003.01 Permissible ambient temp. 5...40 °C Bath opening W x D / BD 10.63 x 5.71 / 7.87 inches Bath volume 15 Liters | 3.96 gal Filling volume min. 11.5 Liters | 3.04 gal Power supply 208V 2~ 60Hz Current max. 16 A Fusing 20 A
$30,060.54 - $44,375.09
Polyscience 5 Liter General Purpose Water Bath
Polyscience 5 Liter General Purpose Water Bath Key Features: Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads Specifications Working Temperature Range °F Ambient +10° to 212° Reservoir Capacity (liters) 5 Reservoir/Tank Material Stainless Steel Reservoir Cover Hinged Gable Working Access (L x W x D) (inches) 5 x 10.8 x 6 Temperature Stability °F ±0.2° Display 3.25" Flammability Class (DIN 12876-1) I (NFL) Over-Temperature Protection / Failsafe Heater Control Yes Maximum Ambient Temperature °F 104° Overall Dimensions (L x W x H) (inches) 12 x 14.5 x 13.5 Shipping Weight (pounds) 14.0 60Hz Only Part Number WB02A11B Included Hardware Sample Tray Heater Wattage 120 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/1.1 Regulatory Approvals ETL
$1,169.50$858.87
PolyScience LS5 Benchtop Chiller with Turbine Pump, 120V, 60Hz
PolyScience LS5 Benchtop Chiller with Turbine Pump, 120V, 60Hz Key Specifications: Description: LS Series 1/2 HP Benchtop Chiller, Turbine Pump; 43.4 psi; 9.8 l/min Display: LED Connectivity: Optional: RS232 Working Temperature Range °C: -20° to 40° Temperature Stability °C: ±0.1° Temperature Calibration Capability: 1-point Pump Type: Turbine Specifications Working Temperature Range °F -4° to 104° Working Temperature Range °C -20° to 40° Reservoir Capacity (gallons) 0.7 Reservoir Capacity (liters) 2.65 Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Temperature Stability °F ±0.2° Temperature Stability °C ±0.1° Display LED Pump Type Turbine Pump Speed Constant, Single Speed Process Connections 1/2" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes WhisperCool Environmental Control Technology Yes Cool Command Refrigeration Technology Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 23.9 x 10 x 19 in Overall Dimensions (L x W x H) (cm) 60.7 x 25.4 x 48.3 cm Compressor Size (HP) 1/2 Refrigerant R452A Shipping Weight (pounds) 102.0 Shipping Weight (kilograms) 46.3 Catalog Page Number 98-99 Part Number LS51TX1A110C Maximum Pressure (psi) 43.4 Maximum Pressure (bar) 3.00 Maximum Pressure Flow Rate (gpm) 2.60 Maximum Pressure Flow Rate (l/min) 9.8 Cooling Capacity @ -20°C (W) 150 Cooling Capacity @ -10°C (W) 345 Cooling Capacity @ -5°C (W) 395 Cooling Capacity @ 0°C (W) 540 Cooling Capacity @ +10°C (W) 790 Cooling Capacity @ +20°C (W) 900 Cooling Capacity @ +30°C (W) 1020 Cooling Capacity @ +40°C (W) 1140 Included Hardware Two sets of Inlet/Outlet Adapters: ½ inch male NPT, 5/8 inch male NPT Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/12 Regulatory Approvals TUV
$7,387.74
P10 BVV™ Distillation Head - USA Made
P10 BVV™ Distillation Head P10 Distillation Head has 2 sets of vigreux in the distillation column with 45/50 lower joint, 24/40 Thermometer Joint, and 34/45 side joint and includes GL-14 barb connections. MADE IN THE USA Designed for 10 Liter Flasks Set of 2 vigreux to allow for more packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media Increased condenser length and diameter for more efficient condensation of vapor with zero clogging *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$1,145.16
Chromatography Column
Chromatography Column Chromatography Column This 3”x24” chromatography column features an internal volume of 2.7L. It’s commonly used for removing pesticides, separating components, and cleaning different chemical compounds. Additional consumables or accessories will be needed depending on the application. Capacity can be increased with an additional reservoir adapted to the top 45/50 Rodaviss joint. Rodaviss joints are great for disconnecting any stubborn joints. Light grease is still recommended when assembling joints. Light grease is still recommended when assembling joints. Features: Needle control valve 3”x24” column with 2.7L capacity 45/50 Rodaviss joint Sintered disk Stop cock For additional information or questions regarding this kit, accessories, and consumables contact our customer support line. *Notice to customers: All units are inspected for broken glassware or parts before leaving BVV™. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact BVV™ within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact BVV™ within 72 hours from carrier delivery, then BVV™ cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement. **Glassware Safety Disclaimer: BVV™ is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.**
