***Note: Butane(Solvent) not included with systems unless ordered with drop-down menu or separately. Any order with butane WILL NOT SHIP EXPEDITED.
***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.
***NOTE: This unit requires a chiller or circulation system.
The Icarus 8.5LB True Dewax Bidirectional Closed Loop Extractor
Butane Extraction System
(System comes with 1 yr. limited warranty)
The Icarus unit shares the same functionality as the standard Bi-directional with the convenience of rack-mounted columns. The Bi-directional solvent input provides a complete material saturation. The oil-bearing solvent advances into a sleeved spool chilled with dry ice for further filtration. Freezing the solution will coagulate the waxes and lipids, causing them to crash out, leaving you with purified oil in the collection base.
Extractor Configurations:
Explorer: The standard true dewax extractor model has a welded collection base and a carbon steel LP tank.
Professional: The Professional series features a stainless steel LP tank with larger bore valves and 3/8-inch hoses, increasing recovery rates. The collection base has a removable bottom for an easier extract pour.
Elite: The Elite series comes equipped with the same features as the Professional model with American-made instrumentation valves by SSP. The collection base has an outer liquid jacket that permits precision heating during recovery. Paired with a heated circulator* eliminates the need for a hot water bath. Active recovery: BVV's 4-cylinder recovery pump kit with 1/2-inch JIC hoses. An active recovery kit reduces the amount of dry ice needed.
*NOTE* This model requires a heater circulator or chiller *NOTE*
Explorer
Professional
Elite
BVV 316SS Full Bore Valves
Welded Bottom Recovery Base
BVV 316SS Full Bore Valves
Splatter Platter Recovery
Stainless Steel Butane Storage Tank
3/8" Recovery lines
SSP Valves
Water Jacketed Recovery
Jacketed Stainless Steel Butane Storage Tank
BVV 4 Cylinder Butane Pump
1/2" Max Bore Recovery lines
Key Features:
304 Stainless Steel construction
37° JIC Stainless Steel PTFE hosing
BUNA-N tri-clamp gaskets
6”x 36” rack-mounted material column
8"x36" Dewax column
Multistage filter stack system
Double jacketed collection base with locking wheels
Operating Temperature Range: -40C (-40F) to 72C (160F)
Ultimate Vacuum: as low as 10 Microns
Base unit Maximum Capacity: 1301 cubic inches, (21.323 Liters)
Construction: All components made of 304& 316 Stainless Steel.
Intake Fittings: JIC 37 Degree Vacuum Fittings
Max Vacuum -29.9inHg
High Polish Interior base
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Cylinder Volume
Select Material
How Much Will Fit in Cylinder
Formula Volume x Weight of Water x Specific Gravity
Constants Weight of Water = 0.0360 (lbs / in3) Specific Gravity of =
Account for an 80% fill to avoid a hydraulic lock
How Much Material Will Fit in the Cylinder
Packing Density (g)
2.5
3
3.5
4.3
Grams of Material
Lbs. of Material
The Icarus 8.5LB True Dewax Bidirectional Closed Loop Extractor
***Note: Butane(Solvent) not included with systems unless ordered with drop-down menu or separately. Any order with butane WILL NOT SHIP EXPEDITED.
***DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. Check with your local fire marshal for guidance when operating indoors.
***NOTE: This unit requires a chiller or circulation system.
The Icarus 8.5LB True Dewax Bidirectional Closed Loop Extractor
Butane Extraction System
(System comes with 1 yr. limited warranty)
The Icarus unit shares the same functionality as the standard Bi-directional with the convenience of rack-mounted columns. The Bi-directional solvent input provides a complete material saturation. The oil-bearing solvent advances into a sleeved spool chilled with dry ice for further filtration. Freezing the solution will coagulate the waxes and lipids, causing them to crash out, leaving you with purified oil in the collection base.
Extractor Configurations:
Explorer: The standard true dewax extractor model has a welded collection base and a carbon steel LP tank.
Professional: The Professional series features a stainless steel LP tank with larger bore valves and 3/8-inch hoses, increasing recovery rates. The collection base has a removable bottom for an easier extract pour.
Elite: The Elite series comes equipped with the same features as the Professional model with American-made instrumentation valves by SSP. The collection base has an outer liquid jacket that permits precision heating during recovery. Paired with a heated circulator* eliminates the need for a hot water bath. Active recovery: BVV's 4-cylinder recovery pump kit with 1/2-inch JIC hoses. An active recovery kit reduces the amount of dry ice needed.
*NOTE* This model requires a heater circulator or chiller *NOTE*
Explorer
Professional
Elite
BVV 316SS Full Bore Valves
Welded Bottom Recovery Base
BVV 316SS Full Bore Valves
Splatter Platter Recovery
Stainless Steel Butane Storage Tank
3/8" Recovery lines
SSP Valves
Water Jacketed Recovery
Jacketed Stainless Steel Butane Storage Tank
BVV 4 Cylinder Butane Pump
1/2" Max Bore Recovery lines
Key Features:
304 Stainless Steel construction
37° JIC Stainless Steel PTFE hosing
BUNA-N tri-clamp gaskets
6”x 36” rack-mounted material column
8"x36" Dewax column
Multistage filter stack system
Double jacketed collection base with locking wheels
Operating Temperature Range: -40C (-40F) to 72C (160F)
Ultimate Vacuum: as low as 10 Microns
Base unit Maximum Capacity: 1301 cubic inches, (21.323 Liters)
Construction: All components made of 304& 316 Stainless Steel.
Intake Fittings: JIC 37 Degree Vacuum Fittings
Max Vacuum -29.9inHg
High Polish Interior base
*Note: Column capacity may vary depending on the density of packed material and packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Cylinder Volume
Select Material
How Much Will Fit in Cylinder
Formula Volume x Weight of Water x Specific Gravity
Constants Weight of Water = 0.0360 (lbs / in3) Specific Gravity of =
