New Hydro Products
EZ-Clone - Low Pro 64 Site Cutting System, White
The new EZ-CLONE® Low Pro 64 White has been made from fully recyclable HDPE which is highly chemical-resistant and extremely durable. It now has a leak-resistant cord outlet that allows multiple cords. It also has a specially designed recessed drain that allows it to be highly protected and gives the ability to easily tip the unit for draining
$544.82$439.95
EZ-Clone - Low Pro 32 Site Cutting System, White
EZ-Clone® is proud to announce the introduction of the brand new 32 Site Low Pro System now in white. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of EZ-Clone's larger systems.
$391.22$315.91
EZ-Clone - Low Pro 32 Site Cutting System, Black
EZ-CLONE is proud to introduce the brand new 16 and 32 Site Low Pro Systems. It is manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller Systems utilize the same great Aeroponic Misting Technology as all of our larger systems. Designed recessed drain that allows it to be highly protected Easily tip the unit for draining Highly chemically resistant and extremely durable
$383.57$309.74
EZ-Clone - Low Pro 16 Site Cutting System, White
EZ-Clone® is proud to announce the introduction of the brand new 16 Site Low Pro System now in white. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of EZ-Clone's larger systems.
$255.00$205.92
EZ-Clone - Low Pro 16 Site Cutting System, Black
EZ-CLONE is proud to introduce the brand new 16 and 32 Site Low Pro Systems. It is manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller Systems utilize the same great Aeroponic Misting Technology as all of our larger systems Designed recessed drain that allows it to be highly protected Easily tip the unit for draining Highly chemically resistant and extremely durable
$250.03$201.90
EZ-CLONE 128 Site System Manifold, Black
The new and improved EZ-CLONE Classic Manifold is better than ever. With individually sized manifolds for each system size of the EZ-CLONE Classic Line. Optimal spray coverage is achieved with precise mister placement. Made from highly durable PVC plastic, these manifolds are ultrasonically welded during the manufacturing process to create the strongest bond possible which protects against splitting. Pair these with our EZ-CLONE 360-degree misters for an unrivaled combination. Proprietary design. Molded, durable ABS plastic Creates a thorough and even aeroponic mist Specially designed for each size system (spray nozzles shown in photo are not included) Molded, durable ABS plastic Creates a thorough and even aeroponic mist Specially designed for each size system
$76.70$69.32
EZ-Clone - Low Pro 128 Site Cutting System, White
EZ-CLONE has once again reinvented itself and is proud to announce the introduction of its newest creation, the LOW PRO 128 CLONING SYSTEM. Now available in white, it is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings, and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent any possible tipping. It also includes four different Colored Cloning Collars, and a sample set of new EZ-COCO Cloning Collars.
$704.65$569.00
ExHale CO2 - The Original CO2 Bag
The Original ExHale CO2 Bag produces CO2 24 hours a day with no need to refill bottles or use expensive CO2 production units. The power of ExHale lies in the mycelial mass inside the vented bag. This mycelial mass produces CO2 and the microporous breather patch releases CO2 continually for at least 6 months. On average our CO2 bags will raise the CO2 level by 500 ppm above ambient air levels. The Original ExHale CO2 Bag is designed for small to medium sized grow spaces. The Original will provide a 4x4 foot or 128 cubic foot space with CO2 for 6 months guaranteed. The ExHale Original comes with a freshness seal that doubles as a hanger. Steady supply of CO2 for 6 months guaranteed Maintenance free No heat No electricity Patent pending genetics Suitable for Organic Production Made in the USA How to Use ExHale ExHale comes complete, simply follow the instructions and place the ExHale bag in your grow space and leave it alone to do its job. A continuous shower of CO2 directly onto your plants is the most efficient way to deliver CO2. Placing the ExHale CO2 Bag slightly above the level of your plants will ensure they receive the CO2 they need 24 hours a day for up to 6 months. ExHale can be used in both cycles of plant growth (Vegetative & Flower)
$48.23$45.69
Snow Storm Ultra