$501.01
Neocision ULTRA-Low Chest Style Freezer with Touch Screen LCD (-86°C) 16.2 Cubic Feet - ETL Rated
Neocision ULTRA-Low Chest Style Freezer with Touch Screen LCD (-86°C) 16.2 Cubic Feet - ETL Rated The brand new Neocision ETL Rated 16.2 cubic foot -86°C Ultra-Low Chest Freezer is a lab grade freezer at an affordable price with great temperature stability. This unit will run productively and adequately while brandishing a sleek design that will fit any lab or office setting. Every unit accompanies various safety and protection features taking into consideration user and item safety. These highlights incorporate high and low-temperature alerts. These units are appropriate for emergency clinics, creature cultivation, pharmaceutical organizations, and research foundations. They are intended to store pharmaceuticals, medication, immunizations, natural materials, testing reagents, research facility materials and can likewise be utilized to pre-chill solvents or winterize material. Key Features: ETL Rated Durable Powder Coated Exterior Touch Screen LCD with Datalogging Capabilities Stainless Steel Interior CFC-Refrigerant Free Power Failure and Over Temp Alarm High and Low Temp Alarms Large Digital Display Heavy Duty Rolling Casters (3) 1" ID Ports for putting lines through the freezer Backup battery Included. Specifications Model Number NEO-86C162 Voltage 115V / 60Hz / 13A Wattage 1560w Capacity 16.2cu ft. / 458L / 121G Temperature Range -40°C to -86°C Exterior Dimensions 79-3/4" x 36" x 40" Interior Dimensions 51-1/2" x 23" x 25" Weight 529lbs Certification ETL Rated
$10,735.91
Haier ULT Twin cool System -86 °C Ultra Low Temperature Freezer 578L (20.5cf)
Haier ULT Twin cool System -86 °C Ultra Low Temperature Freezer 578L (20.5cf) Haier Biomedical Ultra Low Temperature Freezer Key Design Features Microprocessor-controlled system designed for controllable range of -40 °C to -86 °C for cabinet space with 1 °C increment Large LCD touchscreen for cabinet temperature, set temperature, ambient temperature, and input voltage Settable high temperature and low temperature alarms Automatic clean-filter alarm and sensor error alert Adjustable storage shelf height Can be connected with network, and remote alarm systems Optional temperature recorder, storage racks and storage boxes Field Proven Reliability Refrigeration system designed and manufactured with best known practice, and components with highest possible quality Reliability test performed and passed on all models including aging test on control electronics at 85 °C and 85% humidity environment Unique insulated inner door design for four separate storage compartments to minimize frost buildup inside the chamber Specialized control system design for a well-balanced operation of cascade refrigeration system z Safety Equipped with a complete alarm system with optional remote network monitoring system UL, ENERGY STAR and CE certified for application safety Dual independent refrigeration systems, making the samples safer, The dual refrigeration systems run independently and alternately, and both of them can reach up to -80 °C through independent refrigeration. Malfunction alarms including high and low temperature, power outage, sensor errors, high voltage and low voltage, clean-filter, and extremely high ambient, door ajar feature standard Capable of producing two types of alarm outputs: audible buzzer and visible flashing light Multiple built-in system protection features including user-settable protection code for controls, user settable delay to start, voltage compensation system, and protection against extreme high voltages USB port for temperature data downloading Safety padlock compatible on outer door Installation and Application Wide range operating voltage system from 115V to 230V designed to allow units installed in areas