The spark-proof motor has the same features as our other pumps with the addition of spark-free, dual voltage operation. For use with A2L refrigerant gases such as R32 and 1234yf.
JB Industries’ PLATINUM® series vacuum pump is the best pump in the industry. Designed for the serious air conditioning and refrigeration technician, the PLATINUM® vacuum pump features a gas ballast and blank off valve. American made and subjected to JB’s rigorous performance standards, the PLATINUM® Series is the top of the line for both quality and durability.
Backed by an unprecedented 24 month over-the-counter warranty, there is no better pump on the market. Because each PLATINUM® pump is made at our facility in Aurora, Illinois, quality and dependability are woven in with hard working American pride. Completely field repairable, our PLATINUM® series is designed to last.
DV-200N Features:
- 1/2 HP, 1725/1425 RPM capacitor start motor with thermal overload protection
-
1/2” x 1/4" x 3/8” intake port
-
Voltage 115 Hertz 60
-
Standard US 110 Volt plug
-
21 ounce (680 cc) oil capacity
-
Gas ballast increases and keeps oil cleaner
-
2 stage direct drive to achieve deep 15 micron vacuum
-
Check valve prevents oil back flow during power failure
-
Low profile rocker switch
-
Lift ring to hoist
-
Tethered safety cap prevents oil spills during transport
-
1/2" NPT break resistant handle encompasses exhaust
-
Lighter weight finned aluminum housing reduces heat during operation
-
Well-protected drain valve sealed with O-ring to prevent leaks
-
All metal construction including all brass fittings
-
Completely field repairable
-
UL Recognized
-
Made in the USA
Pump Warranty Information
Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the shatter vac vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™)
If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