This amino acid based product tricks the plant into thinking it's heat stressed. The result is intense resin, fragrance and flavor production plus the well-known "frosted" look that growers love. Emerald Triangle separated the Snow Storm from Purple Maxx and optimized it. No carbohydrates or sugar water. This is the real deal. An honest, one-of-a-kind product. The name says it all! Amino acid based product tricks the plant into thinking it is heat stressed Results in intense resin, fragrance, and flavor production Contains no carbohydrates or sugar water
$234.40$187.36
Emerald Triangle Killer Tea
Made from pure worm castings and the highest quality potent seabird and bat guanos. The species of worm is critical for a high potency casting and the best by far is derived from African worms. No product on the market compares. Long shelf life, no need to aerate and NO DISGUSTING SMELL. Use as is or add molasses and aerate to make an extremely potent bloom finishing tea. GREAT for flushing. Highly concentrated and all natural—over 2 years spent sourcing and testing ingredients in order to get it just right. NOT JUST ANOTHER TEA!!!!! This product is also available in 15 gallon, 30 gallon, and 55 gallon drums. Made from pure worm castings and the highest quality potent seabird and bat guanos Makes an extremely potent bloom finishing tea Long shelf life, but no need to aerate and no disgusting smell
$224.46$175.87
G10 Gravitation #10
G10 (Gravitation #10) started as Emerald Triangle's experimental substitute for Gravity but turned into something else. They have taken their original proprietary kelp extract to the next level. It's not Gravity—it's something MORE! Use with Sonic Bloom and Killer Tea for maximum finish.
$269.92$220.32
Crystal Burst
One of the most potent liquid PK Boosts on the market. 50% stronger than the most popular brands on the market yet it costs the same! PLUS a healthy dose of Vitamin B1 to help relieve stress caused by high performance bloom regimens. Induces flowering and stimulates resinous oil and fragrance production in many flowers and medicinal herbs. Works well with all popular nutrient lines. This product is also available in 15 gallon, 30 gallon, and 55 gallon drums. One of the most potent liquid PK boosts on the market 50% stronger than most popular brands, yet it costs the same Also has a healthy dose of Vitamin B1 to relieve stress in high performance bloom regimens
$42.61$40.22
Dyna-Gro K-L-N
K-L-N Concentrate contains rooting hormones IBA and NAA. Promotes root growth in trees, foliage, and flowering plants. For propagating cuttings, air layering, and transplanting drench for bare-root stock, and newly potted plants. Use as a drench, dip, or mist.
$16.25
Dosatron Nutrient Delivery System - Mixing Chamber
A well-blended solution is key to a successful dosing system. A must have! One way to get that homogenized blend is to add a mixing chamber to the Nutrient Delivery System. Kit includes mixing chamber, unions, nipples, and roll of Teflon tape. This is for a 1-1/2 in system. Assembly required.
$155.14
Dosatron Dilution Solutions Nutrient Delivery System Nutrient Monitor Kit
Dilution Solution’s Nutrient Delivery System (NDS) includes the Starter Kit, Mixing Chamber Kit, Monitor Kit, and Water Hammer Arrestor Kit. The Monitor Kit provides an in-line nutrient monitor that measures and displays your well-blended, outgoing solution, providing peace of mind.
$1,609.65$1,524.86
Dosatron Flow Restrictors 3/4 in
Flow Restrictors limit the flow of liquid in the line. It is recommended to install a flow restrictor on the inlet side of the Dosatron unit if there is any possibility of overflowing the unit. Choose from 3/4 in 10 GPM (FR34-10GPM) or 3/4 in 14 GPM (FR34-14GPM).
$102.03$99.15
Dosatron Etatron eOne Micro-Dosing Pump - Assembled Panel
The eOne MF is a multifunction microprocessor dosing pump, suitable for applications which require proportional dosing. The pump operates at a dosing frequency up to 180 impulses/minute, and is equipped with backlit graphic display for correct setting of the various programming parameters. It has a flow rate of 0.26 gph and a max pressure of 1.45 psi. Included eOne MF 0110 pump, polyethylene panel, PVC suction tube, PVC priming discharge tube, polyethylene discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter and mixing chamber. Choose the size and orientation that works best for your set up.