with poor voltage condition Suitable for 10 °C to 32 °C Ambient temperature Input voltage and ambient temperature shown simultaneously for ease of monitoring environmental conditions Freezer design for global installations Robust door latch designed for secure door closing and compact casters for ease of maneuvering Low Sound Level Freezer chassis designed to absorb vibration and sound Energy Saving Unique door seal and breaker design for the minimum loss of cold temperature during a door opening High performance VIP insulation panels to minimize cabinet heat gain and to improve temperature stability Patented cabinet insulation system designed for optimal performance of cold storage temperature and minimal frost buildup Condenser fan intelligently start-stop to reduce power consumption Unique design of independent insulated inner door systems for independent access of storage space to provide the maximum protection of stored samples and save energy Warranty Information: 3 years on all parts and 5 years on the compressor Model DW-86L578ST(120/60） DW-86L728ST Technical Data Cabinet Type Upright Upright Climate Class N N Cooling Type Direct Cooling Direct Cooling Defrost Mode Manual Manual Refrigerant HC HC Sound Level (dB(A)) 53 53 Performance Cooling Performance(°C) -86 -86 Temp Range(°C) -40~-86 -40~-86 Control Controller Microprocessor Microprocessor Display LCD LCD Electrical Data Power Supply(V/Hz 120/60 208～230/50 Power(W) 1400 1400 Electrical Current(A) 14 10 Dimensions Net/Gross Weight(approx) 325/355 350/385 716.5/782.6 771.6/848.8 Interior Dimensions(W*D*H) 620*716*1310 766*716*1310 24.4*28.2*51.6 30.2*28.2*51.6 Exterior Dimensions(W*D*H) 895*998*1980 1046*998*1980 35.4*39.3*78.0 41.2*39.3*78.0 Packing Dimension(W*D*H) 950*1055*2150 1100*1105*2150 37.4*41.5*84.6 43.3*43.5*84.6 Container Load(20'/40'/40'H) 12/24/24 10/20/20 Functions Remote Alarm Y Y High/low Temp. Y Y Hot Condenser Y Y Power Failure Y Y Sensor Error Y Y Low Battery Y Y High Ambient Temp. Y Y Door Ajar Y Y Accessories Caster Y Y Foot Y Y Porthole Y/2 Y/2 Shelves/ Inner Doors 3/4 3/4 USB interface Y Y 5V Power Supply Port Y Y Temp Recorder Optional Optional RS232/485 Port Standard Standard CO2 Backup System Optional Optional LN2 Backup System Optional Optional Other Certification UL CE
$25,187.87
Haier ULT Twin cool System -86 °C Ultra Low Temperature Freezer 728L (26cf)
Haier ULT Twin cool System -86 °C Ultra Low Temperature Freezer 728L (26cf) Haier Biomedical DW-86L728J -86°C Upright ULT Freezer 728L / 25.7 cu ft, 220V/60HzKey Design Features Microprocessor-controlled system designed for controllable range of -40°C to -86°C for cabinet space with 1°C increment Large LED display for cabinet temperature, set temperature, ambient temperature, and input voltage Settable high temperature and low temperature alarms Automatic clean-filter alarm and sensor error alert Adjustable storage shelf height Can be connected with network, and remote alarm systems Optional temperature recorder, storage racks and storage boxes Field Proven Reliability Refrigeration system designed and manufactured with best known practice, and components with highest possible quality Reliability test performed and passed on all models including aging test on control electronics at 85°C and 85% humidity environment Unique insulated inner door design for four separate storage compartments to minimize frost buildup inside the chamber Specialized control system design for a well-balanced operation of cascade refrigeration system Safety Equipped with a complete alarm system with optional remote network monitoring system UL and CE certified for application safety Malfunction alarms including high and low temperature, power outage, sensor errors, high voltage and low voltage, clean-filter, and extremely high ambient, door ajar feature standard on DW-86L486/728/828 models Capable of producing two types of alarm outputs: audible buzzer and visible flashing light Multiple built-in system protection features including user-settable protection code for controls, user settable delay to start, voltage compensation system, and protection against extreme high voltages USB port for temperature data downloading Safety padlock compatible on outer door Installation and Application Wide range operating voltage system from 185V to 260V designed to allow units installed in areas with poor voltage condition Suitable for 10°C to 32°C Ambient temperature Input voltage and ambient temperature shown simultaneously for ease of monitoring environmental conditions Freezer design for global installations Robust door latch designed for secure door closing and compact casters for ease of maneuvering Low Sound Level Specialized refrigeration system design using whisper quiet fan and compressors Freezer chassis designed to absorb vibration and sound Energy Saving Unique door seal and breaker design for the minimum loss of cold temperature during a door opening High performance VIP insulation panels to minimize cabinet heat gain and to improve temperature stability Patented cabinet insulation system designed for optimal performance of cold storage temperature and minimal frost buildup Condensator fan intelligently start-stop to reduce power consumption Unique design of independent insulated inner door systems for independent access of storage space to provide the maximum protection of stored samples and save energy Model DW-86L728ST DW-86L728SAT Technical Data Cabinet Type Upright Upright Climate Class N N Cooling Type Direct Cooling Direct Cooling Defrost Mode Manual Manual Refrigerant HC HC Sound Level (dB(A)) 50 50 Performance Cooling Performance(°C) -86 -86 Temp Range(°C) -40~-86 -40~-86 Control Controller Microprocessor Microprocessor Display LCD LCD Electrical Data Power Supply(V/Hz 115/60 220/60 Power(W) 1400 1400 Electrical Current(A) 14 10 Dimensions Net/Gross Weight(approx) 325/355 350/385 716.5/782.6 771.6/848.8 Interior Dimensions(W*D*H) 620*716*1310 766*716*1310 24.4*28.2*51.6 30.2*28.2*51.6 Exterior Dimensions(W*D*H) 895*998*1980 1046*998*1980 35.4*39.3*78.0 41.2*39.3*78.0 Packing Dimension(W*D*H) 950*1055*2150 1100*1105*2150 37.4*41.5*84.6 43.3*43.5*84.6 Container Load(20'/40'/40'H) 12/24/24 10/20/20 Functions Remote Alarm Y Y High/low Temp. Y Y Hot Condenser Y Y Power Failure Y Y Sensor Error Y Y Low Battery Y Y High Ambient Temp. Y Y Door Ajar Y Y Accessories Caster Y Y Foot Y Y Porthole Y/2 Y/2 Shelves/ Inner Doors 3/4 3/4 USB interface Y Y 5V Power Supply Port Y Y Temp Recorder Optional Optional RS232/485 Port Standard Standard CO2 Backup System Optional Optional LN2 Backup System Optional Optional Other Certification UL CE
$27,363.68
Haier Ultra Low Energy Smart Frequency Conversion ULT Freezer 579L (20.5cf)
Haier Ultra Low Energy Smart Frequency Conversion ULT Freezer 579L (20.5cf) Haier Biomedical Ultra Low Temperature Freezer Key Design Features Microprocessor-controlled system designed for controllable range of -40 °C to -86 °C for cabinet space with 1 °C increment Large LCD touchscreen for cabinet temperature, set temperature, ambient temperature, and input voltage Settable high temperature and low temperature alarms Automatic clean-filter alarm and sensor error alert Adjustable storage shelf height Can be connected with network, and remote alarm systems Optional temperature recorder, storage racks and storage boxes Field Proven Reliability Refrigeration system designed and manufactured with best known practice, and components with highest possible quality Reliability test performed and passed on all models including aging test on control electronics at 85 °C and 85% humidity environment Unique insulated inner door design for four separate storage compartments to minimize frost buildup inside the chamber Specialized control system design for a well-balanced operation of cascade refrigeration system z Safety Equipped with a complete alarm system with optional remote network monitoring system UL, ENERGY STAR and CE certified for application safety Dual independent refrigeration systems, making the samples safer, The dual refrigeration systems run independently and alternately, and both of them can reach up to -80 °C through independent refrigeration. Malfunction alarms including high and low temperature, power outage, sensor errors, high voltage and low voltage, clean-filter, and extremely high ambient, door ajar feature standard Capable of producing two types of alarm outputs: audible buzzer and visible flashing light Multiple built-in