$3,193.71$2,874.07
Dosatron Nutrient Delivery System 1-1/2 in End Kit - NO Monitor
Dosatron’s Nutrient Delivery System (NDS) includes the Starter Kit, Mixing Chamber Kit, Monitor Kit OR End Kit, and Water Hammer Arrestor Kit.
$736.62$623.71
Dosatron Replacement 3/4 in Check Valve
The Dosatron CV34-PH check valve features a poly construction and is for use with Dosatron viton seal units requiring a 3/4" connection.
$84.52$75.82
Dosatron Water Powered Doser 14 GPM 1:100 to 1:10 - 3/4 in
The Dosatron water powered doser inject nutrients, supplements/additives and pH adjusters into irrigation water with ease. Dosatron is a passive precision fertilizer doser that accurately mixes from the pressure of your incoming water (no electricity needed). The water pressure forces the solution downstream. Operating pressure range is 7 -85 PSI and water flow range is 0.05 - 14 GPM. Injection capabilities of 1:100 to 1:10 (1 to 10%) [1.280 to 12.800 ounces per gallon]. Unit has 3/4 in NPT connections. Includes mounting bracket, suction hose, bypass, union, weighted strainer, and quick start guide. Mini-maintenance seal kit for Dosatron Dosers - should be replaced on an annual basis.
$1,577.23$1,513.03
Dosatron Water Powered Doser 11 GPM 1:500 to 1:50 - 3/4 in
Dosatron water powered doser is directly installed in the water supply line. The Dosatron operates by using water pressure as the power source (no electricity needed). The water activates the Dosatron, which takes up the required percentage of concentrate. Inside the Dosatron, the concentrate is mixed with the water. The water pressure forces the solution downstream. Operating pressure range is 4.3 -85 PSI and water flow range is 0.05 - 11 GPM. Injection capabilities of 1:500 to 1:50 (0.2 to 2%) [0.256 to 2.560 ounces per gallon]. Unit has 3/4 in NPT connections. Includes mounting bracket, suction hose, bypass, union, weighted strainer, and quick start guide. Mini-maintenance seal kit for Dosatron Dosers - should be replaced on an annual basis.
$800.55$766.48
Dosatron Water Powered Doser 11 GPM 1:1000 to 1:112 - 3/4 in
Inject nutrients, supplements/additives and pH adjusters into irrigation water with ease. No electricity needed. Dosatron is a passive precision fertilizer doser that accurately mixes from the pressure of your incoming water. Operating pressure range is 4.3 -85 PSI and water flow range is 0.05 - 11 GPM. Injection capabilities of 1:1000 to 1:112 (0.1 - 0.9%) [3.5 ml to 35 ml per gallon]. The unit has 3/4 in NPT connections. Includes mounting bracket, suction hose, bypass, union, weighted strainer, and quick start guide. Mini-maintenance seal kit for Dosatron Dosers - should be replaced on an annual basis.
$1,207.43$1,149.78
Dosatron 1 1/2 in Filter with 200 Mesh Screen
Dosatron 200 Mesh Filter installs on the inlet side of the Dosatron injector to keep the system free of debris.
$521.01$416.68
Dosatron Replacement 1 1/2 in Check Valve
The Dosatron CV112 check valve features a poly construction and is for use with Dosatron viton seal units requiring a 1 1/2" connection.
$61.79$55.58
STACK!T - 28 Clip Stainless Steel Drying Rack
Professional growers know the ideal position for drying their prized harvests: Hang them vertically! This hanging rack features all stainless steel construction. Hangs plants vertically for even drying Maintains flower shape for maximum visual appeal and aroma Sturdy stainless steel clips can hold heavy harvest—up to 0.8 lbs per clip (22.4 lbs total) The outer frame measurements are 13.5” x 19.75”, and each stainless steel clip is 2.3” in length.