system protection features including user-settable protection code for controls, user settable delay to start, voltage compensation system, and protection against extreme high voltages USB port for temperature data downloading Safety padlock compatible on outer door Installation and Application Wide range operating voltage system from 115V to 230V designed to allow units installed in areas with poor voltage condition Suitable for 10 °C to 32 °C Ambient temperature Input voltage and ambient temperature shown simultaneously for ease of monitoring environmental conditions Freezer design for global installations Robust door latch designed for secure door closing and compact casters for ease of maneuvering Low Sound Level Freezer chassis designed to absorb vibration and sound Energy Saving Unique door seal and breaker design for the minimum loss of cold temperature during a door opening High performance VIP insulation panels to minimize cabinet heat gain and to improve temperature stability Patented cabinet insulation system designed for optimal performance of cold storage temperature and minimal frost buildup Condenser fan intelligently start-stop to reduce power consumption Unique design of independent insulated inner door systems for independent access of storage space to provide the maximum protection of stored samples and save energy Model DW-86L579BPT Technical Data Cabinet type Upright Climate Class N Cooling Type Direct cooling Defrost Mode Manual Refrigerant HC Noise((dB(A)) 43.5 Performance Cooling Performance(oC) -86 Temp Range(oC) -40~-86 Control Controller Microprocessor Display LCD Electrical Data Power Supply(V/HZ) 100～230/50/60 Power (W) 1100 Electrical Current(A) 6 Dimensions Capacity(L/Cu.Ft) 579/20.4 Net/Gross Weight (approx) 325/355 716.5/782.6 Interior Dimension (W*D*H) 620*716*1310 24.4*28.2*51.6 Exterior Dimension (W*D*H) 895*998*1980 35.4*39.3*78.0 Packing Dimension (W*D*H) 950*1055*2150 37.4*41.5*84.6 Container Load(20'/40'/40'H) 12/24/24 Functions Remote Alarm Y High/Low Temp Y Hot Condenser Y Power Failure Y Sensor Error Y Low Battery Y High Ambient Temp Y Door Ajar Y Accessories Caster Y Foot Y Test Hole Y/2 Shelves/ Inner Doors 3/4 USB Interface Y 5V Power Supply Port Y Temp Recorder Optional 485 Port Standard CO2 Backup System Optional LN2 Backup System Optional Others Certificate CE、UL
$22,897.55
Ultralow Freq. Conversion -86C Freezer, Energy Star 729L (20.5cf) 110-230V/60Hz
Ultralow Freq. Conversion -86C Freezer, Energy Star 729L (20.5cf) 110-230V/60Hz Haier Biomedical Ultra Low Temperature Freezer Key Design Features Microprocessor-controlled system designed for controllable range of -40 °C to -86 °C for cabinet space with 1 °C increment Large LCD touchscreen for cabinet temperature, set temperature, ambient temperature, and input voltage Settable high temperature and low temperature alarms Automatic clean-filter alarm and sensor error alert Adjustable storage shelf height Can be connected with network, and remote alarm systems Optional temperature recorder, storage racks and storage boxes Field Proven Reliability Refrigeration system designed and manufactured with best known practice, and components with highest possible quality Reliability test performed and passed on all models including aging test on control electronics at 85 °C and 85% humidity environment Unique insulated inner door design for four separate storage compartments to minimize frost buildup inside the chamber Specialized control system design for a well-balanced operation of cascade refrigeration system Safety Equipped with a complete alarm system with optional remote network monitoring system UL, ENERGY STAR and CE certified for application safety Dual independent refrigeration systems, making the samples safer, The dual refrigeration systems run independently and alternately, and both of them can reach up to -80 °C through independent refrigeration. Malfunction alarms including high and low temperature, power outage, sensor errors, high voltage and low voltage, clean-filter, and extremely high ambient, door ajar feature standard Capable of producing two types of alarm outputs: audible buzzer and visible flashing light Multiple built-in system protection features including user-settable protection code for controls, user settable delay to start, voltage compensation system, and protection against extreme high voltages USB port for temperature data downloading Safety padlock compatible on outer door Installation and Application Wide range operating voltage system from 115V to 230V designed to allow units installed in areas with poor voltage condition Suitable for 10 °C to 32 °C Ambient temperature Input voltage and ambient temperature shown simultaneously for ease of monitoring environmental conditions Freezer design for global installations Robust door latch designed for secure door closing and compact casters for ease of maneuvering Low Sound Level Freezer chassis designed to absorb vibration and sound Energy Saving Unique door seal and breaker design for the minimum loss of cold temperature during a door opening High performance VIP insulation panels to minimize cabinet heat gain and to improve temperature stability Patented cabinet insulation system designed for optimal performance of cold storage temperature and minimal frost buildup Condenser fan intelligently start-stop to reduce power consumption Unique design of independent insulated inner door systems for independent access of storage space to provide the maximum protection of stored samples and save energy Model DW-86L729BPT Technical Data Cabniet type Upright Climate Class N Cooling Type Direct cooling Defrost Mode Manual Refrigerant HC Noise((dB(A)) 43.5 Performance Cooling Performance(oC) -86 Temp Range(oC) -40~-86 Control Controller Microprocessor Display LCD Electrical Data Power Supply(V/HZ) 100～230/50/60 Power (W) 1100 Electrical Current(A) 6 Dimensions Capacity(L/Cu.Ft) 729/25.7 Net/Gross Weight (approx) 350/385 771.6/848.8 Interior Dimension (W*D*H) 766*716*1310 30.2*28.2*51.6 Exterior Dimension (W*D*H) 1046*998*1980 41.2*39.3*78.0 Packing Dimension (W*D*H) 1100*1105*2150 43.3*43.5*84.6 Container Load(20'/40'/40'H) 10/20/20 Functions Remote Alarm Y High/Low Temp Y Hot Condenser Y Power Failure Y Sensor Error Y Low Battery Y High Ambient Temp Y Door Ajar Y Accessories Caster Y Foot Y Test Hole Y/2 Shelves/ Inner Doors 3/4 USB Interface Y 5V Power Supply Port Y Temp Recorder Optional 485 Port Standard CO2 Backup System Optional LN2 Backup System Optional Others Certificate CE、UL
$27,363.68
Fast-Acting Panel-Mount On/Off Valve
Fast-Acting Panel-Mount On/Off Valve Open and close these valves with the flip of the toggle switch. Commonly used for equipment testing and gas sampling, they have threads and a hex nut below the handle for installation in instrument panels. 316 stainless steel valves are more corrosion-resistant than brass valves. Manual-return valves remain open or closed when the toggle is moved into position. Spring-return valves automatically close when the toggle is released. Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet. Pipe Size Flow Coefficient (Cv) Max. Pressure Temperature RangeDegrees F Toggle Switch Type End-to-EndLg Panel Cutout Dia 1/4 .2 300 psi @ 200 degrees F -20 degrees to 200 degrees Manual Return 2 1/4" 17/32"
$135.99
2" Footmaster Leveling Caster Ivory - 550lb cap
2" Footmaster Leveling Caster Ivory This ingenious product combines the mobility of a caster, the height adjustability of a level mount, and the stability of a foot pad. The GD Series leveling caster profile is integral to its function. A thick aluminum frame is used to achieve the combination of being both strong and compact. The swivel section contains 2 sets of ball bearings for easy maneuverability. Bearing raceway sleeves made from hardened steel prevent scouring to the aluminum frame, leading to high performance and dependable reliability. Moving is easy thanks to a 50 mm diameter wheel mated with an axle shaft made of cold forged steel. And once positioned, the caster provides side access to an ABS thermoplastic thumbwheel used to lower the foot pad. As the wheel is lifted off the ground, the foot pad takes over to make the application completely stationary. Making the fine adjustments to achieve the perfect level set, even under heavy loads, is light work for this world renowned leveling caster. When it is time to move again, simply raise the foot pad to restore the freedom of mobility.