$34.18$34.03
STACK!T - Drying Rack w/Zipper, 2 ft, Flippable
Breathable mesh allows for maximum air circulation so flowers and herbs dry fast! Six individual drying chambers zip shut to protect your harvest. Collapses flat for storage in the handy zippered case. Breathable mesh for quick drying of flowers & herbs Zippered side walls protect your harvest Includes 6 trays - 10" tall x 24" diameter Easy to hang with included carabiner clip and hook-and-loop fastener loops U-shaped zipper openings Hanging loops at top and bottom so you can flip entire unit for faster drying Includes: 6 - 24" mesh trays with zippered openings Carabiner clip for hanging Storage case Measures 6 feet tall when fully extended
$54.78$51.77
Anden Grow-Optimized Industrial Dehumidifier, 320 Pints/Day 277v
320 Pints Per Day, 277VAC. Anden A320V3 Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth potential Better. Removes up to 2.6 liters per kilowatt hour, for maximum energy efficiency.Faster. Reaches maximum performance in under 3 minutes for maximum moisture removal.Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics. Anden advanced features: Self-sealing air filter for efficient protection of components; with easy access for replacement Included hanging kit doubles as lifting handles, provides easy, flexible installation Pre-installed electrical plug is easily removable for hard wired application, providing flexible installations Float switch terminals for easy set-up 76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks. A320v3 SPECS: Capacity: 320 PPD Energy Factor: 2.6 L/kWh - 5.5 pints/kWh Voltage: 208–240VAC, 1 Phase, 60 Hz BTU: 4,156 Current draw (amps)(1): 9.1 Power (watts)(1): 2,309 Weight: 180 lbs. Width: 32⅝"- Height: 24"- Length: 24¼" Warranty: 5 Years on all parts INCLUDED ITEMS: Dehumidifier Filter Hanging Brackets A76 Control Drain Fittings Drain Tubing Thermostat wire Drain Trap Screw Driver
$6,211.05
Anden Grow-Optimized Industrial Dehumidifier, 320 Pints/Day 240v
320 Pints Per Day, 208-240VAC. Anden A320V1Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth potential. Better. Removes up to 2.9 liters per kilowatt hour, for maximum energy efficiency.Faster. Reaches maximum performance in under 3 minutes for maximum moisture removal.Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics. Anden advanced features: Self-sealing air filter for efficient protection of components; with easy access for replacementIncluded hanging kit doubles as lifting handles, provides easy, flexible installationPre-installed electrical plug is easily removable for hard wired application, providing flexible installationsFloat switch terminals for easy set-up76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks. A320v1 SPECS: Capacity: 320 PPD Energy Factor: 2.9 L/kWh - 6.0 pints/kWh Voltage: 208–240VAC, 1 Phase, 60 Hz BTU: 4,156 Current draw (amps)(1): 11.1 Power (watts)(1): 2,309 Weight: 180 lbs. Width: 32⅝"- Height: 24"- Length: 24¼" Warranty: 5 Years on all parts INCLUDED ITEMS: Dehumidifier Filter Hanging Brackets A76 Control Drain Fittings Drain Tubing Thermostat wire Drain Trap Screw Driver
$6,211.05
Anden Grow-Optimized Industrial Dehumidifier, 210 Pints/Day 240v
210 Pints Per Day. Anden A210V1 Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth potential. Better. Removes up to 3 liters per kilowatt hour, for maximum energy efficiency.Faster. Quickest commercial dehumidifier to reach peak power for maximum moisture removal.Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics. Anden advanced features: Positive pressure drain allows proper drainage without the need for a drain trap, providing for trouble free operation Self-sealing air filter for efficient protection of components; with easy access for replacement Included hanging kit doubles as lifting handles, provides easy, flexible installation Pre-installed electrical plug is easily removable for hard wired application, providing flexible installations Float switch terminals for easy set-up 76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks. 210V1 SPECS: Capacity: 210 PPD Energy Factor: 3.0 L/kWh / 6.3 pints/kWh Voltage: 208–240VAC, 1 Phase, 60 Hz BTU: 2,036 Current draw (amps)(1): 7.15 Power (watts)(1): 1,487 Weight: 118 lbs. Width: 19½" - Height: 18¾" - Length: 30⅛" Warranty: 5 Years on all parts INCLUDED ITEMS: Dehumidifier Filter Leveling Feet Hanging Brackets A76 Control Drain Fitting Drain Tubing Thermostat wire Screw driver
$5,026.36$4,435.01
Anden Steam Humidifier w/Fan Pack and Digital Humidistat