$143.15
Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting
Stainless Steel High Flow Metering Valve - 3/8 in. Swagelok Tube Fitting Overview Straight Pattern, High-Flow Make fine adjustments in low- or high- pressure, and low-, medium-, or high- flow applications with Swagelok metering valves that deliver accurate flow control when it matters in situations such as analytical or research applications. Safe Product Selection The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Warning: Do not mix/interchange Swagelok products or components not governed by industrial design standards, including Swagelok tube fitting end connections, with those of other manufacturers. Specifications: BODY MATERIAL -316 Stainless Steel CONNECTION 1 SIZE - 3/8 in. CONNECTION 1 TYPE - Swagelok® Tube Fitting CONNECTION 2 SIZE - 3/8 in. CONNECTION 2 TYPE - Swagelok® Tube Fitting CLEANING PROCESS - Standard Cleaning and Packaging (SC-10) MAXIMUM TEMPERATURE °F (°C) - 400 (204) MINIMUM TEMPERATURE °F (°C) - -10 (-23) CV MAXIMUM - 0.15 Handle Style - Knurled
$314.92
Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro6
Welch CRVpro Direct Drive Rotary Vane Vacuum Pump CRVpro6 ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3061-01 is wired for North American 115V, 60Hz operation. Includes North American line cord, vacuum inlet hose barb suitable for gum rubber hose from 5/8" to 3/4" ID, and a charge of oil. 3062-01 is wired for North American 230V, 60Hz operation. Includes 230V North American line cord, UK cord, and skuko cord, and a charge of oil. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr.
$5,314.99
Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump
Welch Explosion Proof CRVpro4 Direct Drive Rotary Vane Vacuum Pump ***Note: This item has a possible 1-2 week lead time depending on stock availability*** Product Details Explosion Proof Motor 110-120V/208-240V 60Hz 1 Phase The new CRVpro family of direct drive vacuum pumps offers increased reliability and longer service interval vs. other direct drive rotary vane vacuum pumps. The CRVpro family consumes up to 36% less oil than comparable pumps. Three features drive these benefits: Runs 10°C cooler than comparable pumps. Slows corrosion. Has a 40% larger oil capacity than comparable pumps. Dilutes aggressive chemicals. Has a chemical resistant coating in the oil case and pump module. Protects non-moving parts. The CRVpro family includes all the features you'd expect in a direct drive rotary vane pump: gas ballast, forced oil lubrication, anti-suckback mechanism and thermal overload protection. Suitable applications include freeze drying, degassing, vacuum ovens and concentrators. 3046E-01 comes with an explosion proof motor. Conduit wiring installation required. No cord, plug, or switch provided. Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr. Specifications Application CRVpro4 Free Air Displacement @ 60 Hz, cfm (L/min) 2.8 (78) Free Air Displacement @ 50 Hz, m³/hr (L/min) 4 (67) Ultimate Pressure, torr (mbar) 5x10⁻⁴ (4x10⁻⁴) Noise Level, dBA 50 Motor Speed, RPM, @60Hz, @50Hz 1740 (1450) Motor Power, HP (kW) 0.4 (0.5) Oil Capacity, mL 1150 Connection Flanges NW 16 Inlet Hose Connection* 5/8" to 3/4" Weight, lbs (kg) 46.3 (21) Dimensions, LxWxH, in (mm) 18.2x6.1x9.1 (463x157x230)
$6,684.89
MVP - Fuego 240v Heater - Ethanol
MVP - Fuego 240v Heater - Ethanol All sales final
$7,150.12
Arometrix Fraction Finder
Arometrix Fraction Finder Overview Description The FRACTION FINDER is Arometrix’s real-time molecular monitoring system for refinement processes, such as fractional distillation and isolation. This patented technology is essential for getting the highest-quality, most consistent oils possible. Forget the old ways of relying on experience, guesswork, and eyesight alone – now you can identify fractions in-line with this novel approach to real-time molecular tracking. DON’T JUST DO YOUR PROCESS. KNOW YOUR PROCESS. Features & Details Arometrix Sensor Uniquely built to attach directly to glassware in seconds Connects and transmits to the high-quality monitor Plug and play – instantaneously analyzes the mixture flowing through the processing machine Available in two sizes: size 29 (fits 28-30mm OD glass) and size 34 (fits 31-34mm OD glass) Available with ultra-sensitivity as an add-on (10X increase in sensitivity) Arometrix Monitor Collects and displays real-time molecular data in-line throughout the process High-quality, high-resolution touch screen Compatible with all Arometrix sensors Key Software Features Molecular Viewing – View up to 3 molecules simultaneously via two