Anden Steam Humidifier w/Fan Pack and Digital Humidistat The Anden model AS35FP is a high capacity electrode-type humidifier which runs independently of your HVAC system. The humidifier is capable of between 11.5 and 34.6 gallons per day, providing humidity to grow rooms up to 6,200 square feet. Running on cold water, the Anden AS35FP generates steam by energizing the two electrodes in the steam canister. Current flowing in between the electrodes causes the water to boil, creating steam. Steam is delivered into the grow/drying room via the Fan Pack. The modulating control will vary the Modulating Steam Humidifier’s output based on the difference between the set point and actual RH. When the RH set point is reached the humidifier stops producing steam and continues to energize the fan in the fan pack for 2 minutes to push any residual steam out into the grow/drying room. The Anden AS35FP has many advanced safety and operational features: Internal Control Board: Manages the complete operation of the humidifier. Fills and drains to maintain proper amperage draw, water level and notifies when service is required. Back Flow Protection : Air gap in the fill cap prevents pressure built up. Water Level Sensor : Manages the water level in the steam canister to prevent overfilling. Automatic Drain and Fill Cycle : Unit flushes and fills periodically to maintain the proper conductivity. Drain Water Tempering : Unit uses cold inlet water to temper the canister water reducing the drain water temperature below 140°F to protect PVC piping and condensation pumps. End-of-Season Drain : After a 72-hour period with no call for humidity the humidifier will drain the water from the canister. Unit will remain in stand-by until next call for humidification. Operating Time Monitor: Accumulates actual humidifier run time to activate periodic drain and fill cycles, end-of-season drain function and monitors the life of canister. A simple display panel provides the power switch for on/off operation and illuminated LEDs to show fill, drain, steam operations, and diagnostics. Maintenance is a breeze, no cleaning or scrubbing required. Simply remove the factory installed canister and replace. Each unit delivers the necessary humidity needed during early growth cycles all the way through harvest. As a steam model, the AS35FP complements non-forced air heating sources and other specialty heating systems. It requires installation by a local HVAC professional. 19.49"W x 19.36"H x 30.07"D The Model AS35FP includes: The Steam Humidifier Fan Pack Model 5558 Control Model 4028 Drain trap assembly 6' steam hose 10' drain tubing
$2,209.37$1,949.45
Anden Replacement MERV 11 Air Filter
Replacement MERV 11 Media Filter for model A200V1, A300V1 & A300V3. After initial installation, the MERV 11 air filter should be replaced every 6 months. Remove the filter access panel to remove and replace the filter. 6 Filters Per Carton
$48.94
Anden Hanging Kit for Model A130
The 5691 hanging kit is designed for use with Anden model A130 industrial dehumidifiers with a total safe working load of up to 400 pounds. The rugged suspension bars are created from 14-gauge zinc plated steel and include 10-foot cables with cripple clamps and 3.5" bolts. Kit also includes: ¼" thick neoprene pads for vibration isolation, 4 washers, 4 hex nuts, and a gripple key for installation.
$255.53
Anden Hanging Kit for Models A70 & A95
The 5660 hanging kit is designed for use with Anden models A70 & A95 industrial dehumidifiers with a total safe working load of up to 400 pounds. The rugged suspension bars are created from 14-gauge zinc plated steel and include 10' cables with cripple clamps and 3.5" bolts. Kit also includes: ¼" thick neoprene pads for vibration isolation, 4 washers, 4 hex nuts, and a gripple key for installation.
$249.36
Anden Dehumidifier Pump Kit Accessory
The Anden 4856 Dehumidifier Pump Accessory Kit provides a simple solution to empty excess water from the unit. The Dehumidifier Pump Kit will provide a quick burst of pumping action when the water reaches a certain point in the pumps well area. The Pump Kit pumps the water up a hose and out to wherever you route the hose to. The Anden 4856 Dehumidifier Pump Kit Accessory includes a low profile condensate pump and a 20' drain tube.
$156.01
Anden Digital Dehumidifier Control (For All Anden Dehumidifiers)
The Model A76 Digital Dehumidifier Control communicates with your Anden dehumidifier, allowing you to control the operation of the unit from a distance. Using an onboard sensor, the Model A76 Dehumidifier Control monitors the relative humidity in the space in which it is located and displays the measured relative humidity on the digital display. This is a wired control unit that must be hardwired to your dehumidifier. The Model A76 digital control can also be used as a communicating remote control for your dehumidifier, allowing you to set the relative humidity level for your grow room and control your Anden dehumidifier from a convenient living or working space location. This makes it easy for you to control your Anden dehumidifier if it is located in an inconvenient or hard to access area.