different graphing options Intensity Values – Observe numeric molecular intensity levels that correlate with potency Data Logging – Record run data for traceability in our data review app Software Updates – Upgrade to new software releases easily from the field Lack of objectivity during fractional distillation Botanical processors don’t know their product’s quality until after the process is over. This is because traditional molecular analyzers are hardware-hungry and can’t be utilized in-line, but rather, after the process for sample testing. During the process, processors are forced to rely on subjective techniques, such as eyesight, experience, and guesswork, and indirect techniques like temperature. This lack of analytical tools during the processing leads to human error and “bad” batches. Now, you can forget the old ways of manually ‘finding fractions’. The FRACTION FINDER product line will improve the quality, consistency, and value of processed botanicals. Make smarter decisions based on data Arometrix’s disruptive solution is the patented FRACTION FINDER. Processors refer to it while they are operating to view current process status and undertake corrective actions if needed. By using the Fraction Finder in tandem with existing laboratory and processing techniques, you’ll have a wealth of additional information on which to base decisions. For example, the data will tell you when to change your distillation collection flasks so that the different fractions are more optimally separated. The main fractions are “heads”, “bodies”, and “tails”. Knowing exactly when each fraction starts helps you to determine optimal flask transfers for precise and repeatable separation of fractions. Additionally, this technology is great for rapidly training novice technicians on the process, or standardizing distillations across a large facility. Applicable processes for this model includes small, benchtop, and industrial distillation process, including short path distillation, thin film distillation, and wiped film evaporation / distillation, and chromatography / isolation. Powered by fluorescence spectroscopy The AROMETRIX technology utilizes a principle known as fluorescence spectroscopy, a branch of science concerned with measuring molecules based on how they interact with light. The technology uses a spectrum of wavelengths over time to determine the relative purity of oils flowing through a glass condenser or sight glass. This technique paves the way for precision and repeatability, which will yield a more consistent product over time. Product Details Included in this package: Arometrix Monitor Arometrix Fraction Finder Sensor Light-Blocking Tape Power Supply 3″ Sensor Cable Pole-Mounting Clamp User Manual Quick Start Guide 1-Year Warranty Compliance: ROHS CE
$7,443.56 - $8,826.35
Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled
Polyscience 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Description: 1.5 HP Chiller, Positive Displacement Pump; Air-Cooled Display: LED Connectivity: Optional: RS232, RS485 Working Temperature Range °C: 5° to 35° Temperature Stability °C: ±0.5° Temperature Calibration Capability: 1-point Pump Type: Positive Displacement Key Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available Common Specifications Working Temperature Range °F 41° to 95° Working Temperature Range °C 5° to 35° Reservoir Capacity (gallons) 3.5 Reservoir Capacity (liters) 13.25 Reservoir/Tank Material Polyethylene Reservoir Cover Screw-on Cap Cleanable Air Filter Yes Cleanable Fluid Filter Yes Temperature Stability °F ±0.9° Temperature Stability °C ±0.5° Display LED Display Resolution (Read) 0.1 Pump Type Positive Displacement Process Connections 1/2" (F) NPT Over-Temperature Protection / Failsafe Heater Control Yes Reservoir Liquid Level Indicator Yes Reservoir Drain Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 30.5 x 19 x 26 in Overall Dimensions (L x W x H) (cm) 78 x 48 x 66 cm Compressor Size (HP) 1.5 Refrigerant R134a Shipping Weight (pounds) 340.0 Shipping Weight (kilograms) 154.0 Catalog Page Number 104 Hz (Hertz) 60 Hz Only 50 Hz Only Part Number 6860P46A270D 6850P46A270E Maximum Pressure (psi) 100.0 83.0 Maximum Pressure (bar) 6.90 5.72 Maximum Pressure Flow Rate (gpm) 3.50 2.90 Maximum Pressure Flow Rate (l/min) 13.2 11.0 Cooling Capacity @ +10°C (W) 4420 3715 Cooling Capacity @ +20°C (W) 5200 4371 Cooling Capacity @ +30°C (W) 5980 5027 Heater Wattage 1000 1000 Electrical Requirements (VAC/Hz/Ph/A) 230/60/1/21.1 240/50/1/20.8 Regulatory Approvals TUV CSA, CUL, CE
$14,662.39
You have seen 222 out of 222 products