$178.55
Anden Industrial Dehumidifier, 130 Pints/Day
Grow environments require high-capacity, specially-designed dehumidifiers to control humidity and protect crops. The Anden Model A130 delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop. The Model A130 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control• Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module• Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820)• Control and monitor climate conditions in your grow room 24/7/365 from anywhereOptional Hanging Kit – DH35660 (Model 5691) Features: Control: Built-in digital control with display Control mounting option: Field interchangeable from top to front Cabinet insulation: ½" EPS Air discharge orientation: Top or end Inlet/Outlet duct collars: 10" diameter Backdraft damper at outlet: Included Filter Washable: MERV 8 Refrigerant: R410A Coil type: E-coated Power cord length: 8' Discharge air temperature rise 10°F–30°F Drain connection: ¾" MNPT threaded Moveable with casters Warranty: 5 years
$2,730.66
Anden Industrial Dehumidifier, 70 pints/day
For hobbyists or smaller grow operations, the Anden Industrial Dehumidifier Model A70 is the perfect solution. Small, efficient and reliable, the A70 removes an impressive 70 pints per day of moisture from the air. Your crop’s quality is essential and the A70 was designed with healthy crops in mind. Trust the professional brand with solutions built specifically for indoor growing environments. The Model A70 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control• Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module• Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820)• Control and monitor climate conditions in your grow room 24/7/365 from anywhere Optional Hanging Kit – DH35660 (Model 5660) Features: Control: Front mount only Air discharge orientation: End of cabinet only Duct collars: 8" Backdraft damper: No Filter: ½" MERV 8 washable Refrigerant: R410A Coil type: Aluminum Power cord length: 8' Hardwire option: No Discharge air temperature rise: 10°F–30°F Drain connection: ¾" MNPT Threaded
$2,051.33
Anden Dehumidifier, Movable, 130 Pints/Day
Grow environments require high-capacity, specially-designed dehumidifiers to control humidity and protect crops. The Anden Model A130 delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop. The Model A130 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control • Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - Dh28082 (Model 8082) Temperature/Humidity Sensor Module • Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820) • Control and monitor climate conditions in your grow room 24/7/365 from anywhere Features: No assembly, plug and play Moveable with casters & built in handles for easy maneuvering Control: Built-in digital control with display Cabinet insulation: ½" EPS Filter Washable: MERV 8 Refrigerant: R410A Power cord length: 8' Discharge air temperature rise 10°F–30°F Drain connection: ¾" MNPT threaded Warranty: 5 years Designed Engineered & assembled in Wisconsin Removes up to 130 pints of moisture per day Specs: Capacity: 130 PPD Energy Factor: 2.9 L/kW-h (6.1 pints/kWh) BTU/h: 9,375 Power (Watts): 900 Watts Voltage, phase, frequency: 120VAC, 1, 60 Hz Current draw: 8.3 Amps Noise: 60 dBA Dimensions: 12.5” W X 14.5” H (17” w/casters on) X 27.5 L Weight: 70 lbs Drain Connection: ¾” MNPT Threaded Filter: Disposable MERV 11 Refrigerant: R410A Coil Type: Aluminum Warranty: 5 Years on all parts including refrigeration system. Included Items: Drain Fitting: ¾” MPT x ¾” barbed 10 ft. Drain tubing: ¾” ID Manual: Installation instructions & Owner’s manual
$2,730.66
Doktor Doom total Release Fogger
Total Release Foggers are for use in greenhouses, fruit and vegetable storage areas and indoor gardening areas. Used for controlling fungus gnats, spider mites, two-spotted spider mites, aphids, whiteflies, scale, mealy bugs and thrips. No residuals.
$22.72$22.46
Doktor Doom Spider Mite Knockout 16 oz
Spider Mite Knockout has a high concentration of the naturally-occurring insecticide pyrethrin, used to control aphids, spider mites, whiteflies, leafhoppers, Japanese beetles, and more. Can be used indoors and out; safe to apply on food crops up to one day before harvest. Spider mite knockout spray High concentration of the naturally occurring insecticide Pyrethrin Used to control aphids, spider mites, whiteflies, leafhoppers, Japanese beetles, etc Can be used indoors and outdoors Safe to apply on food crops up to one day before harvest
$30.37
CAN-A-WIPES Cleaning Wipes, pack of 30
Annihilate odors from hands and skin such as diesel, gasoline, and fish smells. Cut right through gardening resins stuck to your manicuring tools! Destroy coffee and red wine stains! Remove caulking, permanent marker, and grease from tools.This unique cleaning solution combined with CAN-A-WIPES durable towelette causes grease and dirt cling to the wipe assuring it does not transfer back to the hands or surface. No more smears on the surface. The wipe lifts it off and embeds it into the towel. CAN-A-WIPES is not any ordinary wipe! Hand CleanserA ready-to-use cleaning wipe, NO WATER NEEDED! Just wipe and go. You can clean up anywhere! Unlike other wipes, CAN-A-WIPES does not dry out your skin. These wipes have a great clean scent and softens the hands rather than leaving them dry and cracked since they contain 4 skin conditioners including glycerin, lanolin, aloe, and vitamin E. These wipes are TOUGH—NOT ROUGH! CAN-A-WIPES are great for: Painters Cement masons Commercial fisherman Motorcycle shops Any manufacturing plant Mechanics Plumbers Landscapers Agriculture/Farmers Florists CAN-A-WIPES will remove from your hands with one towel: Black Jack roofing cement and urethane sealants. People who work with these products say that can never get it off—it just has to wear off their hands—not anymore with CAN-A-WIPES! Permanent markers Grease Cement powders—keep your hands from drying, cracking and bleeding in most cases The faster the job gets done, the greater the profit! The perfect solution for your industry, let CAN-A-WIPES do your dirty work!
$16.98$15.95
Lock & Seal 5' Extension
We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.
$16.32$15.24
Active Air CO2 regulator Inlet washer
Active Air washer O-ring for CO2 regulator inlet (replacement o-ring used where the regulator meets your CO2 tank for a tight seal). Replacement part O-ring for CO2 regulator Where the regulator meets the tank
$1.95$1.83
Active Air CO2 tubing
Active Air CO2 Drilled Tubing. Use with CO2 regulator and tank to evenly distribute CO2 to your grow area and plants. CO2 tubing High quality
$21.96$21.68
Cut Kit Tray, White, 11" x 21"
Also known as a flat, the cut kit tray is ideal for seed and cutting propagation. Combined with our mesh insert, the cut kit tray makes cube draining a simple and mess-free process. Features 21" x 11" x 2½" No holes 100% virgin high quality material 90 mm thickness White plastic for increased reflectivity Ideal for seed and cutting propagation White plastic for increased reflectivity 100% virgin high quality material
$4.67$4.60
Cut Kit Tray, 10" x 20" I.D.
Also known as a flat, the cut kit tray is ideal for seed and cutting propagation. Combined with our mesh insert, the cut kit tray makes cube draining a simple and mess-free process. Features 21" x 11" x 2½" No holes Reuseable Ideal for seed and cutting propagation Combined with our mesh insert, the cut kit tray makes cube draining a simple and mess-free process 21 x 11 x 2½ No holes Reuseable
$4.22$3.91
Cut Kit Tray, 10" x 20", w/Mesh Tray, case of 50
This kit includes a tray and mesh tray, ideal for watering and draining young plants and cuttings. Heavy duty and reusable. Measures 10" x 20" x 2.5" Kit includes a tray and mesh tray Ideal for watering and draining young plants and cuttings Heavy duty plastic construction 10 inch x 20 inch x 2 1/2 inch Durable and reusable
$273.63$215.49
Mesh Tray, 10" x 20"
Ideal for watering and draining cuttings and new plants. Features Nests completely in Hydrofarm CKTRAY and most standard nursery trays Unique mesh bottom keeps plants stable Strong, durable plastic lasts for many season
$3.57
You have seen 528 out of 633 products